1968 Chevy Short Bed K-10 Truck 4wd Ultra Rare!! on 2040-cars
Lynchburg, Virginia, United States
Vehicle Title:Clear
Engine:409
Mileage: 46,871
Make: Chevrolet
Number of Cylinders: 8
Model: C-10
Trim: K-10 4WD
Options: 4-Wheel Drive
Drive Type: 4WD
1968 Chevy 4x4 short bed truck. It's been in my family for over 27 years and garaged kept for almost all of it. This is a one of a kind for sure! My uncle restored it 27 years ago to what you see today. It's a California truck which explains the minimal rust. It has some wear and scratches and even some rust (around the cab drip rail) as you will see in the photos. The body is in great shape and the interior is almost perfect. It's one of 1449 short bed 4x4 trucks made that year and has survived the years with minimal modifications. The one modification is the engine. It's has a true 409 engine! From what I can find its from a 63-64 passenger car, 340 hp. Yep, the good 'ole W series is in this Chevy 4x4 truck and it runs like a champ! From what I can tell all the parts to the engine are matched to the block. Even the carb appears stock. Odometer works fine and shows 46,871 although actual mileage is unknown. '68 Chevy K-10 Short Bed 4WD Truck Very rare, unique find! Family owned for over 25 years California Survivor. Repainted and engine swap 27 years ago 1 of 1449 Produced, K-code, E-code, 4wd, 4-spd, PS, PB Legendary 409 c.i. engine, 4 barrel carb. All factory parts Unmolested interior. excellent condition! Recently cleaned, runs great. Questions prior to bidding welcomed. Winning bidder responsible for shipping or local pick up. Payment in full before vehicle is released. Deposit of $500 due within 48 hrs. of auction endiing. Vehicle also for sale locally.
Chevrolet C-10 for Sale
Auto Services in Virginia
Unique Auto Sales ★★★★★
Tony`s Auto Body Shop ★★★★★
The Tire Shop ★★★★★
TC Mobile Detailing ★★★★★
Snow`s Auto Repair ★★★★★
Sherwood Hills Automotive ★★★★★
Auto blog
Nissan recalls 3.5 million vehicles over airbag sensor
Sat, Apr 30 2016Nissan is recalling 3.53 million vehicles globally – 3.2 million in the United States – because the front passenger airbag may or may not deploy properly in the event of a crash. In affected vehicles, the occupant sensing system may not properly register a person sitting in the passenger seat. Passenger-side airbags in roughly 622,000 Nissan Sentra models built between 2013 and 2016 may deploy in crashes when they shouldn't, such as when a child is in the seat. 2016-2017 Nissan Maxima, 2013-2016 Nissan Altima, NV200, and LEAF, 2013-2017 Nissan Pathfinder, 2014-2016 Nissan NV200 Taxi, Infiniti QX60 and Q50, 2014-2017 Nissan Rogue, 2015-2016 Nissan Murano, Chevrolet City Express and 2013 Infiniti JX35 vehicles suffer from the opposite problem. In those models, the airbag may not deploy when it is supposed to. Nissan is aware of at least three crashes where airbags in one of the above models did not function properly, resulting in "moderate injuries." There have already been four recalls since 2013 for similar issues in Nissan vehicles. If you own one of these cars, expect a letter from Nissan in short order (or from GM if you own a Chevy City Express). Related Video: RECALL Subject : Passenger Air Bag may not Deploy due to OCS Error , 1 INVESTIGATION(S) Report Receipt Date: APR 26, 2016 NHTSA Campaign Number: 16V244000 Component(s): AIR BAGS Manufacturer: Nissan North America, Inc. SUMMARY: Nissan North America, Inc. (Nissan) is recalling certain model year 2016-2017 Nissan Maxima, 2013-2016 Nissan Altima, NV200, LEAF and Sentra, 2013-2017 Nissan Pathfinder, 2014-2016 Nissan NV200 Taxi, Infiniti QX60 and Q50, 2014-2017 Nissan Rogue, 2015-2016 Nissan Murano, Chevrolet City Express and 2013 Infiniti JX35 vehicles. In these vehicles, the front seat passenger Occupant Classification System (OCS) may incorrectly classify an adult passenger as a child or classify the seat as empty despite it being occupied. As a result, the passenger frontal air bag may be turned off and not deploy in the event of a crash. CONSEQUENCE: If the passenger frontal air bag does not deploy as intended in the event of a crash, the passenger is at an increased risk of injury. REMEDY: Nissan will notify their owners. Chevrolet City Express owners will be notified by General Motors.
