1968 Chevrolet Camaro on 2040-cars

Auto blog

Want a V8 on the cheap? Buy a work truck

In case you didn't notice, V8 cars have gotten pretty expensive. If you want a modern muscle car like the Dodge Challenger R/T, Ford Mustang GT, or Chevy Camaro SS, you'll need between $34,000 and $38,000 for a stripped out example of one. The cheapest of those is the Challenger, and the priciest is the Camaro. These are also the cheapest V8 cars the companies offer. But if you absolutely have to have a V8 for less, there is an option, work trucks. As it turns out, all of the Big Three offer their most basic work trucks with V8s. And because they're so basic, they're pretty affordable, especially when sticking with the standard two-wheel drive. A Ram 1500 Tradesman with a V8 can be had for as little as $29,840, which is a little more than $4,000 less than a Challenger R/T. For a bit more at $30,275, you can have a Chevy Silverado W/T, almost $8,000 less than a Camaro SS. The most expensive is the V8 Ford F-150 starts at a starting price of $30,670, which is a bit over $5,000 less than the Mustang. Of course you'll be in an ultra bare bones vehicle with few comforts, and the price will go up if you add stuff, but we're bargain hunting here, and sacrifices are sometimes necessary. Besides, what you lose in comfort, you gain in loads of cargo space and towing (try to look at the bright side). Also, as a side note, all three trucks are available with optional electronic locking rear differentials. At the discounted price of these trucks, you still get a heaping helping of power. The most potent of the trio is the Ram 1500 Tradesman with 395 horsepower and 410 pound-feet of torque generated by a 5.7-liter V8. Compared with the Challenger R/T, the Ram is up by 20 horsepower and they're tied for torque. The value proposition is even more stark between the two vehicles when looking at the price per horsepower. Each pony in the Ram costs $75.54, while the Challenger charges you $90.91. The Challenger is also more expensive per horsepower than its close competitors. The F-150's 5.0-liter V8 is just barely behind the Ram with 395 horsepower and 400 pound-feet of torque. That's still more power than the Challenger, and it matches the torque of the 2017 Mustang GT. On the down side, it still would be down 20 horsepower on that same 2017 Mustang, and it's behind by 60 horsepower and 20 pound-feet on the new 2018 Mustang GT. The F-150 also just edges out the Mustang in the dollar per horsepower measure.

Experimental mid-engine XP-819 Corvette going up for auction

It seems to be commonplace that when a new Corvette is in development, rumors swirl about a possible mid-engine layout. As is the case of Chevy's most recent C7 Corvette, these rumors never pan out.
In any case, the idea for a 'Vette with an engine mounted behind the driver can probably all be traced back to a single car, the 1964 XP-819 prototype. Built as an "engineering exercise" back in 1964, the prototype was designed with a rear-mounted engine. History tells us that the idea of a rear-engine Corvette fizzled, and the XP-819 was eventually cut up into pieces and stored at a shop in Daytona Beach, FL.
After sitting for untold years, a restoration project started on the car, and while it isn't yet fully completed, the current owner of the car, Mid America Motorworks, will have the car on display at the 2013 Amelia Island Concours d'Elegance as a "driveable chassis" with hopes of having a fully completed car ready to bring to next year's show.

2015 Chevy Colorado gets its GearOn before Chicago

Complementing the Chevrolet Silverado Midnight Edition at the 2015 Chicago Auto Show is this, the 2015 Colorado GearOn Edition, which as the name might suggest, takes full advantage of the company's truck accessory catalog. Available on the volume LT trim and in both crew and extended cab varieties and with both the short and long-bed options, the GearOn Edition adds plenty of nifty extras designed to increase the truck's versatility and help accommodate bikes, kayaks and other outdoorsy items. The GearOn bars package, divider package and tie-down rings are supplemented an "EZ" lift and lower tailgate, side steps, gloss black 18-inch wheels, a body color grille, and blacked-out Chevy badges. And although it's not specifically called out in the attached press release, the paint on this special edition looks different than anything else in the truck's catalog. We dig it, especially with the black accents. Prices, meanwhile, start at $31,250, which is not even $1,200 more than a Colorado Extended Cab LT 4x4. We'll have more on the Colorado GearOn when it makes its debut later this week at the 2015 Chicago Auto Show, including live images to add to the pair of stocks distributed by Chevy. Until then, scroll down for the press release on the limited-edition truck. Chevy Colorado GearOn™ Edition Brings More Adventure Versatile accessories package maximizes cargo capability; enables more fun DETROIT – Chevrolet today introduced the 2015 Colorado GearOn™ Special Edition, which blends the capability of the all-new midsize pickup truck with the versatility of the GearOn accessory system – and additional popular features. It makes its public debut Feb. 13-22 at the Chicago Auto Show. The Colorado GearOn Special Edition goes on sale this spring with a starting price of $31,250. It's offered on LT models in extended or crew cab configurations, with the long or short cargo bed and available 4WD. "Chevrolet Colorado answers the call for customers who have passions of all types and the GearOn accessory system enables them to bring more adventure wherever they go," said Tony Johnson, Colorado marketing manager. "And with Colorado offering segment-leading efficiency and capabilities, it's a combination that maximizes adventure without compromise." The GearOn accessory system is designed for easy configuration with a multitude of mounting accessories for everything from bikes, kayaks, skis and stand-up paddle boards to a bed-mounted tent.