1979 Camaro Rally Sport on 2040-cars
Summerville, South Carolina, United States
Body Type:Coupe
Vehicle Title:Clear
Engine:355ci
Fuel Type:Gasoline
For Sale By:Private Seller
Make: Chevrolet
Model: Camaro
Trim: Rally Sport
Options: Leather Seats, CD Player
Power Options: Air Conditioning
Drive Type: Automatic
Mileage: 99,999
Exterior Color: Black/Grey
Disability Equipped: No
Interior Color: Carmine
Warranty: Vehicle does NOT have an existing warranty
Number of Cylinders: 8
Im selling a 1979 Chevy Camaro, Rally Sport. The body and the interior is all original, however the block doesnt match the car. The motor is a 1979 gear driven Chevy 355ci. The motor was rebuilt before i purchased this car, bored .5 over, it has a mild cam, aftermarket lifters, rollers and rockers. Im not 100% but i do think the heads are aftermarket as well. On the motor sits a new edelbrock intake manifold and a used Edelbrock 650carb. I also installed a new MSD HEI distributor. The tranny has a little over 20k miles on it, it has a hardened sprocket kit as well as a shift kit. This car is equipt with A/C, however it is not hooked up due to a freon leak. The heat works amazingly, and the rear defrost even works. The interior is all original, carmine red in color has some minor issues (headliner is good but faded, passenger seat's front and rear have a small tear, carpet is doable, not perfect, and there are some discolorations on the dash along with a small repairable crack). I currently have the headliner trim out of the car i was going to paint and swap everything to black but have not taken the time to do so. I have all of the trim pieces that will obviously go along with the car. I also have the original hood that i replaced for the z28 tear-drop look(functionable). This car has minor rust, floor boards are extremely solid and the only rust issue that I have found so far is a little surface in the trunk which I did replace the gasket in and the common under the hood surface rust! This car is SOLID!!! I bought this car as an everyday driver, I was thinking about truly how bad ass I would look in it rather then how economical it was for my daily route. I love this car and I would hate to get rid of it but it needs to go to someone who has more time for her! Also with the car I just purchased a new HID kit with new housings which may be installed before the car is purchased depending on how long it sits. If there are any questions please do not hesitate to ask! Thanks for looking!!
Chevrolet Camaro for Sale
2010 chevrolet camaro 1ls
1969 camaro ss 4 speed v8 roller shell 69 starter project 350 clean(US $3,800.00)
"burnished brown", rare factory color x77 z28, rotisserie resto, museum quality
1968 camaro rs/z28 replica w/ 1969 302 dz engine
2000 chevrolet camaro true ss coupe 2-door 5.7l slp(US $11,200.00)
69 / 1969 camaro coupe......solid project
Auto Services in South Carolina
Yellow Cab ★★★★★
Viking Imports Foreign Car Parts & Accessories Inc ★★★★★
Troy Gardner`s Paint & Body ★★★★★
Sterling`s Detail ★★★★★
Spiveys Wrecker Service ★★★★★
Randy`s Garage & Alignment ★★★★★
Auto blog
Chevy bringing Spark RS Concept to SEMA
Thu, Oct 22 2015Well, the SEMA mess has well and truly begun. Every year, an increasing number of automakers flock to the Las Vegas auto show, bringing accessories and concept vehicles that are both awesome as well as occasionally questionable. Chevy will bring an RS concept of the new Spark to SEMA, signaling that its styling package will be applied to the brand's smallest vehicle in the near future. We can expect the usual stuff in a production Spark RS – larger wheels, a slightly sportier cabin, a more aggressive body kit, and a small drop in ride height – but for the concept, Chevy wasn't restrained by things like budget. The front splitter, and sill extensions, foglight surrounds, and rear bumper insert are all finished in carbon fiber. The 17-inch alloys are apparently inspired by the Corvette Z06's Z07 package, while the Dark Liquid Switchblade Silver paint is broken up only by a driver's-side stripe. The company is also using SEMA to show its new Red Line accessories, features both concept and production parts for the Trax, Camaro, Malibu, Colorado, and Sierra. Every vehicle gets Enhanced Silver Metallic paint, a charcoal finish on the roof, satin graphite/red graphics, black/red badge kits, and aside from the Colorado, tinted lamps. Individual mods for the Trax include relatively simple tweaks, including new 18-inch wheels, blacked-out bowtie badges, a lowered ride height, and custom badging. It's a similar story on the Malibu, except that its 19-inch wheels are a smidge larger, and its lowered ride height is the result of a concept kit. The first concept based on the new Camaro opts for 20-inch wheels, while adding a few more performance items. The ride height has been lowered, there's a new air intake system, and an upgraded brake package. Chevy has also replaced the front upper and lower grilles inserts with red accents. On the pickup side of the coin, the Colorado gets 18-inch wheels, new intake and exhaust systems, Goodyear Wrangler Fortitude tires, and flared wheelarches. The Silverado gets similar intake and exhaust upgrades, as well as the largest wheels of them all, with 22s at all four corners. The full-size truck also gets a Brembo brake package, while every vehicle, aside from the Camaro, gets Thule roof-mounted accessories. You can check out all six concepts in the gallery above, and then be sure to keep an eye open for live images from the floor of the 2015 SEMA show, slated to open next month.