Is the skill of rev matching being lost to computers?
Fri, Oct 9 2015If the ability to drive a vehicle equipped with a manual gearbox is becoming a lost art, then the skill of being able to match revs on downshifts is the stuff they would teach at the automotive equivalent of the Shaolin Temple. The usefulness of rev matching in street driving is limited most of the time – aside from sounding cool and impressing your friends. But out on a race track or the occasional fast, windy road, its benefits are abundantly clear. While in motion, the engine speed and wheel speed of a vehicle with a manual transmission are kept in sync when the clutch is engaged (i.e. when the clutch pedal is not being pressed down). However, when changing gear, that mechanical link is severed briefly, and the synchronization between the motor and wheels is broken. When upshifting during acceleration, this isn't much of an issue, as there's typically not a huge disparity between engine speed and wheel speed as a car accelerates. Rev-matching downshifts is the stuff they would teach at the automotive equivalent of the Shaolin Temple. But when slowing down and downshifting – as you might do when approaching a corner at a high rate of speed – that gap of time caused by the disengagement of the clutch from the engine causes the revs to drop. Without bringing up the revs somehow to help the engine speed match the wheel speed in the gear you're about to use, you'll typically get a sudden jolt when re-engaging the clutch as physics brings everything back into sync. That jolt can be a big problem when you're moving along swiftly, causing instability or even a loss of traction, particularly in rear-wheel-drive cars. So the point of rev matching is to blip the throttle simultaneously as you downshift gears in order to bring the engine speed to a closer match with the wheel speed before you re-engage the clutch in that lower gear, in turn providing a much smoother downshift. When braking is thrown in, you get heel-toe downshifting, which involves some dexterity to use all three pedals at the same time with just two feet – clutch in, slow the car while revving, clutch out. However, even if you're aware of heel-toe technique and the basic elements of how to perform a rev match, perfecting it to the point of making it useful can be difficult.
2021 Chevy Colorado and GMC Canyon facelift spied
Fri, Sep 20 2019The Chevy Colorado and its GMC Canyon twin have been on sale for a good long time now, and while things move a little more slowly on the truck side when it comes to facelifts and model changeovers, it seems like it’s about time. So itÂ’s no surprise to see some lightly camouflaged trucks running around ahead of what appears to be a minor refresh for the 2021 model year. Starting with the Colorado, it appears to have a bowtie hiding behind some camo in the center of the grille, which otherwise looks like the no-bowtie option you can get on 2019-and-up trucks. It could be that Chevy is keeping the no-bowtie grille design but allowing a bowtie to grace it, or it could be misdirection. Either way, the grille pattern adds a bit of flair to the otherwise staid front end design. There also appears to be a bit more shape to the lower air inlet, with echoes of some of the lower fascias of its bigger Silverado stablemate. The Canyon, on the other hand, shows more extensive front-end changes. At first glance, it looks to emulate some variants of the GMC Sierra, which would make sense given those modelsÂ’ changes for the 2020 model year. In particular, this Canyon has hints of Sierra HD, being more square and monolithic than the regular Sierra 1500s, although itÂ’s a little hard to tell with the camo covering the edges of the grille. It could certainly also adopt more rounded corners like the 1500s. Either way, itÂ’s more vertical and thereÂ’s less differentiation between the upper grille and lower opening. ThereÂ’s nothing in the way of changes around the sides or back, and while there may be some minor changes inside, we arenÂ’t expecting any. The word around town is that this isnÂ’t a full facelift, but rather a minor front end tweak thatÂ’ll just be a regular part of the model-year changeover.Â





















Stepside chevrolet c-10 pickup, short bed
1972 chevy c10 short bed 383 stroker
70 chevy c10 pickup 350 auto air
1963 half ton fleet side chevy pickup c10
1978 c10 showtruck
1963 chevrolet c10 - rat rod/ shop truck