1996 Chevrolet Camaro Z28 Coupe 2-door 5.7l No Reserve!! on 2040-cars

Auto blog

AEV-upgraded GMC Canyon AT4X, Chevy Colorado ZR2 appear in spy photos

As with the previous generation, it appears the 2023 Chevy Colorado ZR2 will be getting a special AEV version. Not only that, but its twin, the GMC Canyon AT4X will get one, too. And as these spy photos show, they'll have some additional off-road accessories included, as well as bigger tires. We'll start with the GMC Canyon. The first example of the truck without any camouflage is not quite fully upgraded like the camouflage vehicles. But it has one part not seen on the others: the AEV snorkel. 2023 Chevy Colorado ZR2 AEV Bison prototype View 13 Photos The two appear to be riding on larger Goodyear Wrangler Terrain MT tires. These look like 35-inch examples -- 2 inches larger than the biggest tires available on the ZR2 and AT4X. They're also mounted on beadlock capable wheels. Besides the bigger tires, both trucks also feature a new bed-mounted spare tire. It's a full-size spare, and unlike past bed-mounts, this one places the tire flush against the cab. The benefit of moving the spare to the bed is departure angle. And while this position looks a little less like how trophy trucks carry their spares, it should provide better cargo space. Rear visibility probably isn't great, though. Generalizing based on what we know about the current ZR2 Bison, the new AEV trucks will probably get unique grilles, steel bumpers, fender flares, a suspension lift and possibly even axle ratio changes. Additional options such as a winch could be offered, too. We expect the trucks will be revealed within the next year, since the base trucks have already been shown, and these are just upgraded versions of those trucks. Related Video: 2023 Chevrolet Colorado walkaround

Is the skill of rev matching being lost to computers?

If the ability to drive a vehicle equipped with a manual gearbox is becoming a lost art, then the skill of being able to match revs on downshifts is the stuff they would teach at the automotive equivalent of the Shaolin Temple. The usefulness of rev matching in street driving is limited most of the time – aside from sounding cool and impressing your friends. But out on a race track or the occasional fast, windy road, its benefits are abundantly clear. While in motion, the engine speed and wheel speed of a vehicle with a manual transmission are kept in sync when the clutch is engaged (i.e. when the clutch pedal is not being pressed down). However, when changing gear, that mechanical link is severed briefly, and the synchronization between the motor and wheels is broken. When upshifting during acceleration, this isn't much of an issue, as there's typically not a huge disparity between engine speed and wheel speed as a car accelerates. Rev-matching downshifts is the stuff they would teach at the automotive equivalent of the Shaolin Temple. But when slowing down and downshifting – as you might do when approaching a corner at a high rate of speed – that gap of time caused by the disengagement of the clutch from the engine causes the revs to drop. Without bringing up the revs somehow to help the engine speed match the wheel speed in the gear you're about to use, you'll typically get a sudden jolt when re-engaging the clutch as physics brings everything back into sync. That jolt can be a big problem when you're moving along swiftly, causing instability or even a loss of traction, particularly in rear-wheel-drive cars. So the point of rev matching is to blip the throttle simultaneously as you downshift gears in order to bring the engine speed to a closer match with the wheel speed before you re-engage the clutch in that lower gear, in turn providing a much smoother downshift. When braking is thrown in, you get heel-toe downshifting, which involves some dexterity to use all three pedals at the same time with just two feet – clutch in, slow the car while revving, clutch out. However, even if you're aware of heel-toe technique and the basic elements of how to perform a rev match, perfecting it to the point of making it useful can be difficult.

Why an independent rear suspension for GM's new, full-sized SUVs wasn't easy

A Motor Trend report last month laid out how Cadillac's 4.2-lier twin-turbo Blackwing V8 could be an orphan due to cost concerns in the GM empire. Last-minute chassis changes to Cadillac's new sedans and XT6 crossover led to engine bays that couldn't fit the Blackwing. On the SUV side, according to the report, the new independent rear suspension for big people haulers cost so much to implement that GM ruled out reworking the Escalade to accept the Blackwing. At least one commenter rightly asked how could a suspension swallow that much money. A new piece in Motor Trend has the answer. The excellent Alissa Priddle spoke to Tim Herrick, GM's executive chief engineer for full-size trucks, about why the clean-sheet IRS cost "multimillions of dollars."  First, GM would need to build a new body shop at the Arlington, Texas plant that assembles the automaker's big SUVs to stamp the numerous wholly new parts and panels accommodating an IRS. Then GM would need to design and pay for a new assembly process. On top of those up-front costs, there was the incremental cost of the four-link IRS components being more expensive than those in the trucks' former leaf-sprung solid axles. Herrick endured so many rejections for so long that he remembers the date and time when he got approval for the new unit. He said it came down to a meeting where he told a higher-up, "I'll make you a deal: If we get to the reveal, or if we launch this and you think this was a dumb idea, I'll hand you my badge and let you walk me out." Head to Motor Trend to read the full story. Based on Herrick being on stage to help present the new SUVs to the press, and on our First Ride in the new Chevrolet Tahoe and Suburban at GM's Milford Proving Grounds, it appears this will have a happy ending for all involved. Furthermore, since Herrick worked on the T1 platform that supports the big SUVs as well as the light- and heavy-duty pickups, he understood the demands on the commercial side, too. That could be why when Roadshow asked Tim Asoklis, chief engineer of the Tahoe and Suburban, if the new IRS could endure life in the Chevrolet Silverado and GMC Sierra, Asoklis answered, "Oh, absolutely." Related Video: