2014 Chevrolet Captiva Sport Lt on 2040-cars

Auto blog

GM announces $7 billion Michigan factory investment, most going to EVs

GM announced a $7 billion investment in Michigan manufacturing, much of which is earmarked for EV production. Four sites are included, but the key elements are a new battery cell plant in Lansing and the conversion of GM's existing Orion Township facility to expand production of the forthcoming Chevrolet Silverado EV and its GMC Sierra sibling.  GM says it is the largest investment announcement in company history and that it will create 4,000 new jobs. It also says 1,000 jobs will be retained. "We are building on the positive consumer response and reservations for our recent EV launches and debuts, including the GMC Hummer EV, Cadillac Lyriq, Chevrolet Equinox EV and Chevrolet Silverado EV," said GM CEO Mary Barra.  GM says the Orion expansion and new battery plant will support an increase in full-size electric truck production capacity to 600,000 units. This is in addition to the Factory ZERO facility in Detroit that will also be constructing the electric Silverado and Sierra.  The Orion Township factory current builds the Chevrolet Bolt EV and EUV, and will continue to do so during the plant's conversion. GM did not indicate what will happen with the Bolts once that conversion is complete or whether all will continue to be built at Orion. They do not use the Ultium vehicle architecture. GM will build other EV models at three other factories that are under construction or being converted. They are located in Spring Hill, Tennessee, Ingersoll, Ontario, and Ramos Arizpe, Mexico. GM says that it will have the ability to produce 1 million electric vehicles by 2025. The Ultium Cells Lansing facility is a $2.6 billion joint investment by GM and LG Energy Solution. GM says it alone will create 1,700 jobs once fully operational by late 2024. It will join two other GM Ultium Cells battery factories currently under construction in the United States, one in Ohio and the other in Tennessee.  Not all of the $7 billion investment will be for EVs. It also announced $510 million of the total will go toward upgrading the Lansing Delta Township Assembly to produce the next-generation Chevrolet Traverse and Buick Enclave. Money will also go to upgrading Lansing Grand River Assembly.

2022 Chevrolet Silverado and GMC Sierra now cost more, again

GM Authority put Chevrolet and GMC pickup truck prices under the microscope, spying the same macroscopic issues none of us can avoid seeing: Price increases. The 2022 Chevy Silverado 1500 and 2022 GMC Sierra 1500 have been hit with their third price increases this year. The Heavy Duty versions of those same trucks have been given their fourth price increases this year. Starting with the light-duty options, they've been rung up for another $900 across the board, which breaks down to $800 added to the MSRP and $100 added to the destination charge. The mandatory cost for shipping a truck from the factory to the dealer is now $1,795. That destination fee is now more than 5% of the purchase price of the least expensive 2022 Silverado, the Regular Cab Work Truck trim with a Standard Bed and 2.7-liter turbocharged four-cylinder retailing for $36,395 after destination. And that price is $3,200 more than the initial list price from last December. At the other end, the Silverado ZR2 is up $3,400. Average that out, and the Silverado's MSRP has gone up by nearly $700 every month since initial pricing came out. On the GMC side, the bidding starts at $37,195 for the Regular Cab Pro trim with a Standard Bed, a $4,700 increase over pricing announced last October.  Stepping up a tow rating or two, the Silverado HD is now $1,100 more expensive — $1,000 tacked onto the MSRP, the destination charge plumped another $100 to $1,795. The Silvy 2500 HD now starts at $41,295. The Sierra HD turns the screw a few more degrees, going up by $2,100 after the $100 increase for destination. The low bar for the Sierra 2500 HD is $41,995, a $4,100 rise over the price when it hit dealer lots last summer. Whew. Anyone know where the exit is for this "new normal?" Related video:

2016 Camaro gets most revealing tease yet

Chevrolet started its long teaser campaign for the 2016 Camaro by just revealing the exhaust manifold and front frame, but as time has passed the company has slowly unveiled more. In the latest glimpse ahead of the pony car's May 16 debut, we're actually getting to see the model's profile completely undisguised. As suggested by the recent tease of the rear and hood, the 2016 Camaro wears a sharper, more angular design than the current model. This is especially the case when you look at the taut lines making up the rear. Chevy claims that the new shape underwent 350 hours of wind tunnel tests to be able to generate left lift, improve cooling and reduce wind noise in the cabin. A smooth underbody pan is among the aerodynamic tweaks, and it runs from underneath the front grille to the center of the Camaro. Chevy asserts that all of the changes at the front help reduce lift by 30 percent. Related VIdeo: 2016 Camaro is all about the Aero Total aerodynamic lift improved by 30 percent for improved stability 2015-05-11 DETROIT – After 350 hours of wind tunnel testing – often 24 hours a day – the new Camaro will slip more easily through the wind, and drivers of the Camaro SS will experience a marked improvement in reduced aerodynamic lift. These changes illustrate the lengths the aerodynamics team went to for improved performance, stability, cooling and lower wind noise intrusion "The importance of aerodynamics increases exponentially as we increase vehicle performance," said Kirk Bennion, Exterior Design manager. "As engine output increases, we need more engine cooling. As acceleration and top speeds climb, we need to reduce lift for better high-speed stability. However, we cannot make any changes at the expense of increasing drag, which can hurt fuel economy. "To balance these different aerodynamic targets, we tested literally hundreds of changes on the new Camaro, millimeters at a time." For example, the initial design called for the lower grille bars to be set at a 20-degree angle to the horizon. However, after meticulous testing, the team improved engine-cooling airflow by 1 percent by shifting the angle to 13 degrees – a change that achieved the airflow target while maintaining the original grille design. And rather than a traditional front air dam to reduce aerodynamic lift, the team developed a flush belly pan that stretches from the front grille to the center of the vehicle.