2014 Chevrolet Camaro 2lt on 2040-cars

Auto blog

2016 Camaro gets most revealing tease yet

Chevrolet started its long teaser campaign for the 2016 Camaro by just revealing the exhaust manifold and front frame, but as time has passed the company has slowly unveiled more. In the latest glimpse ahead of the pony car's May 16 debut, we're actually getting to see the model's profile completely undisguised. As suggested by the recent tease of the rear and hood, the 2016 Camaro wears a sharper, more angular design than the current model. This is especially the case when you look at the taut lines making up the rear. Chevy claims that the new shape underwent 350 hours of wind tunnel tests to be able to generate left lift, improve cooling and reduce wind noise in the cabin. A smooth underbody pan is among the aerodynamic tweaks, and it runs from underneath the front grille to the center of the Camaro. Chevy asserts that all of the changes at the front help reduce lift by 30 percent. Related VIdeo: 2016 Camaro is all about the Aero Total aerodynamic lift improved by 30 percent for improved stability 2015-05-11 DETROIT – After 350 hours of wind tunnel testing – often 24 hours a day – the new Camaro will slip more easily through the wind, and drivers of the Camaro SS will experience a marked improvement in reduced aerodynamic lift. These changes illustrate the lengths the aerodynamics team went to for improved performance, stability, cooling and lower wind noise intrusion "The importance of aerodynamics increases exponentially as we increase vehicle performance," said Kirk Bennion, Exterior Design manager. "As engine output increases, we need more engine cooling. As acceleration and top speeds climb, we need to reduce lift for better high-speed stability. However, we cannot make any changes at the expense of increasing drag, which can hurt fuel economy. "To balance these different aerodynamic targets, we tested literally hundreds of changes on the new Camaro, millimeters at a time." For example, the initial design called for the lower grille bars to be set at a 20-degree angle to the horizon. However, after meticulous testing, the team improved engine-cooling airflow by 1 percent by shifting the angle to 13 degrees – a change that achieved the airflow target while maintaining the original grille design. And rather than a traditional front air dam to reduce aerodynamic lift, the team developed a flush belly pan that stretches from the front grille to the center of the vehicle.

Watch a 2015 Corvette Z06 run the quarter in 11.7 seconds

We're not writing about this because it's an amazing run, we're writing about it because it appears to be the first run. Someone took a 2015 Corvette Z06 to Royal Purple Raceway in Baytown, Texas and blasted it down through the quarter mile. It's still wearing the dealer number in wax pen on the windshield and dealer plates, so this example is fresh from the mold. It's also a seven-speed manual. General Motors said the row-your-own Z06 can do the 'strip in 11.2 seconds, and they undoubtedly had a professional driver and more than one run to set that time. To have Just Some Guy show up at the raceway and do an 11.7 at 120.54 mph on his first run means we expect good things to come as Z06s get delivered to their owners. Check out the run in the video.

2021 Cadillac Escalade, GMC Yukon, Chevy Suburban/Tahoe recalled for stall risk

General Motors is recalling just shy of 15,000 2021 Cadillac Escalade & Escalade ESVs, Chevrolet Suburbans and Tahoes, GMC Yukons and Yukon XLs that were shipped with fuel pumps that were built with a batch of what may be faulty electronic control modules. A pump with a bad module can result in intermittent function, resulting in drivability issues and potential stalls. No serious incidents or injuries have been associated with the issue.  GM says it discovered the issue after analyzing early recall data for the 2021 model SUVs and discovering an unusually high failure rate for fuel pumps manufactured by a single supplier – Vitesco. The company was able to identify the batch and initiate a recall campaign targeting just those vehicles.  "After reviewing the field data, GM determined there were 617 potentially relevant complaints, which were received between April 15, 2020 and August 24, 2021," the company's recall report said. "229 of these complaints reported a stall while standing or moving. No accidents or injuries associated with this condition were found." Any SUVs built with pumps from that batch but not yet sold are being held at dealers for replacement parts. It may take some time for GM to source replacements due to the ongoing electronic parts shortages.  "We are working with the supplier to obtain the required parts as quickly as possible," GM said in its notice to dealers. "When sufficient quantity of parts are available, the recall bulletin will be released and dealers can begin repairing vehicles."