GM sees 'strong year' in 2018, then gold in Chevy Silverado for 2019
Tue, Jan 16 2018DETROIT — General Motors said on Tuesday it expects earnings in 2018 to be largely flat compared with 2017, but that profits should pick up pace in 2019 as its revamped line of high-margin pickup trucks hits the U.S. market. The 2018 earnings outlook was above market expectations, sending GM shares up more than 3 percent in premarket trading. "GM had a very good 2017 as we continued to transform our company to be more focused, resilient and profitable," GM Chief Executive Mary Barra said in a statement. "We are positioned for another strong year in 2018 and an even better one in 2019." GM and its Detroit rivals, Ford and Fiat Chrysler Automobiles, are bringing on new trucks at a time when overall U.S. new vehicle sales have been falling, but truck sales continue to grow as consumers abandon passenger cars in favor of pickups, SUVs and crossovers. GM on Saturday fired a new round in the battle for profits from one of the U.S. auto industry's most lucrative segments when it showed a new generation of its Chevrolet Silverado pickup truck at the Detroit auto show. The new Silverado, a highlight of the event, is the successor to GM's best-selling vehicle in North America. Sales of the current Silverado rose nearly 2 percent to 585,000 vehicles in 2017. In the coming months, the company will also reveal a revamped GMC Sierra pickup truck. U.S. new vehicle sales fell 2 percent in 2017 after hitting a record high in 2016, and are expected to drop further in 2018 as interest rates rise and more late-model used cars return to dealer lots to compete with new ones. GM said on Tuesday that while it retools a factory in Ft. Wayne, Indiana, to make the new pickup trucks, it will shift some production to an Oshawa, Ontario, plant in order to avoid missing sales in a hot market for the vehicles. The No. 1 U.S. automaker said it will record a $7 billion non-cash charge for its fourth-quarter 2017 earnings related to deferred tax assets. GM said it expects capital expenditure in 2018 of around $8.5 billion, about $1 billion of which will go toward funding self-driving car technology. Last week, the company said it is seeking U.S. government approval for a fully autonomous car — one without a steering wheel, brake pedal or accelerator pedal — to enter the automaker's first commercial ride-sharing fleet in 2019. GM said it expects 2017 earnings per share at the high end of its previously forecast range of $6 to $6.50.
1956 Corvette SR-2 factory racer profiled
Mon, Jan 19 2015The Chevrolet Corvette has earned its place as America's sports car, capable of taking on the best the world can throw at it. Much of that winning reputation was earned with victories on the track. Now, there was a chance to own an early piece of the nameplate's motorsport history in the form of a 1956 Corvette SR-2 racer, but some deep pockets were necessary to get it, with an estimate of $6.885 million. The story behind the SR-2 is fascinating. In 1956, famous General Motors designer Harley Earl's son was racing in a Ferrari. Obviously, that wasn't going to work given his father's position within the automaker, and Harley and Corvette engineer Zora Arkus-Duntov got to work on a faster racecar. Three were made. This one was reportedly the first, and for 1957 it also received a fuel-injected V8 making a claimed 331 horsepower and four-speed manual gearbox, according to "Corvette Mike," the owner and seller. The SR-2 went on display in Scottsdale, AZ appropriately timed to coincide with the big Barrett-Jackson auction there that wrapped up this weekend. The car wasn't part of that event; instead marque specialist Mike Vietro sold the racer as a private treaty sale. Company spokesperson Troy Worrell told Autoblog both the bids and identities of the bidders will remain undisclosed. The video above goes into even deeper detail about this rare, finned Vette or check out the car's full description for even more info.









