1964 Chevrolet Truck Shortbed Stepside on 2040-cars

Auto blog

Six-week production shutdown planned for 2016 Chevy Volt

It's no surprise that GM is winding down production of the first-gen Chevy Volt as it prepares to start building the second-gen for a launch in the second half of this year, but for now, things are proceeding as planned, according to Chevrolet spokesperson Michelle Malcho. Malcho told AutoblogGreen that GM "is still making first generation Volt" and that there has been no announcement about when that will change. The only details she would divulge is that, "It will be this summer." "Halting Chevrolet Volt production in anticipation of the all-new 2016 model year is a smart move for GM," Akshay Anand, an analyst at Kelley Blue Book's KBB.com, said in a statement. "[The move] allows for less inventory and incentives on the outgoing model. Hybrid and alternative fuel vehicle sales have been declining for some time now, with gas prices well below the summer prices of 2014." Volt production will cease in the weeks before the traditional two-week auto plant shutdown over the July 4 holiday. A high inventory of Volts is a factor in the production cuts, but not the only one, Malcho said. The plant construction, engineering changes and pre-production plans for the new Volt and CT6 all were part of the decision, she said. Nationwide, there is about a 200-day supply of Volts on dealer lots (roughly 100 days in California, the car's biggest market), according to the Detroit Free Press, which says there will be a six-week retooling period (twice as long as normal, but other sources say the shutdown will be four weeks long) at GM's Hamtramck plant this summer to get ready for the second-gen model. The 2016 Volt will get an increase in all-electric range to 50 miles and will then get 41 miles per gallon when the battery runs out. It also has a fifth seat that straddles the battery tunnel and a larger li-ion battery. Related Video: The AP contributed to this report. Featured Gallery 2016 Chevy Volt View 16 Photos News Source: GM, Detroit Free Press Green Plants/Manufacturing Chevrolet Electric Hybrid

Cadillac Celestiq, Lyriq, Hummer, other future GM electric cars: Here's everything we saw at ‘EV Day’

WARREN, Mich. — Today, General Motors held an “EV Day” event at its Warren, Michigan, campus to present its new “Ultium” battery technology, modular electric vehicle architecture and soon-to-come electric vehicles. Unfortunately, we were forbidden from bringing cameras into the event, so while we canÂ’t show you what we saw, we can tell you more about it. While we saw the previously teased Cadillac EV (which we now know to be called the Lyriq) and the GMC Hummer pickup teased during the Super Bowl, there were a number of other future cars at the event, which GM President Mark Reuss assured us are all real vehicles in the works. The biggest surprise came at the end of the event, though, in the Cadillac Celestiq electric sedan, which Reuss described as a future flagship that would be hand-built “very locally.” It had been hiding under a dark sheet all morning, with the front and rear illuminated Cadillac emblems shining from underneath. When the wraps came off, we saw a long, white, four-seat fastback sedan. The 23-inch wheels were pushed out to the very corners of the car, giving it what appeared to be a very long wheelbase. The model on the stage had no side mirrors or visible door handles. The grille mirrored that of the Lyriq crossover next to it, with integrated lighting in lieu of the usual mesh or slats youÂ’d see in an internal combustion car. The entire roof, all the way until it tapered to the tail of the vehicle, was tinted glass. In back, vertical tail lighting ran down the C-pillar before turning rearward across the top of the trunk. Inside, everything below the beltline of the windows — essentially all but the headrests and top portion of the steering wheel, was hidden from view. Behind the Celestiq, a large digital display showed a rendering of its interior. The dash consists of a pillar-to-pillar curved LED display serving as both instrument panel and infotainment system. Protruding forward between the front seats was another touchscreen that appeared to house some more controls, with open area, probably for storage, below it. The rear seats had the same sort of touchscreen between them. Built into the back of the front seats were a pair of rear-seat entertainment screens, much like we saw in the Lyriq. The door panels blended wood, metal and animated lighting to give character and a sense of opulence. GM interior design manager Tristan Murphy was on hand to tell us a bit more about the Celestiq.

2016 Chevy Camaro to drop 200 pounds

The sixth-generation Chevrolet Camaro makes its grand debut on May 16 at a big celebration on Detroit's Belle Isle. Until then, Chevy's strategy seems to be showing off the pony car's new components piece by piece. With the exhaust headers and front end already on display, the Bowtie is now giving a glimpse at some of the upcoming model's aluminum components. The Camaro is going on a diet for its latest generation, and Chevy claims that the switch to the Alpha platform and other new components shed over 200 pounds compared to the current model. That will put the pony car at around 3,500 pounds. The lower weight will contributes to better fuel economy, quicker acceleration and more direct handling, according to the automaker. Among the changes are aluminum front and rear suspension assemblies (pictured above) that weigh 21 percent less than the current units. Also, Chevy promises in its announcement "links on some models feature an intricate, structurally optimized design made with a rigid composite material that's even lighter than aluminum." In addition to these improved parts, the Camaro uses the lightweight metal for the beam that supports the instrument panel to save 9.7 pounds more. The only two pieces reportedly carrying over to the latest design are Chevy's bowtie and SS badges, and at least one engine in the range is known to be a version of the 6.2-liter LT1 V8. With over a month until the next Camaro's debut, we might get a glimpse of even more of the car's new parts in the coming weeks. Related Video: 2016 Camaro Does More with Less New model is at least 200 pounds lighter than current car 2015-03-30 DETROIT – For the all-new, 2016 Chevrolet Camaro, the team was challenged to improve the handling, acceleration and fuel economy of the award-winning current model. To meet all three objectives, the team focused on a singular mission: reduce mass. By obsessively searching for opportunities to save ounces, the team pared more than 200 pounds off the Camaro compared with the fifth-generation model. As a result, the Camaro does more with less, according to Al Oppenheiser, Camaro chief engineer: "We kept the cornering confidence and control that make the Gen 5 Camaro 1LE so fun to drive, and added a greater sense of agility," he said. "The new Camaro brakes harder, flicks into corners more quickly, and drives out of the corner faster.