1977 Chevrolet C-10 Stepside on 2040-cars

Auto blog

GM recalls nearly 1 million vehicles for airbag defect

WASHINGTON — General Motors said on Friday it will recall nearly 1 million sport utility vehicles in the United States because the driver's airbag inflator may explode during deployment. The recall covers 994,763 Buick Enclave, Chevrolet Traverse, and GMC Acadia vehicles from the 2014 through 2017 model years with modules produced by ARC Automotive Inc. Dealers will replace the driver's airbag module. The National Highway Traffic Safety Administration said a driver in Michigan of a 2017 Chevrolet Traverse was in a crash in which the front-driver airbag inflator ruptured during deployment causing facial injuries. An April 25 inspection confirmed that the front driver airbag inflator ruptured in the vehicle. The National Highway Traffic Safety Administration (NHTSA) demanded the recall of 67 million air bag inflators because it believes there is a safety defect, but auto supplier ARC Automotive Inc rejected the U.S. regulator's request, documents released on Friday show. The auto safety agency said the inflators pose an unreasonable risk of death or injury. Even as ruptures mount, "ARC has not made a defect determination that would require a recall of this population," NHTSA said in its demand letter to the Tennessee-based company. "Air bag inflators that project metal fragments into vehicle occupants, rather than properly inflating the attached air bag, create an unreasonable risk of death and injury." GM said it was still investigating the issue with the assistance of a third-party engineering firm. "GM is taking this expanded field action out of an abundance of caution and with the safety of our customers as our highest priority," the Detroit automaker said. GM said it was aware of two prior ruptures of ARC-manufactured airbag inflators in 2015 Chevrolet Traverse vehicles, and GM conducted two earlier small recalls of about 3,000 ARC inflators. All three rupture events in Chevrolet Traverse vehicles involved the same inflator variant. ARC noted in a letter made public Friday that no root cause for those ruptures has been identified by ARC or GM. ARC said it was assessing the scope of GMÂ’s recall.  Government/Legal Recalls Buick Chevrolet GMC Safety Crossover SUV

Chevy Express, GMC Savanna reportedly ending production for 2025

The oldest commercial vans on the market may only have a few years left, according to a report from Autoweek. The news outlet cited a "competitive analysis source" in saying that the Chevy Express and GMC Savanna commercial vans would be discontinued after the 2025 model year. They would then be replaced by a new electric van, likely Ultium-platform based, for the 2026 model year. We reached out to GM for comment, and this is the official statement sent to us: "We have said in the past that as part of GM’s larger EV acceleration plans that we will add two new vehicles to our commercial portfolio. The first is a full-sized battery electric cargo van and the second is a medium-duty truck that will put both Ultium and our Hydrotec hydrogen fuel cell technology to work. We have not disclosed timing, names or shared any other details, so any articles reporting more are purely speculative." The GM vans are mighty old, having been introduced for the 1996 model year. They've barely changed since then, having received just some facelifts and updated powertrains over the years. And with GM's electrification plans, we're not surprised that these vans will be on the way out. We do have some disagreement about the reported timeline for replacement, though. We suspect that the upcoming electric vans will overlap with the old vans for at least a year. The reason being that there are a lot of these vans on the road, and there are a lot of pieces of equipment that fit them. Box vans, buses and more have components that have been designed for the Express and Savanna. If you're a fleet that has invested in these components, you might not be ready to shift over to a whole new platform. So GM will probably want to give fleet buyers one last opportunity to replace any old vans before committing entirely to a new electric van platform. It will also be interesting to see what kind of market the GM electric vans enter. Ford already has its electric Transit on the way, and Stellantis will be launching the Ram ProMaster electric van next year. Those are both based on existing gas-powered vans. And GM itself has already delivered the first of its larger BrightDrop EV600 electric vans to FedEx. The coming GM vans will likely be new platforms, which could give them performance and range advantages, though the Ford and Stellantis vans will have the advantage of being compatible with equipment for the gas variants.

Honda, Chevy reveal low-drag speedway aero for Indy 500

As the two automakers currently participating in the IndyCar Series, both Chevy and Honda were invited this year not only to provide engines to the teams on the starting grid, but to develop their own aerodynamics packages as well. Both revealed their designs for the road-course races a few months ago, but with the Indy 500 approaching at break-neck speed, they've now unleashed their aero approaches for speedways. Both are based on the Dallara DW12 chassis introduced to the series a couple of years ago, but sacrifice some of their downforce at the altar of speed. And you can tell as much from looking at them: both Honda (above) and Chevy (below) have streamlined their designs, with single-plane front wings, lower-profile rear wings and fewer winglets on the body and around the wheels in between. The idea is to allow the cars to reach higher top speeds with less drag, while offering the necessary amount of downforce for the banked turns. With the four opening road-course rounds complete, teams using either automaker's equipment will keep the existing aero kits on their cars for the Grand Prix of Indianapolis on the infield course next week, then switch to the speedway package for the Indianapolis 500 later this month. Then it'll be back and forth for the rest of the season as the circus switches between road courses and speedways. Honda Unveils 2015 IndyCar Super Speedway Aero Kit Apr 30, 2015 - SPEEDWAY, Indiana - To be used at the Indianapolis 500 - Manufacturer seeking 11th Indianapolis 500 victory since 2004 - First public running to take place Sunday at Indianapolis Honda today debuted the "Super Speedway" aero kit of aerodynamic upgrades and components its teams will use at this year's 99th running of the Indianapolis 500. The Honda Super Speedway Aero Kit, produced by Honda Performance Development, Honda's racing arm in North America, includes a variety of individual aerodynamic components fitted to the existing Honda-powered Dallara Indy car chassis. All are intended to give Honda's six Indy car teams – encompassing a potential 17 '500' entrants - the ability to maximize performance at the 2.5-mile Indianapolis Motor Speedway oval and other large ovals ( over one mile in length) on the 2015 Verizon IndyCar Series schedule. "We're excited to unveil our Super Speedway aero kit, the newest element in this era of enhanced manufacturer competition in the Verizon IndyCar Series," said Art St. Cyr, president of HPD.