1989 Chevrolet Ck Pickup 3500 on 2040-cars
Sierra Vista, Arizona, United States
Chevrolet C/K Pickup 3500. 1989 Chevy crew cab dully -454- Turbo 400 Trans-All new weather strips inside and out
-New Dash- All new trim kit in the interior- Fuel Injection-Frame off restoration- New Shocks- New Upper and lower
a Arms- New Ball Joints -New Drive line- New U Joints- New Brakes-New Axle Seals -Resiliently complete services oil
and Diffs Etc- Tubbed Bed - Narrowed Rear end -Custom dual exhaust (flow mater and cats) 20” custom cut semi
wheels-All new drive train including shafts-air bags load level Bags- All new plumbing on motor- New Bed liner top
and bottom- Full custom checked interior -Original paint- New Battery- New injectors New front and rear bumpers
-New Grill -New marker lights -New taillights- New Headlight -Really cool and well built custom truck and is at
home at the car shows, highway, or hauling work tools as a daily
Chevrolet C/K Pickup 3500 for Sale
1976 chevrolet c30k30 silverado(US $15,750.00)
Chevy(US $300,000.00)
1959 chevrolet apache 3100(US $19,680.00)
1959 chevrolet apache 3100(US $17,220.00)
Clean (US $5,000.00)
Clear title(US $16,500.00)
Auto Services in Arizona
yourcarguyaz.com ★★★★★
VW & Audi Independent Service and Repair Specialist ★★★★★
USA Auto Glass Repair ★★★★★
Truck And Trailer Parts Incorporated ★★★★★
Tony`s Auto Repair ★★★★★
TintAZ.com Mobile Window Tinting ★★★★★
Auto blog
GM’s move to Woodward is the right one — for the company and for Detroit
Wed, May 1 2024Back in 2018, Chevy invited me to attend the Detroit Auto Show on the company dime to get an early preview of the then-newly redesigned Silverado. The trip involved a stay at the Renaissance Center — just a quick People Mover ride from the show. IÂ’d been visiting Detroit in January for nearly a decade, and not once had I set foot inside General MotorsÂ’ glass-sided headquarters. I was intrigued, to say the least. Thinking back on my time in the buildings that GM will leave behind when it departs for the new Hudson's site on Woodward Avenue, two things struck me. For one, its hotel rooms are cold in January. Sure, itÂ’s glass towers designed in the 1960s and '70s; I calibrated my expectations accordingly. But when I could only barely see out of the place for all the ice forming on the inside of the glass, it drove home just how flawed this iconic structure is. My second and more pertinent observation was that the RenCen doesnÂ’t really feel like itÂ’s in a city at all, much less one as populous as Detroit. The complex is effectively severed from its surroundings by swirling ribbons of both river and asphalt. To the west sits the Windsor tunnel entrance; to the east, parking lots for nearly as far as the eye can see. To its north is the massive Jefferson Avenue and to its south, the Detroit River. You get the sense that if Henry Ford II and his team of investors had gotten their way, the whole thing would have been built offshore with the swirling channel doubling as a moat. This isnÂ’t a building the draws the city in; itÂ’s one designed to keep it out. Frost on the inside of the RenCen hotel glass. Contrasted with the new Hudson's project GM intends to move into, a mixed-use anchor with residential, office, retail and entertainment offerings smack-dab in Detroit's most vibrant district, the RenCen is a symbol of an era when each office in DetroitÂ’s downtown was an island in a rising sea of dilapidation. Back then, those who fortified against the rapid erosion of DetroitÂ’s urban bedrock stood the best chance of surviving. This was the era that brought us ugly skyways and eventually the People Mover — anything to help suburban commuters keep their metaphorical feet dry. The RenCen offered — and still offers — virtually any necessity and plenty of nice-to-haves, all accessible without ever venturing outside, especially in the winter, but those enticements are geared to those who trek in from suburbia to toil in its hallways.
