Find or Sell Used Cars, Trucks, and SUVs in USA

1967 Real Rs/ss 325hp 396 on 2040-cars

Year:1967 Mileage:67000 Color: Bolero REd /
 Black
Location:

Livermore, California, United States

Livermore, California, United States
Advertising:
Engine:396
Transmission:4-speed
Body Type:Coupe
Vehicle Title:Clear
VIN: 124377l125216 Year: 1967
Sub Model: RS/SS
Make: Chevrolet
Exterior Color: Bolero REd
Model: Camaro
Interior Color: Black
Trim: Black Stripe
Number of Cylinders: 8
Drive Type: 2-wheel
Mileage: 67,000
Condition: UsedA vehicle is considered used if it has been registered and issued a title. Used vehicles have had at least one previous owner. The condition of the exterior, interior and engine can vary depending on the vehicle's history. See the seller's listing for full details and description of any imperfections.Seller Notes:"This is a project car.It comes with a correct code 1967 325hp 396.Motor has had all machine work done with new pistons,bearings,gaskets,turned crankshaft,and other things.Heads are redone.Motor will need to be assembled or I can have it done for about 300 dollars.Enclosed are pics of the trim plate and the serial numbers have been verified by local police.Its comes with a Muncie M-21 and an original Camaro multi leaf 12 bolt posi.It has the correct tach,console with gauges,Fold down rear seat,rear mounted attenna and custom RS bucket seats.Only major rust is around right rear back window.Has the hideaway headlights,and as the pics show was painted black on the tail panel.It comes with a pink slip and is currently on a non-op.Its also a black plate car,and I have both plates.Power booster and master cylinder have also been redone.I have already repainted dash and firewall and car is complete except for hood and grill.Some cut piece out in floor above rear end.I have replacement piece.i"

Rare RS/SS 396     I also have a set of Camaro ralley wheels that go with Car.I was told that the rear piece was cut out due to a Quick Change rearend.It is very east to replace.I will show it in pics.Car is also for sale locally and could be sold at anytime.These cars are rare and hard to find.Easy 40.000 restored so I wouldn't sleep on it.Good luck with your bidding.


On Jul-08-13 at 22:05:33 PDT, seller added the following information:

I am selling this for a friend.Please refer all e-mails to coopstar01@gmail .com or leave phone message at 408-529-9711.Thank you

Auto Services in California

Young`s Automotive ★★★★★

Auto Repair & Service
Address: 3509 Grand Ave, Diablo
Phone: (510) 444-4185

Yas` Automotive ★★★★★

Auto Repair & Service, Brake Repair
Address: 1610 Allston Way, Albany
Phone: (866) 595-6470

Wise Tire & Brake Co. Inc. ★★★★★

Auto Repair & Service, Tire Dealers, Brake Repair
Address: 949 S La Brea Ave, Torrance
Phone: (310) 904-6163

Wilson Motorsports ★★★★★

Auto Repair & Service
Address: 2138 Otoole ave, San-Jose
Phone: (408) 267-7937

White Automotive ★★★★★

Automobile Parts & Supplies, Auto Body Parts
Address: 250 E Whittier Blvd, Los-Nietos
Phone: (562) 697-2612

Wheeler`s Auto Service ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Automobile Air Conditioning Equipment
Address: 327 W 17th St, Santa-Ana
Phone: (714) 543-4689

Auto blog

First 2014 Chevy Corvette Stingray spotted crashed in the wild

Tue, 12 Feb 2013

This restyled blue 2014 Chevrolet Corvette Stingray is wearing manufacturer plates, and it appears to be the same one seen around the internet in various pictures lately. This crash is likely not part of the Chevrolet testing regimen, however. Digital Corvettes forum member gpetry posted the shot with a note: "got this picture e-mailed from a friend in Arizona last week..." No circumstances are given, other than the incident occurred in the thick of a set of curvy roads, and the coupe ping-ponged off a guardrail and into the rock wall. Hopefully everyone involved in the incident walked away.
It may not be a pretty thing to see, a crashed sports car that's not even available for sale yet, but rest easy. Many pre-production cars are used for development and then unceremoniously crushed and scrapped, anyway. If that's the case here, that makes this wrecked 'Vette less of a tragedy and more of a case of exceptional efficiency.

Chevy might've pulled out of NASCAR if it weren't for new Gen 6 car

Wed, 20 Feb 2013

We've been on the fence with NASCAR for some time now. On one hand, it's some of the closest racing anywhere in motorsports, with actual passing and door-handle-to-door-handle action as a matter of course. But on the other, it's become template racing - a personality-driven sport more about the drivers than any sort of loyalty to a particular automaker. The Car Of Tomorrow format really rammed that message home, with a racecar's identity coming down to little more than headlamp stickers slapped on the nose. That's not necessarily a bad thing in and of itself, but we've wondered for some time what's in it for the automakers, who pay big money to stay in a series that has had little increasingly little do with street car sales, let alone innovation.
Apparently General Motors was beginning to wonder the same thing. In a new ESPN report, Rick Hendrick, team owner of Hendrick Motorsports, suggests that GM would have seriously considered leaving NASCAR if it wasn't for the move away from the COT to the new Gen 6 racer. According to Hendrick, GM North America boss Mark Reuss spearheaded the charge away from the 2007 COT and toward a racecar with clearer automaker ties - cars like the new Chevrolet SS racer shown above. Learn more about the fight for a closer-to-production look in the ESPN story at the link.
Now, if we could just get more rear-wheel drive V8 coupes into showrooms....

Weekly Recap: GM plans massive new paint shop at Chevy Corvette factory

Sat, May 23 2015

General Motors is laying out some serious green to maintain the Chevy Corvette's expansive color palette. The automaker is breaking ground on a new paint shop this summer that's part of a $439-million investment to upgrade the 34-year-old Bowling Green, KY, factory that builds the Stingray. The massive new structure will total 450,000 square feet, nearly half the size of the current 1-million square-foot facility. Construction is expected to take two years and won't impact Corvette production. The upgrades include new robots that save paint and create a better finish, longer, more efficient ovens to bake in the finish, and LED lighting. There's also a dry scrubbing booth technology with a limestone handling system that eliminates waste. GM has invested $135 million in the factory in last four years for the changeover to build the C7 and to relocate its Performance Build Center to Bowling Green. The improvements continue to modernize the Kentucky factory, which has become a tourist attraction in its own right, as more than 56,000 enthusiasts visited it last year. The upgrades are part of a $5.4-billion investment GM confirmed in April that will remake its US footprint in the next three years. The Bowling Green expansion underscores GM's continued commitment to the Corvette, which sold nearly 38,000 copies around the world last year, an eight-year high. "With this major technology investment, we can continue to exceed the expectations of sports car buyers for years to come," North American manufacturing manager Arvin Jones said in a statement. OTHER NEWS & NOTES Takata recall hits 34 million vehicles The National Highway Traffic Safety Administration expanded the Takata airbag recall to an almost unthinkable 34 million vehicles on Tuesday. The recall is part of an agreement reached by the two sides where Takata admitted some of its airbag inflators have a defect, and the deal compels the company to comply with all future regulatory actions and investigations. Takata's airbag inflators were produced with "a propellant that can degrade over time" and lead to ruptures, NHTSA said. Six deaths have been attributed to the flaw worldwide. Investigations conducted by Takata, automakers, and others have not determined the exact cause of the inflator problem, but NHTSA said moisture appears to alter the propellant's chemical structure. It then ignites too rapidly, creates too much pressure that ruptures the inflator, and blasts shards of metal at passengers.