1970 Chevy C-10 Longbed Pickup on 2040-cars

Auto blog

Least reliable cars and trucks of 2022

Related: Most reliable cars and trucks of 2022   Every year, Consumer Reports ranks new cars based on their predicted reliability. We often see Toyota, Lexus, and a few other automakers near the top. But on the other side of the coin, the list of least reliable vehicles sometimes contains surprises.   The organization surveys its members to determine the vehicles that exhibited the most problems over the prior year. Owners are asked about creaks and rattles, the durability of parts and trim, and mechanical issues. Consumer Reports assigns a weight to each problem and then uses them to create a score, with 100 being the best. Some familiar names appear on the list of least reliable vehicles (in order with the lowest predicted reliability score at the top), but there are a few eyebrow-raising models, followed by CR's score: Ford F-150 Hybrid: 4 Hyundai Kona Electric: 5 Lincoln Aviator: 8 Nissan Sentra: 9 Ford Explorer: 16 Chevrolet Bolt: 17 Chevrolet Silverado 1500/GMC Sierra 1500: 19 Jeep Gladiator: 21 Mercedes-Benz GLE: 23 Jeep Wrangler: 24 Consumer Reports noted that sedans are the most reliable vehicle category and found that trucks are far lower on the list. That said, the survey showed that trucks from American brands tended to have better reliability scores, so it’s surprising to see GMÂ’s big two and the Ford F-150 on the list. Part of their problematic ownership experience could be due to the fact that all three trucks have received recent updates, and the Ford was completely redesigned for 2022. New tech, fresh drivetrain components, and other improvements can upset the balance of reliability and make newer models look less dependable than their older counterparts. Related video: Green Chevrolet Ford GMC Hyundai Jeep Lincoln Mercedes-Benz Nissan Car Buying Truck Crossover Hatchback SUV Electric Hybrid Sedan Consumer Reports reliability

GM and Ford quarterly sales continue to slump in China

BEIJING — General Motors and Ford announced their quarterly sales in China fell, albeit at a slower pace sequentially, as the U.S. automakers were hit by a slowing economy amid the Sino-U.S. trade war. GM's vehicle sales in China for the quarter ended June 30 dropped 12.2%, while Ford's sales slumped by 21.7%. While GM also suffered from heightened competition in its key mid-priced SUV segment, Ford was hurt by the limited new models for customers to choose from. For the first quarter of this year, Ford's sales in China tumbled 35.8 percent while GM's skid 17.5 percent. Still, the numbers from GM, the second biggest international automaker in China by sales, and Ford portend more uncertainty for the industry which is trying to rebound from a downward spiral that led to its first annual sales decline last year in more than two decades. GM delivered 1.57 million vehicles in China in the January-June period this year, while Ford delivered 290,321 vehicles. China's factory activity shrank more than expected in June, highlighting the need for more economic stimulus amid higher U.S. tariffs and weaker domestic demand. Annual car sales in China fell last year for the first time since the 1990s, and they are expected to fall this year too. Sales tumbled 16.4% in May from the same month a year prior, the China Association of Automobile Manufacturers (CAAM) said. That marked the 11th consecutive month of decline and followed falls of 14.6% in April and 5.2% in March. U.S. car companies' share of total China passenger vehicles sales fell to 9.6% in the first five months of this year from 10.9% in the year-ago period, according to CAAM. Over the same period, German car makers' share has risen to 23.3% from 20.9% and Japanese auto makers' to 21.3% from 17.3%. CAAM is set to announce June sales next week, which industry analysts forecast will be negative.   New models In China, GM has a joint venture with SAIC Motor Corp, in which the Buick, Chevrolet and Cadillac are made. It also has another venture, with SAIC and GuangxiAutomobile Group, in which they make no-frills minivans and have started to make higher-end cars. Sales of GM's affordable brand Baojun dropped 31.8% for the latest quarter. But luxury brand Cadillac's sales jumped 36.6%. GM sold 3.64 million units in China last year, down from 4.04 units in 2017. Ford makes cars in China through its joint venture with Chongqing Changan Automobile Co and Jiangling Motors Corp (JMC).

Chevy's 6.6-liter Duramax is pretty much all new

To say there's a heated battle in heavy-duty pickups is an understatement, with Chevrolet, Ford, and Ram constantly trading blows of increased torque, horsepower, and towing capacity. The latest salvo is the revised, more powerful turbo diesel 6.6-liter Duramax V8 in the 2017 Chevy Silverado. It has 910 pound-feet of torque, an increase of 145, putting it nearly level with the Ford Super Duty. Here's a closer look at where those gains come from. How exactly did Chevrolet add all that torque plus 48 horsepower? The automaker essentially took a fine-tooth comb to the entire engine. Chevy says it changed 90 percent of the V8, and the cumulative effect of those small changes adds up to big increases. As you might guess, the turbocharger is updated. The larger unit features electric actuation of the variable nozzle turbine (VNT), and what Chevy calls a double axle cartridge mechanism that separates the VNT moving parts from the housing. That helps with heat performance as well, with a claim that the exhaust side of the turbo can run continuously up to 1,436 degrees Fahrenheit. Helping that cause are six exhaust gaskets made of Inconel - an nickel alloy that contains chromium and iron – and upgraded stainless steel for the exhaust manifold. Despite having the same cast iron cylinder block, albeit with some minor enhancements, the engine has new cylinder heads, pistons, piston pins, connecting rods, and crankshaft, which have all been upgraded to handle 20 percent higher cylinder pressures. Alongside the increase in pressure, Chevrolet also increased the cylinder head's structure with a honeycomb design. The pattern features high-strength aluminum with dual layer water jackets that not only improve strength, but also optimize water flow for better cooling. For 2017, the cylinder head also benefits from integrated plenum that aids the engine in getting more air under heavy loads. The cylinder head isn't the only component to get a minor update, as the pistons have a larger diameter pin for improved oil flow. The same detailed improvements has been bestowed to the humble connecting rods (second in our hearts only to the inanimate carbon rod). The new design has the bolts oriented roughly 45-degrees to the rod instead of parallel. The angle split design, as it's called allows for easier passage through the cylinder.