1965 Chevelle 396 Auto Posi Solid Wow Show And Go on 2040-cars

Auto blog

2016 Chevrolet Colorado Diesel First Drive [w/video]

The first thing you notice inside the diesel Chevy Colorado is that it's quiet. Almost too quiet. A lot has been done to quell noise and vibration with this new powertrain, and it shows – or rather, doesn't. There's some characteristic diesel clatter at idle, but even then it's distant and practically disappears as you start moving down the road. At full throttle, when the engine is at its noisiest, the sound isn't particularly diesel-like, just a pleasant intake breath. The accompanying smoothness is almost eerie. When we ask where all the noise went, Chevy's engineers, marketing guys, and PR reps all explain that this refinement is what Americans want. We're still not sure. This is a truck, after all, and the diesel pickup customer is different from the guy buying a diesel Cruze for his highway commute. Chevy contends that they're also not the same as the buyer of a Silverado HD. Although this 2.8-liter Duramax four-cylinder has been in service elsewhere around the globe, its first US application is in the Colorado and its GMC Canyon twin. The engine puts out 181 horsepower and 369 pound-feet of torque, and it does so unobtrusively as a result of a lot of modifications for our market. To keep normal diesel sensations out of the cabin, the intake and oil pan both get acoustic treatments. A new, thicker material is used for firewall sound deadening. Redesigned balance shafts have tighter tolerances to increase smoothness. The diesel powertrain is smoother than the Colorado's gasoline V6. One of the more interesting and certainly unexpected vibration-reduction changes is a special torque converter from German supplier LuK equipped with a centrifugal pendulum absorber. This pendulum spreads from the center of the torque converter as engine speed increases and is tuned to absorb the four-cylinder's second-order vibrations, not just those in a narrow frequency band. It does an admirable job, especially considering the engine's biggish, 0.7-liter cylinders, which lead to bigger vibrations. The result is a powertrain that's smoother than GM's (not particularly smooth) corporate V6, which is available in the standard Colorado. It's quieter than a Cruze diesel and even out-softens some gas direct-injection engines on the market. Paradoxically, it may be the most refined of all of the Colorados. No vibration comes through the steering wheel, pedals, floorboards, or even the rearview mirror. But you can tell it's a diesel when you hit the throttle.

1956 Corvette SR-2 factory racer profiled

The Chevrolet Corvette has earned its place as America's sports car, capable of taking on the best the world can throw at it. Much of that winning reputation was earned with victories on the track. Now, there was a chance to own an early piece of the nameplate's motorsport history in the form of a 1956 Corvette SR-2 racer, but some deep pockets were necessary to get it, with an estimate of $6.885 million. The story behind the SR-2 is fascinating. In 1956, famous General Motors designer Harley Earl's son was racing in a Ferrari. Obviously, that wasn't going to work given his father's position within the automaker, and Harley and Corvette engineer Zora Arkus-Duntov got to work on a faster racecar. Three were made. This one was reportedly the first, and for 1957 it also received a fuel-injected V8 making a claimed 331 horsepower and four-speed manual gearbox, according to "Corvette Mike," the owner and seller. The SR-2 went on display in Scottsdale, AZ appropriately timed to coincide with the big Barrett-Jackson auction there that wrapped up this weekend. The car wasn't part of that event; instead marque specialist Mike Vietro sold the racer as a private treaty sale. Company spokesperson Troy Worrell told Autoblog both the bids and identities of the bidders will remain undisclosed. The video above goes into even deeper detail about this rare, finned Vette or check out the car's full description for even more info.

Chevrolet planning new crossover between Equinox and Traverse

Chevrolet is taking a crowbar to its crossover lineup so it can slide in a new entry between the Equinox (shown) and the Traverse, according to a report in Automotive News. The current Equinox, a tweener compared to its rivals, will get smaller when the next-generation vehicle moves to the Delta platform that underpins the Chevrolet Cruze. The next Traverse will remain full-size, the liberated space between it and the smaller Equinox making room for a fourth offering from the brand. Designed on a short-wheelbase version of the Traverse platform, AN's sources say it will offer three-row seating, and its architecture will also serve the Cadillac SRX successor, the XT5, and the redesigned GMC Acadia. Yes, the Acadia will also come down a notch in size. Once all the rationalizing is complete, the Trax, Equinox, new crossover, and Traverse would give consumers a quicker, easier way to compare size and features with the competition. As it stands, the Ford Edge, Nissan Murano, Honda Pilot, and Toyota Highlander are all larger than the Equinox. The future offering and its two- and three-row seating options would take clear aim at those four vehicles, and the Equinox could focus on the Ford Escape, Honda CR-V, Toyota RAV4, and Jeep Cherokee segment. The new Chevy is predicted to go on sale at the end of next year as a 2018 model. Related Video: Featured Gallery 2015 Chevrolet Equinox View 14 Photos News Source: Automotive News - sub. req. Chevrolet Crossover cadillac srx gmc acadia chevy traverse cadillac xt5