1967 Chevrolet Caprice on 2040-cars

Auto blog

1972 Dodge Challenger on an M1009 CUCV military frame is YES

The subject of this post is cause for celebration, not reason to ask "But why?" We don't know why this random Craigslist seller chose to marry the body of a 1972 Dodge Challenger with the frame and axles from a 1987 Chevrolet M1009 military vehicle. We're here to appreciate it, thanks to The Drive, and maybe spend some time after dinner considering whether to buy it. Now that we're on the same page, an owner in Tucson wants to rid his garage — or his Bullet Farm — of what appears to be an exceptionally well built conversion. Starting from the bottom, the M1009 CUCV, for Commercial Utility Cargo Vehicle or "Cuckvee," emerged from a program turning K5 Blazers into supply rigs that were meant to support hardcore hardware like the AM General Humvee. The M1009 got GM's 6.2-liter Detroit Diesel V8, a TH400 transmission, an NP-208 chain-driven transfer case, a 10-bolt rear axle and 3.08 gears. Produced from 1983 to 1987, they returned "less than desirable" results in the field and the military unloaded them. Not much of that remains for this build. The diesel got dropped, replaced by a 5.7-liter GM gasser with a four-barrel carb and long-tube headers, shifting though a 4L80E automatic transmission attached to a U.S. Shift Quick 1 transmission controller in the cabin. The seller doesn't mention output, but if it's a more recent Chevy 350 then it'll certainly provide a healthy bump over the maximum 160 horsepower from the diesel, especially running through a custom Flowmaster dual exhaust. An NP-205 two-speed transfer case switches between 2H, 4L, and 4H. The Dana 44 front and Dana 60 rear axles feature lockers and 3.52 gearing in back. Skyjacker Black Max provides the suspension to keep the 37-inch BFG KM2 on the pavement or the dirt. About 11,000 miles ago the owner rebuilt and upgraded the drivetrain, installing new accessories like a high-rise intake, four-core radiator, new alternator and Holley fuel pump. Losing the K5 body for an E-body Challenger cap means losing M1009 features like the rifle rack and gas can mounts. But you gain style, something real hard to find on a vehicle stout enough to back you up when you tell the crew, "I've been to hell and I'm going back." As part of that rebuild a few miles back, the minimalist interior got all new panels, dash and custom gauges, headliner, seats, and a Sony audio system with Alpine amps, a sub, and Kenwood speakers.

Recharge Wrap-up: Ford HQ gets giant solar array, Chevy City Express gets 24 MPG city

Ford will be building Michigan's largest solar array at its Dearborn headquarters. With funding from DTE Energy, the solar carport will provide covered parking, as well 30 charging stations for electric vehicles. The array is expected to generate 1.13 million kWh per year for Ford's operations, and offset 794 metric tons of carbon emissions. Read more in the press release below. Chevrolet announced the fuel economy for the 2015 City Express, at 25 mpg combined. The cargo van is rated at 24 mpg in the city, and 26 mpg on the highway. Chevy credits the van's inline four-cylinder engine and continuously variable transmission for its impressive city mileage. For its customers - which are mainly businesses - "The fuel economy of the City Express will help stretch their dollar at the pump and give them the flexibility to invest the savings back into their business," says Chevrolet's Ed Peper. The City Express starts at $22,950. Read more in the press release below. Engineers at the University of Wisconsin have developed an efficient engine that runs on a diesel-gas blend. The engine, which uses a computer to control the blend proportions, is about 15 percent more efficient than the any diesel engine according to mechanical engineering professor Rolf Reitz. The team has put the experimental reactivity controlled compression ignition (RCCI) engine in a demonstration car - a 2009 Saturn. "This vehicle can do 50 miles per gallon," says Reitz, who believes the system could be improved further. Read more at Wisconsin Public Radio. The Southeast Alternative Fuel Conference and Expo will take place in October in Raleigh, North Carolina. Held at the NC Clean Energy Technology Center from October 22-24, the event will feature a variety of exhibitors, speakers and, most importantly, alternatively powered vehicles. "The three day conference will be a one-stop shop for fleet and transportation related decision makers to learn about return on investment, efficiency and alternative transportation fuels such as biodiesel, electricity, ethanol, propane and natural gas," says Anne Tazewell of the NC Clean Energy Technology Center. If you can't make it to Raleigh for the Expo, you can still enter to win a free two-year lease of a Nissan Leaf at the Center's website. Learn more about the event in the press release, below.

GM patent reveals new two-stage turbocharger

Modern turbochargers may be some of the best ever made, but performance is something that engineers are always trying to improve. According to GM Inside News, General Motors (GM) is hoping to alleviate some of the negative aspects of a two-stage turbocharger setup with a newly-patented design. The patent, that was filed on May 19, 2016, reveals a clever bypass system that allows the engine, a four-cylinder unit, to optimize both the low-pressure and high-pressure inlets for its respective functions. According to the filing, a conventional two-stage turbocharger setup is engineered to allow both turbines to operate simultaneously at low and mid engine speeds. At high engine speeds, only the low-pressure turbine works. The setup can't isolate either the low or high pressure side, which can impair low-end performance. GM's new two-stage turbocharger setup looks to eliminate this by linking the high-pressure turbo to the exhaust manifold through the high-pressure inlet duct. The low-pressure turbo is attached to the high-pressure turbo by a low-pressure inlet duct, which is linked to a connecting channel. A single actuator that is housed in the exhaust manifold creates a bypass that can opens the high-pressure inlet or close the connecting channel. Depending on what the engine load and speed is, the ECU guides the actuator—a single rotating spindle with discs corresponding to flanges on the high and low pressure sides—to isolate one of the two turbos. Isolating the turbos allow the respective inlets to be engineered for the best possible fluid dynamic performance. The setup should increase performance and decrease lag. There's no word on what car this setup will make an appearance on, but it will most likely be used in premium vehicles before trickling down to the rest of GM's vehicles. Related Video: News Source: GM Inside News, AutoGuide via GM Authority Cadillac Chevrolet GM Technology Sedan turbo patent engine turbocharging