1968 Chevrolet Camaro on 2040-cars

Auto blog

2021 Chevy Colorado and GMC Canyon facelift spied

The Chevy Colorado and its GMC Canyon twin have been on sale for a good long time now, and while things move a little more slowly on the truck side when it comes to facelifts and model changeovers, it seems like it’s about time. So itÂ’s no surprise to see some lightly camouflaged trucks running around ahead of what appears to be a minor refresh for the 2021 model year. Starting with the Colorado, it appears to have a bowtie hiding behind some camo in the center of the grille, which otherwise looks like the no-bowtie option you can get on 2019-and-up trucks. It could be that Chevy is keeping the no-bowtie grille design but allowing a bowtie to grace it, or it could be misdirection. Either way, the grille pattern adds a bit of flair to the otherwise staid front end design. There also appears to be a bit more shape to the lower air inlet, with echoes of some of the lower fascias of its bigger Silverado stablemate. The Canyon, on the other hand, shows more extensive front-end changes. At first glance, it looks to emulate some variants of the GMC Sierra, which would make sense given those modelsÂ’ changes for the 2020 model year. In particular, this Canyon has hints of Sierra HD, being more square and monolithic than the regular Sierra 1500s, although itÂ’s a little hard to tell with the camo covering the edges of the grille. It could certainly also adopt more rounded corners like the 1500s. Either way, itÂ’s more vertical and thereÂ’s less differentiation between the upper grille and lower opening. ThereÂ’s nothing in the way of changes around the sides or back, and while there may be some minor changes inside, we arenÂ’t expecting any. The word around town is that this isnÂ’t a full facelift, but rather a minor front end tweak thatÂ’ll just be a regular part of the model-year changeover. 

2015 Chevrolet Corvette Z06

"Corvette" has stood for American muscle, American sports car, and American supercar. In many cases, it still stands for America: liberty on the go, LS-powered freedom. There was also a time when it meant really impressive numbers that didn't equate to really impressive handling, and a not-so-nice cabin. The handling issue really turned the road-legal corner when the C5 Z06 was introduced in 2001, and by the time the super-duper ZR1 ended its run in 2010, Corvette had exorcised practically all of its dynamic demons. But when I took a seat in the 2015 Corvette Z06 on the first day of my week-long loan, I espied a few demons still squatting in the interior. When colleague Seyth Miersma drove the Z06, he wrote, "Listen, I'm not going to be the guy that dogs the Corvette for having a cheap-feeling interior, this generation has put those once-legitimate claims to rest." Well, I am going to be that guy, because I don't think those claims have been put to rest. One day Chevy will give us leather that looks and feels like leather, instead of the astonishingly thin hide that is laid directly on top of the instrument panel structure. This material was set off by white stitching, but there were no seams, just a trail of white stitches. In some places it was hard to tell where the leather ended and the plastic began; or it might all have been the same upholstery, I don't know. Five dollars of foam padding would add five thousand dollars of luxury to the cockpit. One day Corvette will have plastics that don't look so plasticky. I know General Motors can do it. And after years of thinking Corvette seats were too wide and flat, this latest Z06 is almost there. The seatbacks were nice, but the exaggerated side bolstering on the seat bottoms was too narrow and sharp. That's a personal preference, though; other drivers with thinner thighs will think differently. My complaint isn't that the interior isn't luxurious, it's that it's not luxurious enough. If Chevrolet was worried about pricing, it could add some kind of profligate package to the options list. Have some ex-Porsche people design it, call it the Teutonic Splendor Package, slap a massive price on it, and count the money. People will buy it, and no one will ever have to say again, "But the interior..." That said, this test car's cabin had every feature I wanted. The gauge cluster was bright, crisp, and readable in every shade of daylight.

How GM engineers are using diaper 'snow' to keep you warm

Testing how snow affects General Motors' vehicles isn't really a problem right now for the company's engineers, but in the dog days of summer the process isn't exactly easy. The only real option is for them to book time at the automaker's climatic wind tunnel. However, a flash of brilliance from an engineer allows snow to be simulated regardless of the temperature outside, and the discovery is all because of his daughter's wet diaper. The realization came to GM Thermal Systems engineer Nicholas Jahn while he was swimming with his daughter and noticed how her diaper ballooned in size in the water. He found out the substance that makes this possible is called sodium polyacrylate. When the material gets wet it grows and forms fluffy flakes that are a close imitation of snow. Best of all, the stuff can be prepared easily any time of the year, and it's reusable. The engineering team uses the material to test the effectiveness of the heating systems of GM's vehicles. They spread the sodium polyacrylate over the inlets at the base of the windshield to obstruct the airflow and then crank the heater. After some time, they can see how much is being sucked into the system and design more efficient systems in the future. See how the process works in the video above and read about the diaper discovery in GM's press release below. Diapers Change Chevy Cruze Winter Warm-up Time GM validation engineer uses diaper material "snow" to reduce frigid drives 2015-01-06 DETROIT – An item commonly found on an infant's changing table is helping General Motors' engineers simulate snow year round, ensuring heating systems in cars like the 2015 Chevrolet Cruze can quickly and efficiently warm its interior. Packed snow can prevent air from entering the inlet panel at the bottom of the windshield, obstructing the flow of air into the heating system and reducing the amount of air it can push out. This can lead to less efficient warming of the car's interior and windshield defrosting. "The last thing anyone wants to do when it's freezing cold out is scrape their windshield," said Nicholas Jahn, GM Vehicle Thermal Systems engineer. "The testing we perform on the Chevrolet Cruze with the diaper material allows us to maximize the car's heating capabilities." Ironically, Jahn stumbled upon his diaper-based testing method in the middle of summer. During a swim with his daughter, he noticed her diaper multiplied in size when it came into contact with water.