2008 Chev Silverado 2wd 4.8 V8 Standard Cab Short Bed. 22" Wheels Flow Master Ex on 2040-cars

Auto blog

Chevy Bolt interior spied for first time

Chevrolet is continuing work on its Bolt EV, but thanks to some public-road testing in what looks to be somewhere in Michigan, we've captured our first look at the new hatchback's screen-intensive dash. Looking like a blend of the Chevy Sonic with the new Volt, the Bolt's interior follows a simple formula, offering a digital display in place of the traditional instrument cluster alongside a large, prominent display in the center stack. Nothing too shocking, except for the fact that both displays look larger than what's in the Volt. What's most surprising, though, is the shifter. It looks almost BMW-like in appearance. There's a dedicated park button accessible by the driver's thumb, and we're guessing a trigger on the front that can toggle the lever forward into reverse and backwards into drive. The central display, meanwhile, looks like it's running some very different looking software, compared to Chevy's usual MyLink fare. We can't be sure whether this is simply some development software that's free of polish and not intended for production, or a look at a new form of Chevy's connectivity suite. Aside from some different wheels, the exterior of this prototype looks unchanged from the last round of spy photos we captured of the new Bolt. Sorry kids, no new exterior styling to show you today. Still, we've included the entire crop of spy images, covering a variety of exterior angles along with several shots of the interior. Related Video:

GM recalling 686k Lambda-platform models for hatch repair

General Motors is recalling 686,287 units of its Lambda platform crossovers. On models equipped with a power rear hatch the system can potentially fail. This campaign includes the 2008-2012 Buick Enclave, 2009-2012 Chevrolet Traverse, 2007-2012 GMC Acadia, and 2007-2010 Saturn Outlook. According to GM's documents to the National Highway Traffic Safety Administration (as a PDF), dirt can get into a portion of the strut that holds up the hatch and cause the part to prematurely fail. There's a redundancy in place called the Prop Rod Recovery system that's designed to shut the liftgate if there's a malfunction. However, if the breakdown happens too quickly after the hatch is opened the prop rod might not work the way it's supposed to. If someone were in the way of the falling liftgate, they could be hurt. For the repair, dealers will update the software for the power liftgate actuator motor control unit to prevent the hatch from closing so quickly. They'll also check the operation of the system afterward. Related Video: RECALL Subject : Liftgate Struts may Fail and Liftgate may Fall Report Receipt Date: JUN 30, 2015 NHTSA Campaign Number: 15V415000 Component(s): STRUCTURE Potential Number of Units Affected: 686,287 All Products Associated with this Recall Vehicle Make Model Model Year(s) BUICK ENCLAVE 2008-2012 CHEVROLET TRAVERSE 2009-2012 GMC ACADIA 2007-2012 SATURN OUTLOOK 2007-2010 Details Manufacturer: General Motors LLC SUMMARY: General Motors LLC (GM) is recalling certain model year 2008-2012 Buick Enclave vehicles manufactured January 3, 2007, to February 29, 2012, 2009-2012 Chevrolet Traverse vehicles manufactured July 6, 2008, to February 29, 2012, 2007-2012 GMC Acadia vehicles manufactured September 15, 2006, to February 29, 2012, and 2007-2010 Saturn Outlook vehicles manufactured August 17, 2006, to March 18, 2010. The affected vehicles, equipped with the power liftgate option, have gas struts that hold the power liftgate up when open. These struts may prematurely wear and the open liftgate may suddenly fall. CONSEQUENCE: If the open liftgate unexpectedly falls, it may strike a person, increasing their risk of injury. REMEDY: GM will notify owners, and dealers will update the software for the power liftgate actuator motor control unit so that the motor will prevent the rapid closing of the lift gate, free of charge. The manufacturer has not yet provided a notification schedule.

2016 Chevrolet Camaro: Everything we know so far [UPDATE]

UPDATE: We fully expect the floodgates to open as facts and photos leak throughout the day. Watch this space for more information as it breaks, including these leaked photos, and some new powertrain speculation. Chevrolet has made a grand production of teasing the all-new, sixth-generation Camaro. That slow trickle will become a deluge this weekend, when the 2016 model hits the stage on Detroit's Belle Isle as part of an all-day Camaro-palooza. Considering you're likely to hear plenty about the next-gen muscle car in the next couple days, we figured now is the perfect time to sort out all the facts and rumors we've heard about the next-generation coupe that's coming this weekend. Here's everything we know about Camaro Six. What Will It Look Like? Arguably the easiest Camaro question to answer after all the teasers and spy shots, General Motors' design team favored evolving the current car's retro design language while retaining the same basic shape. The long hood will carry on, joined by an even shorter, wing-topped rear deck, giving the 2016 an almost fastback-like look. The greenhouse is still slim, but lateral visibility may improve slightly owing to the larger quarter windows. We can only hope. The rear end looks to have been rounded, while Chevy's own teaser shows off larger, more prominent taillight housings than the simple rectangular lights on today's car. Expect quad-tipped exhausts to be offered on at least one version of the Camaro. Judging by the single teaser of the car's profile, the rear haunches will be larger and more chiseled. The muscular aluminum hood and its accompanying power bulge are more heavily styled than on today's car, although it looks largely similar in terms of size. It sits atop an even slimmer upper grille that's barely big enough for Chevy's Bowtie logo, with most of the visual mass moving to the gaping lower grille. One of the more tantalizing rumors surrounding the new Camaro focuses on its roof. As evidenced in a rather bizarre round of spy photos, it almost looks like Chevy is considering a removable panel, a la Corvette Stingray. T-tops are also a distinct (and more probable, we hope) possibility. The new shape will result in a more aerodynamic car, and Chevy claims the 2016 Camaro spent 350 hours in the wind tunnel. Overall lift has apparently been cut by 30 percent, thanks partially to a new, smooth underbody panel. Chevrolet has been far less forthcoming with information on the new Camaro's cabin.