1969 Rs/ss Camaro on 2040-cars

Auto blog

Poor headlights cause 40 cars to miss IIHS Top Safety Pick rating

Over the past few months, we've noticed a number of cars and SUVs that have come incredibly close to earning one of the IIHS's highest accolades, the Top Safety Pick rating. They have great crash test scores and solid automatic emergency braking and forward collision warning systems. What trips them up is headlights. That got us wondering, how many vehicles are there that are coming up short because they don't have headlights that meet the organization's criteria for an "Acceptable" or "Good" rating. This is a revision made after 2017, a year in which headlights weren't factored in for this specific award. This is also why why some vehicles, such as the Ford F-150, might have had the award last year, but have lost it for this year. We reached out to someone at IIHS to find out. He responded with the following car models. Depending on how you count, a whopping 40 models crash well enough to receive the rating, but don't get it because their headlights are either "Poor" or "Marginal." We say depending on how you count because the IIHS actual counts truck body styles differently, and the Infiniti Q70 is a special case. Apparently the version of the Q70 that has good headlights doesn't have adequate forward collision prevention technology. And the one that has good forward collision tech doesn't have good enough headlights. We've provided the entire list of vehicles below in alphabetical order. Interestingly, it seems the Volkswagen Group is having the most difficulty providing good headlights with its otherwise safe cars. It had the most models on the list at 9 split between Audi and Volkswagen. GM is next in line with 7 models. It is worth noting again that though these vehicles have subpar headlights and don't quite earn Top Safety Pick awards, that doesn't mean they're unsafe. They all score well enough in crash testing and forward collision prevention that they would get the coveted award if the lights were better.

Camo'd Chevy Camaro ZL1 is one bad boy

Thanks to a fresh gallery of spy shots, we're getting a much better look at the next Chevrolet Camaro ZL1 during its development, and this machine is looking seriously mean. Unlike the last photos, the heavy cladding is gone from the body this time and is replaced by a camouflage wrap. That switch makes checking out the details a whole lot easier. The first thing you'll notice at the front is the massive grille that looks ready to devour anything that gets in the way. To add a little more menace, the lower air dam appears to jut out a bit more, as well. While harder to see in these latest shots, our spies say the hood still boasts an extractor similar to what's found on the Cadillac CTS-V. The big, double spoke wheels look great in black and really dominate the styling in profile. Look past them, and you notice some tweaked side sills, as well. At the very back, you can also spot some styling adjustments to the rear bumper. There's an unmissable wing back there, too. The powerplant for the ZL1 is still a mystery, but it's rumored to use the LT4 6.2-liter supercharged V8. The similar hood design as the CTS-V is one piece of evidence to support that. Even with the same engine, Chevy's engineers could tweak the output higher or lower than the Caddy. The wait to find out isn't too long because the ZL1 is anticipated to launch for the 2017 model year. Related Video:

Is the skill of rev matching being lost to computers?

If the ability to drive a vehicle equipped with a manual gearbox is becoming a lost art, then the skill of being able to match revs on downshifts is the stuff they would teach at the automotive equivalent of the Shaolin Temple. The usefulness of rev matching in street driving is limited most of the time – aside from sounding cool and impressing your friends. But out on a race track or the occasional fast, windy road, its benefits are abundantly clear. While in motion, the engine speed and wheel speed of a vehicle with a manual transmission are kept in sync when the clutch is engaged (i.e. when the clutch pedal is not being pressed down). However, when changing gear, that mechanical link is severed briefly, and the synchronization between the motor and wheels is broken. When upshifting during acceleration, this isn't much of an issue, as there's typically not a huge disparity between engine speed and wheel speed as a car accelerates. Rev-matching downshifts is the stuff they would teach at the automotive equivalent of the Shaolin Temple. But when slowing down and downshifting – as you might do when approaching a corner at a high rate of speed – that gap of time caused by the disengagement of the clutch from the engine causes the revs to drop. Without bringing up the revs somehow to help the engine speed match the wheel speed in the gear you're about to use, you'll typically get a sudden jolt when re-engaging the clutch as physics brings everything back into sync. That jolt can be a big problem when you're moving along swiftly, causing instability or even a loss of traction, particularly in rear-wheel-drive cars. So the point of rev matching is to blip the throttle simultaneously as you downshift gears in order to bring the engine speed to a closer match with the wheel speed before you re-engage the clutch in that lower gear, in turn providing a much smoother downshift. When braking is thrown in, you get heel-toe downshifting, which involves some dexterity to use all three pedals at the same time with just two feet – clutch in, slow the car while revving, clutch out. However, even if you're aware of heel-toe technique and the basic elements of how to perform a rev match, perfecting it to the point of making it useful can be difficult.