1995 Chevrolet Caprice Former Chp Cop Car Lt1 Motor on 2040-cars

Auto blog

GMC Canyon, Chevy Colorado diesels finally heading to dealers

Customers who have been waiting to receive their diesel-powered Chevrolet Colorados and GMC Canyons should be relived to hear that GM will finally start to ship them out of the Wentzville Assembly Plant. "The highly anticipated 2016 GMC Canyon diesel has begun shipping to dealers," a company spokesperson confirmed to The Detroit News. The trucks originally had a fall launch date, but a final review forced a delay in deliveries. The 2.8-liter four-cylinder diesel in the midsize trucks produces 181 horsepower and 369 pound-feet of torque, and the company touts the engine's low emissions. The Environmental Protection Agency and California Air Resources Board even put the mill through extra scrutiny with a real world test in the wake of VW's diesel scandal, and the Duramax passed with no problems. At that time, a Chevy spokesperson told Autoblog that the models' launch was on track. The Duramax engine adds $3,730 to the price of a comparable V6 model, but they're the most fuel-efficient pickups on the market. The EPA estimates the twins at 31 miles per gallon highway, 22 mpg city, and 25 mpg combined in two-wheel drive form and 29/20/23 with four-wheel drive. Buyers likely can't wait to finally experience these pickups after reading a heap of positive reviews. The Colorado diesel recently earned Motor Trend's Truck of the Year award. We also came away impressed with it during our First Drive and liked the Canyon during our Quick Spin. Related Video:

Next-gen Chevy Silverado and GMC Sierra may use carbon fiber

It's been generally accepted that the next generation of full-size GM trucks will use some sort of strong, lightweight material for the beds while retaining steel for the cab. While aluminum seems like the most obvious choice, according to Automotive News, the Chevy Silverado and GMC Sierra will incorporate both aluminum and carbon fiber in their beds. The publication cites sources from within GM, though it seems the introduction of this comparatively exotic material mix is still a few years off. While carbon fiber is both stronger and lighter than steel and aluminum, it takes significantly more time and money to produce, essentially relegating the material to small-volume cars. The main benefit for trucks is the resulting reduction in weight to improve fuel economy without sacrificing the tough, rugged capabilities truck buyers expect. The Ford F-150 made the switch to aluminum for the 2015 model year and it's proved highly successful. It seemed like it was only a matter of time before the competition followed suit. Automotive News says that the next-gen trucks will launch with aluminum beds and that it will take a couple of years before we'll see any carbon fiber incorporated into the design. Even then, only look for the composite material on higher-trim models, with a trickle down to lower-spec trucks possible further in the future. In 2011, GM announced it was working with Japan-based Teijin Limited on a carbon fiber reinforced thermoplastic. There's a good chance that material's introduction will be on trucks. Related Video: News Source: Automotive News Plants/Manufacturing Rumormill Chevrolet GM GMC Truck

GM executive chief EV engineer says reducing cost of plug-in vehicles is 'huge priority'

As we know, another major automaker investing heavily in electrified vehicles is General Motors, and it's doing things much differently than rivals BMW, Ford or Nissan. The Chevrolet Volt extended-range EV is a modest seller at its $35,000 sticker price but a huge hit with owners. The Chevy Spark BEV, still in limited availability, puts smiley faces on its owners and drivers. The just-introduced Cadillac ELR, a sharp-looking, fun-driving $76,000 luxocoupe take on the Volt's EREV mechanicals, has admittedly low sales expectations. With this interesting trio in showrooms and much more in the works, the third vehicle electrification leader I collared for an interview at Detroit's North American International Auto Show (see #1 and #2) was Pam Fletcher, GM's executive chief engineer, Electrified Vehicles. ABG: Why do your EREVs need four-cylinder power to extend their range when BMW's i3 makes do with an optional 650 cc two-banger? "We designed [the Volt and the ELR] to go anywhere, any time" - Pam Fletcher PF: I get that question all the time: why not something smaller? You don't really need that much. You use the electric to its ability, then you just need to limp. But we designed those cars to go anywhere, any time, and we don't want their performance to be compromised. If you're driving through the mountains, we don't want you to be crawling up grades, or to be limited on any terrain. So it's optimized to be able to travel literally the biggest grades and mountain roads around the globe at posted speeds. Because what if you can't? Another good reason: when the engine is on, you have to run it wide open throttle, max speed, most of the time. And while we can do a lot with acoustics, and the ELR has active noise cancelation, a small-displacement, low cylinder-count engine at high speed, high load all the time isn't something you want to live with. That's how we came up with the balance we did among the key factors of performance, NVH [noise, vibration and harshness] and range. ABG: Where you go from here? Is the range-extender engine due for an update? PF: We know and love the current Volt, and there is still a lot of acclaim about it, so we think it's a good recipe. But we are heavily in the midst of engineering the next-generation car, which I think everyone will love and be excited about.