1968 Chevrolet C-10 Stepside - Complete No Rust. on 2040-cars

Auto blog

Fullsize GM SUVs have a problem that's making owners sick

Some fullsize SUV owners are getting sick, thanks to a buffeting and vibration problem in 2015 model year examples of the Chevy Tahoe and Suburban, Cadillac Escalade, and GMC Yukon. According to owners' complaints to the National Highway Traffic Safety Administration, the issue can vary from an annoying vibration inside the cabin to an experience so severe that it leads to dizziness and headaches. General Motors is aware of the complaints, but the fix isn't so simple. According to spokesperson Tom Wilkinson to Autoblog, the company "has been tracking this issue for a while." The problem has a fairly low incidence rate, but when it does occur the issue can be "uncomfortable and annoying for owners." There's no precise cause for the issue, Wilkinson claims, and in some cases, simply balancing the tires or changing the door seals can make it go away. However, not all of the fixes are so simple. AutoGuide dug deep into the problem and discovered a GM preliminary information bulletin that advised dealers to remove the headliner and to check the roof's bonds to the bows that go across the vehicle. However, that document included a note that the solution might not entirely eliminate things. According to AutoGuide, adding Dynamat insulation to the roof sometimes helped the problem. A GM spokesperson also told AutoGuide the company fixed the problem at the end of the 2015 model year, and didn't go into any more detail. This roof issue seems linked to some of the worst droning in these SUVs. According to one complaint from a 2015 Suburban owner to NHTSA: "Roof will not remain attached to the roof bows. This causes the buffeting similar to a window being down when all are up. The results span from annoying to painful." A 2015 Yukon owner claims to have another alleged cause for the problem in a NHTSA complaint from February 2015. This person brought their SUV to the dealer seven times over the course of four weeks for vibrations. The dealer replaced the driveshaft, suspension components, and more, but nothing worked. According to an engineer to the service adviser: "In an effort to prevent roll overs, they designed the frame and body mounts too stiff. There are 40 engineers working on issues, they have no solutions that work across the board." Wilkinson told Autoblog that GM is working with customers on an individual basis to rectify things. Since these are newer vehicles, dealers should also fix the problem under warranty.

Weekly Recap: BMW rolls out ambitious plug-in hybrid electric plan

"We believe that for the United States, this is going to be very important." – Julian Arguelles Let there be no doubt, BMW is serious about electric vehicles. The German automaker said this week it will make plug-in hybrid versions of all of its core models, an aggressive move that demonstrates its commitment to electric propulsion systems. BMW did not specify which vehicles will get the plug-in systems or provide a timeline for when they will arrive. But the announcement is clearly more than blustering, and the company revealed a 3 Series plug-in prototype this week at an event in France. BMW said the 3 Series uses a version of its 2.0-liter turbocharged four-cylinder engine (240 horsepower, 300 pound feet of torque) with an electric motor sandwiched between the engine and transmission in place of the torque converter. It has an all-electric range of 22 miles. A plug-in X5 with the same powertrain was also displayed alongside the 3 Series, though the X5 has been on the auto-show circuit for more than a year, including a recent stop in Los Angeles. Those two vehicles use "eDrive," and BMW's plans represent the first widespread transfer of its technology from development of the i3 and i8 models to more mainstream products. BMW said it's developing electric powertrains so they can be deployed rapidly across its range, and they are flexible enough to be used with fuel cells in future products. Enticingly, BMW is also working on a "Power eDrive" system, which debuted in a 5 Series GT concept at the event in France. This setup has two electric motors powered by a 20-kilowatt-hour battery pack, and when teamed with a four-cylinder turbo, pump out about 670 hp. Reinforcing BMW's commitment, the company will add more than 200 jobs at its factory in Dingolfing, Germany, to support electric-vehicle development. The moves come as BMW and other automakers diversify their portfolios while fuel economy and emissions regulations are getting tighter around the world. The United States has set a 54.5-mpg CAFE requirement for the 2025 model year. BMW said the electric vehicles were developed with an eye toward the US market, its government policies and its wide-ranging commuting styles. "We believe that for the United States, this is going to be very important," spokesman Julian Arguelles said. Ben Scott, a senior analyst in London with automotive research firm IHS, said BMW's moves are expensive – but necessary – to keep pace with the market.

Why 2015 is going to be a huge year for trucks

Nissan chief executive Carlos Ghosn took center stage to introduce the 2016 Titan last week at the Detroit Auto Show. He spoke of the truck's new features, impressive Cummins V8 diesel engine and the extensive amount of time and money required to build a modern, competitive pickup truck. "We have done all of this because we see opportunity – an opportunity in the unmet needs of today's American truck customers," Ghosn said. He was speaking about the Titan, but his thoughts echo the industry's mindset: When it comes to trucks, find an opportunity and attack. Even with CAFE regulations looming and fickle consumer preferences, investing in trucks is a no-brainer for automakers. Some consumers will always need a truck for their job or lifestyle. And some people will always want one, whether they need it or not. With that in mind, here are four reasons why the pickup-truck sector is more important than ever and poised for growth in 2015. View 24 Photos The Nissan Titan Is Back Okay, it never left, but the Titan hadn't been redesigned since its launch in 2003, and Nissan sold more NV200s than Titans in 2014. It's an understatement to say the truck was languishing. That all changes with the 2016 model. The Titan will come in two variants, a traditional fullsize competitor and the Titan XD. The XD will lead the market launch, and it arrives late this year. It's pitched as a "whitespace" offering, Nissan sales and marketing vice president Fred Diaz said. The idea is to offer something in the general size and price range of a fullsize truck, but also have some of the capability of a heavy-duty truck. The XD uses a fully boxed ladder frame, the chassis design from Nissan's commercial division, and the wheelbase is about 20 inches longer than other Titan models. The XD, which Nissan is calling the flagship of the line, will be the only model with the 5.0-liter Cummins turbodiesel V8. It produces 310 horsepower and 555 pound-feet of torque, while being able to tow 12,000 pounds. V6 and V8 gasoline models will also be offered on the Titan XD and the standard, non-XD model. When production ramps up, the Titan will be sold with several cabs, beds and trims. New features include trailer sway control, an integrated trailer brake controller, more storage options in the cabin and even laminated front and rear side glass to reduce outside noise. All of this has given Nissan fresh confidence in an area where it admittedly has been lacking. "We can compete," Diaz told Autoblog.