2000 Chevrolet Camaro Convertible 2-door 3.8l on 2040-cars

Auto blog

GM drops diesel engines for 2020 Chevy Equinox and GMC Terrain crossovers

GM is officially discontinuing the diesel engine in the Chevy Equinox and GMC Terrain for the 2020 model year. The 1.6-liter turbodiesel was always an oddball of an engine in the compact crossover segment, and now the experiment has come to an end. The Car Connection initially reported the news, and a GMC spokesperson, Stuart Fowle, confirmed it to us this morning.  “A huge majority of our Terrain customers have opted for one of our two gas engines," says Fowle. We canÂ’t say this eventuality comes as a massive surprise, as we saw news from couple of months ago that GM was dropping all-wheel drive from the diesel-powered cars for 2020. Low demand was cited as the reason for that cull, and itÂ’s the same for the little GM crossovers this time around, too. These vehicles were the only ones powered with a diesel engine in their class, but thatÂ’s going to be changing. Just as GM is going away from the diesel, Mazda is finally bringing its diesel to market in the CX-5. YouÂ’ll only be able to get that engine in the most expensive ($42,045) trim level, combined with all-wheel drive, though. The cheapest Equinox diesel starts at a comparably low $30,795. ThatÂ’s a $2,400 upcharge over the base 1.5-liter turbo four-cylinder, and the value is questionable. Mileage is better, but diesel fuel is more expensive. Towing capability didnÂ’t increase over the base engineÂ’s 1,500-pound capacity, but the extra torque around town was nice. As diesels go in the U.S., this one was rather rough and noisy, possibly contributing to some turning their noses up after a test drive. Perhaps another reason for its demise was that the much quicker 2.0-liter turbo Equinox was only $100 more than the diesel. This engine offered significantly better towing at 3,500 pounds, too. You can read all about what we thought of the diesel in our first drive review here, but the 2019 model year is the last one if you had it on your shortlist. This article has been updated to indicate the source.

Chevy Bolt, GM's 200-mile EV, could debut in Detroit

It's not news that General Motors is working on a $30,000 electric vehicle with a 200-mile range. Then-CEO Dan Akerson said as much back in 2013. What we've heard before is that this mystery EV will be based on the Chevrolet Sonic and will will arrive in 2017. So, if that's all correct, then it would make sense that confirmation of this plan would come at the 2015 Detroit Auto Show, which is just around the corner. And lookee here... The Wall Street Journal is reporting that GM will unveil a concept Chevy Bolt at the Detroit show on Monday. That name sure makes sense, too, since GM registered that trademark back in August. According to the Journal, the rumored numbers – 200-mile range, $30,000 price – are still what's expected. Some new purported details are that the battery will come from LG Chem, which also makes the Volt's batteries, and that the Bolt will be a crossover that could be sold around the world. This all smacks of a preemptive strike against the Tesla Model 3, which is also due around 2017. Currently, GM sells the Spark EV in limited areas of the US, despite a lot of excitement for wider availability. To sell a 200-mile EV for $30,000 means that GM and LG Chem will likely have drastically reduced the cost of making a big plug-in vehicle battery. What this means for the new Volt and GM's future plans is something we're more than a little excited about to learn more of on Monday, the same day that we get to see the redesigned Chevy Volt for the first time. Well, aside from the CES teaser. Green Chevrolet Crossover Electric 2015 Detroit Auto Show Chevy Bolt bolt

Is the skill of rev matching being lost to computers?

If the ability to drive a vehicle equipped with a manual gearbox is becoming a lost art, then the skill of being able to match revs on downshifts is the stuff they would teach at the automotive equivalent of the Shaolin Temple. The usefulness of rev matching in street driving is limited most of the time – aside from sounding cool and impressing your friends. But out on a race track or the occasional fast, windy road, its benefits are abundantly clear. While in motion, the engine speed and wheel speed of a vehicle with a manual transmission are kept in sync when the clutch is engaged (i.e. when the clutch pedal is not being pressed down). However, when changing gear, that mechanical link is severed briefly, and the synchronization between the motor and wheels is broken. When upshifting during acceleration, this isn't much of an issue, as there's typically not a huge disparity between engine speed and wheel speed as a car accelerates. Rev-matching downshifts is the stuff they would teach at the automotive equivalent of the Shaolin Temple. But when slowing down and downshifting – as you might do when approaching a corner at a high rate of speed – that gap of time caused by the disengagement of the clutch from the engine causes the revs to drop. Without bringing up the revs somehow to help the engine speed match the wheel speed in the gear you're about to use, you'll typically get a sudden jolt when re-engaging the clutch as physics brings everything back into sync. That jolt can be a big problem when you're moving along swiftly, causing instability or even a loss of traction, particularly in rear-wheel-drive cars. So the point of rev matching is to blip the throttle simultaneously as you downshift gears in order to bring the engine speed to a closer match with the wheel speed before you re-engage the clutch in that lower gear, in turn providing a much smoother downshift. When braking is thrown in, you get heel-toe downshifting, which involves some dexterity to use all three pedals at the same time with just two feet – clutch in, slow the car while revving, clutch out. However, even if you're aware of heel-toe technique and the basic elements of how to perform a rev match, perfecting it to the point of making it useful can be difficult.