2010 Chevrolet Camaro Ss Coupe 2-door 6.2l on 2040-cars

Auto blog

The Army goes off-roading with a hydrogen Chevy Colorado

The Chevrolet Colorado is joining the service. General Motors is working with the US Army Tank Automotive Research, Development & Engineering Center (TARDEC) to build a Colorado powered by a commercial hydrogen fuel cell stack, and the Army will use it in "extremes of daily military use for 12 months." TARDEC is the department that tests "advanced military automotive technology" and integrates them into ground systems. The aim is to see how well the benefits of a fuel cell vehicle can be adapted to the battlefield; hydrogen-powered vehicles are quiet, torquey, produce water, and can be used to provide electricity in the field. GM says the design sketch above "foreshadows" the Colorado that will go to boot camp and beyond, making it clear that this won't be the average midsize pickup. The press release below has more. Related Video: GM and U.S. Army to Demonstrate Extreme Off-Road Hydrogen Fuel Cell Chevrolet Colorado Agreement focused on proving unique utility and viability of fuel cell propulsion WARREN, Mich. 2015-11-19 – General Motors and the U.S. Army Tank Automotive Research, Development & Engineering Center (TARDEC) are modifying a Chevrolet Colorado midsize pickup truck to run on a commercial hydrogen fuel cell propulsion system and will expose the truck to the extremes of daily military use for 12 months. "Hydrogen fuel cell technology is important to GM's advanced propulsion portfolio, and this enables us to put our technology to the test in a vehicle that will face punishing military duty cycles," said Charlie Freese, executive director of GM's Global Fuel Cell Engineering activities. Fuel cell propulsion has very high low-end torque capability useful in off-road environments. It also offers exportable electric power and quiet operation, attractive characteristics to both commercial and military use. "The potential capabilities hydrogen fuel cell vehicles can bring to the Warfighter are extraordinary, and our engineers and scientists are excited about the opportunity to exercise the limits of this demonstrator," said TARDEC Director Paul Rogers. "FCVs are very quiet vehicles, which scouts, special operators and other specialties place a premium," he said. "What's more, fuel cells generate water as a by-product, something extremely valuable in austere environments." GM and TARDEC have fuel cell development and research facilities located 20 minutes apart in Pontiac and Warren, Mich.

GM recalls 3.6 million vehicles for airbag-software problems

The Basics: General Motors is recalling 3.64 million vehicles across its lineup for an airbag-related issue. The recall covers the 2014-2015 Buick LaCrosse, Chevrolet SS, and Spark EV; 2014-2017 Chevrolet Corvette, Trax, Caprice PPV, Silverado 1500, Buick Encore, and GMC Sierra 1500; and 2015-2017 Chevrolet Tahoe, Suburban, Silverado HD, GMC Yukon, Yukon XL, Sierra HD, Cadillac Escalade, and Escalade ESV. The Problem: Affected vehicles have a sensing and diagnostic module that controls the airbags and seat-belt pretensioners. The software it uses has a defect that can prompt the module to run a diagnostic test under specific driving conditions, which will also deactivate the front airbags and pretensioners. This means that it would be possible for those safety systems to not activate in a crash, potentially leading to injury or death. Injuries/Deaths: General Motors began an investigation that led to the recall after a 2014 Silverado was involved in a crash in which the airbags did not deploy. No information was given as to injuries or deaths. The Fix: Owners can bring their vehicles to a local General Motors dealer where a software update will be installed to fix the issue. The fix will be free of charge. If you own one: General Motors will contact owners of affected cars, and owners can check whether their vehicles are affected by visiting entering their vehicle identification numbers at either the GM Owner Center website or the NHTSA website. Owners can then schedule a time to have the update installed. Related Video:

This is how GM is hiding new Chevy Volt in public

General Motors is letting the public know that, well, it's not about to let the public know anything else about the next-generation Chevrolet Volt. But the automaker is willing to talk about its camouflaging process for upcoming versions of the extended-range plug-in. So it's a half-hearted secret, at best. GM actually has a "camouflage engineer" charged with creating ways to disguise the styling of new vehicles. In the Volt's case, the company is applying black and white swirly color patterns on top of the materials, such as plastics, vinyl and foam, that are used liberally across the body. It's all part of a teaser campaign that started last month with pictures of part the 2016 Volt. Earlier this month, GM said it was keeping track of Volt drivers' habits as it works on the next-gen model. The company noted that more than four out of five trips are being made in all-electric driving mode, and that 60 percent of Volt owners use a plain-old 100-volt outlet to recharge their cars. The car is slated to make its global debut at Detroit's North American International Auto Show next January, and the early word is that performance and all-electric range will be improved (we should hope so). The car will also be sleeker. By how much, we can't tell yet, because of those darn swirly patterns. GM's got more non-details in its press release below. Engineers charged with hiding styling while vehicle testing proceeds in public DETROIT – The styling of the next-generation Chevrolet Volt is one of the automotive world's best-kept secrets. Keeping customers and media eager to see the successor to the groundbreaking original at bay until the new Volt debuts at the North American International Auto Show in Detroit in January is tricky business. First, it is engineers, not designers, who are charged with creating camouflage that balances styling secrecy with the need to validate the Volt and its systems in public. "If it were up to me it would be a shoebox driving down the road," said Lionel Perkins, GM camouflage engineer. "The design team wants us to cover more of the vehicle and the engineering team needs to have enough of the vehicle's weight and aero exposed so that the tests in the development process are consistent with the product that will come to market." The engineers responsible for the "cool" designs covering the car might deserve style points but their efforts are intended strictly to hide the metal beneath.