1972 Chevrolet Z28 Real Deal Numbers Matching on 2040-cars

Auto blog

2024 Chevrolet Silverado EV output jumps to 754 hp and 785 lb-ft

A couple of days ago, GMC unleashed its 2024 Sierra EV Denali Edition 1 pickup, the luxury truck division's version of the 2024 Chevrolet Silverado EV. As has been the case between Chevy and GMC for decades, GMC designers worked to put ample visual difference between the two pickups that share the similar underpinnings. Unlike what's been the historical case, GMC announced output figures for the Sierra EV well above those for the Silverado. Preliminary estimates for the battery-electric Sierra with the dual-motor powertrain are 754 horsepower and 785 pound-feet of torque. Chevy revealed the 2024 Silverado EV in January with 664 hp and 785 lb-ft in RST trim. We're not sure what happened after the GMC debut, but the Bowtie has updated the Silverado's output to match the GMC with 754 hp and 785 lb-ft. Chevy truck communications spokesperson Sean Szymkowski submitted a statement to various outlets explaining, "As we prepare for production of the Silverado EV, our engineering team has further refined the estimated performance specs for the 2024 Chevrolet Silverado EV RST First Edition. GM now estimates horsepower to be up to 754 and torque up to an estimated 785 lb-ft when Wide Open Watts mode is engaged." It's possible Chevrolet did so in order to forestall backlash about the disparity, or it's possible the automaker already planned to do so after the GMC dropped. On the ICE side, buyers have got used to powertrain parity, the Silverado and Sierra offering the same engines with the same outputs even with pricing about $3,600 apart on the respective top trims. No matter how the decision was made, the benefits redound to Silverado EV buyers. By the way, the "Wide Open Watts" reference refers to the driving mode required to extract these peak power figures. In the GMC Sierra EV, this is called Max Power Mode. We're still looking for clarity on the output figures in everyday driving modes, we believe those will be the same 510 hp and 615 lb-ft that's the maximum in the lower trim Silverado EV Work Truck.    With a year to wait before the Silverado RST EV reaches reservation holders, and with the Chevrolet Work Truck providing real-world feedback before the RST arrives, don't be surprised at more tweaks made to both the Silverado and Sierra EVs before they hit the market. Related video: GMC reveals the all-electric 2024 Sierra EV

This is your 2014 Chevrolet SS

Think you've waited long enough for this? If so, then you'll want to savor the high-res photos we've so far been given of the 2014 Chevrolet SS, the first rear-wheel-drive performance sedan from The Bowtie in 17 years.
We all know its our version of the brand new VF-model Holden Commodore, but what's under the hood that earns the appellation "performance?" A 6.2-liter LS3 V8 engine producing 415 horsepower and 415 pound-feet of torque. That's 35 hp and lb-ft less than the same engine is expected to produce in the 2014 Chevrolet Corvette. Chevrolet says the sedan will get from 0-to-60 miles per hour "in about five seconds."
Shifting comes courtesy of a six-speed automatic with paddles on the steering wheel, while stopping arrive via four-piston Brembo calipers up front, a single sliding piston in back. The forged aluminum wheels are 19-inchers all around, each set supporting right around 50 percent of the sedan's weight, and the aluminum hood and trunk are meant to keep the center of gravity low.

Chevy Tahoe-to-K5 Blazer conversion shop renders Jimmy option

Back in 2019 we told you about a truck that looked like a K5 Chevy Blazer, but was actually a modern late-model Tahoe underneath. It was the product of Arkansas shop Flat Out Autos, which reskinned modern GM full-size SUVs to look like their predecessors. Now, the same shop is planning to release a GMC version, converting Yukons to Jimmys. We were impressed by Flat Out's workmanship, beautifully blending the lines of the Blazer into those of the Tahoe. The result was a cohesive design, not just a panel swap. It clearly required a lot of work, which helped justify the $69,000 price tag, not including the cost of the donor Tahoe. FlatOut Autos GMC Blazer Tahoe reskin 01 View 11 Photos At least one new owner was so impressed that they recently purchased four identical Blazer conversions at once. The quadruplets were all finished in blue with a white roof and all based on brand-new 2020 Tahoes. Obviously, with such demand it was only natural for Flat Out to explore other options. On Facebook the company said it was working on a 1972 version with an eggcrate grille. Now, they've also released a rendering paying homage to the K5 GMC Jimmy. The Jimmy conversion uses the original's quad-headlight face, crosshair grille and GMC badging. Like the Blazer conversion, it adds chrome bumpers and milled door handles while adapting the original's 2-door design to the new truck's 4-door body. The rendering only shows the front three-quarter view, but presumably a new carbon fiber rear door would have to be created as the Blazer's says "Chevrolet" across the back. Flat Out says that all the modern conveniences found on the donor Tahoe will work on the conversion, including parking, blind spot and lane keeping sensors. If you have the coin, it's a great way to have retro style without giving up modern safety and performance. The new Blazer has been disappointing to many fans that had hoped for a Bronco-like SUV. Instead, GM gave us a crossover. The Flat Out conversions might be a good compromise, and expanding it to the GMC brand only makes sense. Obviously there's no requirement to use a GMC Yukon as the donor vehicle for the Jimmy, as it's functionally identical to a Tahoe, but wouldn't you want to keep it in the family? Related Video: