2002 Chevrolet Cavalier Z24 Coupe 2-door 2.4l on 2040-cars

Auto blog

GM recalls 83,572 SUVs for ignition switch issue

General Motors is recalling 83,572 SUVs from the 2011 and 2012 model years over a potential ignition lock actuator issue. In affected vehicles, the actuator isn't the right size, which could cause the ignition to get stuck in the "Start" position, and then either due to a jarring event or a "cool interior temperature" the ignition could switch back to the "Accessory" position. Doing so would cause a loss of power assistance and the airbags might not deploy. This is a different ignition issue than the one that's been ongoing for the past year. GM said it expects that less than 500 vehicles suffer from the problem, but that the pool could include vehicles from 2007 through to 2014 that have already been fixed, but with defective parts. The 2011-2012 SUVs included in the National Highway Traffic Safety Administration notice: Cadillac Escalade, Escalade ESV, Escalade EXT, Chevrolet Avalanche, Silverado HD, Silverado LD, Suburban, Tahoe, GMC Sierra LD, Sierra HD, Yukon, and Yukon XL vehicles. GM will notify owners and dealers will inspect the ignition lock housing to see if it needs a free replacement. RECALL Subject : Ignition Lock Actuator may Bind Report Receipt Date: DEC 30, 2014 NHTSA Campaign Number: 14V827000 Component(s): ELECTRICAL SYSTEM Manufacturer: General Motors LLC SUMMARY: General Motors LLC (GM) is recalling certain model year 2011-2012 Cadillac Escalade, Escalade ESV, Escalade EXT, Chevrolet Avalanche, Silverado HD, Silverado LD, Suburban, Tahoe, GMC Sierra LD, Sierra HD, Yukon, and Yukon XL vehicles. In the affected vehicles, the ignition lock actuator may bind, making turning the key difficult or causing the ignition to get stuck in the "Start" position. CONSEQUENCE: If stuck in the "Start" position, the ignition may suddenly snap back into the "Accessory" position, causing a loss of engine, steering, and braking power, increasing the risk of a vehicle crash. If the vehicle is in a crash, the air bags may not deploy, increasing the risk of occupant injury. REMEDY: GM will notify owners, and dealers will inspect and replace the ignition lock housing, as necessary, free of charge. The manufacturer has not yet provided a notification schedule. Owners may contact GM customer service at 1-800-458-8006 (Cadillac), 1-800-222-1020 (Chevrolet), or 1-800-462-8782 (GMC). GM's number for this recall is 14696 for the original equipment, and 14912 for the service replacement parts.

GM plans new car family for global markets, $5B investment

Globalization remains all the rage in the auto industry, as manufacturers scramble to develop single vehicles that can easily be adapted to the world's disparate market places. Ford has been a champion of this movement, with its One Ford mandate, but now, its cross-town rival is getting in on the action, albeit on a smaller scale. General Motors has announced a $5-billion investment to develop a new Chevrolet-badged family vehicle for global growth markets, including Brazil, Mexico, India, and importantly, China. With the PRC listed as a target market for the new vehicle, it's no surprise that GM is teaming with its Chinese joint-venture partner, SAIC Motor, to develop the vehicle's architecture and engines. The first vehicles should be hitting dealers by 2019, with GM expecting to eventually move some two million units per year. "With a significant majority of anticipated automotive industry growth in 2015 to 2030 outside of mature markets, Chevrolet is taking steps to capitalize on that growth," GM President Dan Ammann said in the attached statement. "Strengthening Chevrolet's position through this major investment is consistent with our global strategy to ensure long-term profitable growth in the markets where we operate." GM is quite focused on developing markets for a new vehicle, going as far as to say that "mature markets" like the US aren't currently being considered for the new family vehicle. As for where it will be built, the press release specifically says it won't be exported to the US, meaning it will very likely be built abroad using parts from local suppliers. Read on for the official press release from General Motors. Chevrolet Strengthens Position in Growth Markets with $5 Billion Investment 2015-07-28 All-new vehicle family tailored to local customer requirements General Motors and SAIC Motor partnership further enhanced DETROIT – Chevrolet announced today it is investing $5 billion to strengthen its business in global growth markets through the development of an all-new vehicle family that will meet the rapidly changing demands of customers in these markets. "With a significant majority of anticipated automotive industry growth in 2015 to 2030 outside of mature markets, Chevrolet is taking steps to capitalize on that growth," said General Motors President Dan Ammann.

Detroit 3 to implement delayed unified towing standards for 2015

Car buyers have a responsibility to be well-informed consumers. That's not always a very simple task, but some guidelines are self-evident. If you live in a very snowy climate, you generally know a Ford Mustang or Chevrolet Camaro might not be as viable a vehicle choice as an all-wheel drive Explorer or Traverse, for example. If you want a fuel-efficient car, it's generally a good idea to know the difference between a diesel and a hybrid. But what if it's kind of tough to be an informed consumer? What if the information you need is more difficult to come by, or worse, based on different standards for each vehicle? Well, in that case, you might be a truck shopper. For years, customers of light-duty pickups have had to suffer through different ratings of towing capacities for each brand. For 2015 model year trucks, though, that will no longer be a problem. According to Automotive News, General Motors, Ford and Chrysler Group have announced that starting with next year's models, a common standard will be used to measure towing capacity. The Detroit Three will join Toyota, which adopted the Society of Automotive Engineers' so-called SAE J2807 standards way back in 2011. The standard was originally supposed to be in place for MY2013, but concerns that it would lower the overall stated capacity for trucks led Detroit automakers to pass. Ford originally passed, claiming it'd wait until its new F-150 was launched to adopt the new standards, leading GM and Ram to follow suit. Nissan, meanwhile, has said it will adopt the new standards as its vehicles are updated, meaning the company's next-generation Titan should adhere to the same tow ratings as its competitors. While the adoption of SAE J2807 will be helpful for light-duty customers, those interested in bigger trucks will still be left with differing standards. There is no sign of the new tow standards being adopted for the heavy-duty market.