Porsche and Buick earn top honors in J.D. Power Sales Satisfaction Index Study
Wed, Nov 8 2023Customer satisfaction with car buying has been at a low point over the past few years, as price increases, inventory shortages, and COVID restrictions have complicated every part of the process. There are signs of improvement, however, as J.D. Power’s 2023 U.S. Sales Satisfaction Index Study showed that customer satisfaction has improved slightly from a year ago. J.D. Power rates satisfaction on a 1,000-point scale, finding that it improved seven points to 793 from last year. Improving inventory levels and a slow leveling off of prices have contributed to that improvement, and fewer people are paying above MSRP for new cars. Some auto brands performed better than others with sales satisfaction. Porsche ranked highest among premium brands, followed by Alfa Romeo. Buick took the top spot among mass-market brands, with GMC, Chevrolet, and Mitsubishi behind. J.D. Power also handed out segment-level awards: Premium Cars: Porsche Premium SUV: Porsche Mass-Market Car: Chevrolet Mass-Market SUV/Minivan: GMC Mass-Market Truck: GMC Despite the increase in sales satisfaction, thereÂ’s still room for improvement to reach pre-pandemic levels. J.D. Power noted gaps in salesperson knowledge as an area of improvement. Buyers rated salespeople much better during a gas vehicle purchase than with EVs, citing their expertise as a challenge. Pricing remains a challenge despite an improvement since 2022, and satisfaction is still below pre-pandemic levels. Mass-market buyers reported a slight bump in satisfaction, while premium buyers felt that pricing was less fair than a year before. ItÂ’s an interesting contrast, showing that dealer pricing tactics can significantly impact satisfaction with the sales process. Fewer people may be paying more than MSRP, but several premium models still list with significant markups. Even more interesting is PorscheÂ’s top spot on the satisfaction list, as its cars often sell with huge upcharges, and itÂ’s exceedingly tricky even to get a build allocation for some models. Buick Chevrolet GMC Porsche Car Buying Ownership
Meet Alex Archer, the engineer behind GM's power-sliding center console
Sat, Feb 15 2020In 2009, a GM manager complained to a 59-year-old GM technician about the hassle of retrieving items from a pickup truck bed after driving shifted the cargo. In two days, the tech had come up with the ideas that, ten years later, would debut as the MultiPro tailgate. The engineering teams kept the tailgate secret in part by hiding mock-ups in a locked storage closet in GM's Vehicle Engineering Center in Warren Michigan for two years. A piece in the Detroit Free Press reveals that another storage closet in Warren would play the same role in a different cloak-and-dagger operation, this time for the power-sliding center console in GM's new full-sized SUVs. During a meeting in early 2017, bosses gave the job of the console's creation to 24-year-old design release engineer Alex Archer, just two years out of Stanford University with a degree in engineering and product design. This time, the catalyst for the feature was an internal GM think tank called co:lab, where employees suggest ideas. Execs gave Archer the task because "They needed someone willing to ask a lot of questions," her 36-month mandate to produce a six-way console that could be a standard cubby or a gaping maw able to swallow four gallon jugs or hide a secret compartment. Clearly, she succeeded. It took Archer and the team nine months to devise a prototype, another six months to get the green light for production. As with the tailgate, the team working on the console grew to include designers, production engineers, and suppliers. Archer, now 26, shepherded the process, and her name is on the patent. "It took a ton of people, I'm just somebody who stuck with it the whole time," she said. GM like her work well enough to produce the "Day in the Life" segment above, five months before the world would hear about the console. Archer's path to engineering was as unlikely as getting the job for the console. She had entered Stanford with plans to be a doctor. But an innovation class during her freshman year, and a sophomore summer spent helping her grandfather rebuild a 1937 MG engine recharted her course. Her grandfather told her, "You know, you could be an engineer for a car company." Consumer reaction to Archer's work won't be far off, the SUVs slated to hit dealerships soon. Meanwhile, she's busy on something that could be just as intense as the console: Restoring a 1955 Packard Clipper in her garage. Head to Freep to check out the story of Archer and the console. Related Video: