1995 Chevrolet Camaro Z28 Convertible on 2040-cars

Auto blog

2020 Chevy Silverado, GMC Sierra recalled due to faulty brake component

General Motors is recalling 2020 Chevrolet Silverado 1500 and GMC Sierra 1500 pickups to fix a defect in the trucks' brake system. Certain Silverado and Sierra pickups were produced with brake-caliper bolts that were not heat-treated. Without heat-treating, the bolts are weaker than they should be, and there is a risk that they could fail, which would affect the trucks' braking performance, possibly leading to a crash. In total, 20,352 vehicles are affected. Owners of affected trucks will be contacted by GM. Dealers will inspect the bolts and replace those that are defective. Related Video:      

2016 Chevrolet Camaro: Notes from the reveal

The 2016 Chevrolet Camaro debuted Saturday evening in Detroit at an enthusiast-oriented event near the city's IndyCar course. While the big news was the Camaro's 200-pound weight loss, tighter chassis, and a snorting new V8, plenty of other morsels of Camaro info came out. Here's some of the more interesting stuff we heard. • The 2.0-liter inline four-cylinder is the first turbocharged engine in a Camaro. • The LT1 borrowed from the Corvette Stingray marks the third time a Camaro has used an engine with that badge. It was previously used in 1970-72 (Z/28), 1993-97 (Z/28), and 1996-97 (SS). • The Camaro was revealed in a tent before nearly 1,000 enthusiasts, General Motors executives (including CEO Mary Barra) and mere feet from the Grand Prix course where IndyCars will run in two weeks. • Chevy hopes to continue to attract new customers with the Camaro and said 63 percent of the fifth-generation buyers were new to the brand. • GM product boss Mark Reuss neatly summed up the Camaro's handling character. "It's wicked fast and extremely nimble." • Reuss on the design goal: make it "look like a car for tomorrow instead of a car from yesterday." • Reuss' first car was a 1967 Camaro, and he's reiterated his passion for the car. "People want to be seen in a Camaro, and that never goes away." • Chevy North America president Alan Batey said he plans to line up a red Camaro as soon as the order bank opens. We assume he'll have early access to that. • Though the appearance is similar, the sixth generation of the Camaro appears a little sleeker and is more aerodynamic thanks to 350 hours in the wind tunnel. Only two parts, the SS badge and the rear bow-tie emblem, are carryover. • Al Oppenheiser, the Camaro's chief engineer, said most of the options (except Magnetic Ride Control, which is SS exclusive), will be offered on the inline four. The engine will be capable of propelling the Camaro to a sprint to 60 miles per hour in well under six seconds. "We don't want to ... make it feel like an excuse car," he said. • Without revealing specifics, Oppenheiser said every Camaro variant will be faster than the model it replaces. •The interior is vastly improved. We got an up-close look in the cabin of one of the cars revealed with a red and white layout, and the materials are much better. The setting is more colorful, and 24 different ambient lighting shades are available. Related Video:

Want a V8 on the cheap? Buy a work truck

In case you didn't notice, V8 cars have gotten pretty expensive. If you want a modern muscle car like the Dodge Challenger R/T, Ford Mustang GT, or Chevy Camaro SS, you'll need between $34,000 and $38,000 for a stripped out example of one. The cheapest of those is the Challenger, and the priciest is the Camaro. These are also the cheapest V8 cars the companies offer. But if you absolutely have to have a V8 for less, there is an option, work trucks. As it turns out, all of the Big Three offer their most basic work trucks with V8s. And because they're so basic, they're pretty affordable, especially when sticking with the standard two-wheel drive. A Ram 1500 Tradesman with a V8 can be had for as little as $29,840, which is a little more than $4,000 less than a Challenger R/T. For a bit more at $30,275, you can have a Chevy Silverado W/T, almost $8,000 less than a Camaro SS. The most expensive is the V8 Ford F-150 starts at a starting price of $30,670, which is a bit over $5,000 less than the Mustang. Of course you'll be in an ultra bare bones vehicle with few comforts, and the price will go up if you add stuff, but we're bargain hunting here, and sacrifices are sometimes necessary. Besides, what you lose in comfort, you gain in loads of cargo space and towing (try to look at the bright side). Also, as a side note, all three trucks are available with optional electronic locking rear differentials. At the discounted price of these trucks, you still get a heaping helping of power. The most potent of the trio is the Ram 1500 Tradesman with 395 horsepower and 410 pound-feet of torque generated by a 5.7-liter V8. Compared with the Challenger R/T, the Ram is up by 20 horsepower and they're tied for torque. The value proposition is even more stark between the two vehicles when looking at the price per horsepower. Each pony in the Ram costs $75.54, while the Challenger charges you $90.91. The Challenger is also more expensive per horsepower than its close competitors. The F-150's 5.0-liter V8 is just barely behind the Ram with 395 horsepower and 400 pound-feet of torque. That's still more power than the Challenger, and it matches the torque of the 2017 Mustang GT. On the down side, it still would be down 20 horsepower on that same 2017 Mustang, and it's behind by 60 horsepower and 20 pound-feet on the new 2018 Mustang GT. The F-150 also just edges out the Mustang in the dollar per horsepower measure.