1962 Chevy Swb Fleet Side Gasser/rat Rod Very Rare Chevrolet Vintage Classic on 2040-cars
Emmett, Idaho, United States
Body Type:Pickup Truck
Engine:none
Vehicle Title:Clear
Fuel Type:Gasoline
For Sale By:Private Seller
Number of Cylinders: 0
Make: Chevrolet
Model: C-10
Trim: c-10
Cab Type (For Trucks Only): Regular Cab
Warranty: Vehicle does NOT have an existing warranty
Drive Type: 2 wd
Mileage: 0
Exterior Color: Gray
Interior Color: Black
Disability Equipped: No
What you are bidding on is a 1962 Cevy Short Wide Box, Fleet side pick up. This truck does not run it needs motor and trans radiator drive line but it is a great start to a father son project i do have the heater assembly fan and all. or rat rod or gasser project the fenders are bad in the usual places and the floors have a bit of rust as you can see in the pics and the passenger door is bad but i have another in much better shape ill put on it befor it leaves here the rockers are or but the passenger side one will need to be pulled back out as you can see in the pics there is a crack in the windshield and someone put the gas tank in the bed it looks like to make room for speakers lol kids ...
please if you have any questions ask i will help you the best i can.
If you have LESS than 10 feed back dont even bother bidding without contacting me 1st! Or i will retract your bid. Thanks Be sure to check out my other items.
The wood in the bed will need to be replaced.
Chevrolet C-10 for Sale
Auto Services in Idaho
Windshield Rescue Inc ★★★★★
Union Gospel Mission Motors ★★★★★
S & D Automotive ★★★★★
Oakley-Moody Svc Inc ★★★★★
Meridian Automotive ★★★★★
John`s 24/7 Towing & Recovery LLC ★★★★★
Auto blog
First 2015 Chevy Corvette Z06 engine blows up at just 891 miles
Thu, Jan 1 2015You've waited and watched and waited some more for the arrival of your 650-horsepower, $78,000 Chevrolet Corvette Z06. Finally, that joyous day arrives and you eagerly, but gingerly, begin to break-in the 6.2-liter supercharged V8 monster under your hood. Then 900-odd miles after delivery, your excitement grinds, quite literally, to a halt. That's what the owner of one 2015 Z06 claimed happened to him when a simple break-in drive resulted in a lunched engine. The owner, known as Lawdogg149 on Corvette Forum, says he was out breaking-in his car ahead of a January track event when it happened. "While making a pull from 35 miles per hour, I accelerated and shifted short of redline, and boom - the car began knocking. I pulled over and popped the hood. I could hear a loud knock coming from the No. 6 cylinder area along with a serious, grinding, metal-on-metal sound coming from the supercharger area," Lawdogg wrote. A subsequent trip to the dealer confirmed his concerns, with the service facility telling Lawdogg that the No. 6 valvetrain had failed. The dealer couldn't research the issue further, though, as General Motors requested the engine be returned for a more thorough evaluation. The good news for the Z06's unlucky owner, at least, is that GM will be covering the engine replacement under warranty, an expense that Corvette Forum estimates is a nearly $24,000 procedure. At this point, the two leading theories behind the engine's detonation involve a manufacturing defect – which could be why GM is so keen to tear the blown powerplant down – or a mistake on the part of Lawdogg. As Motor Authority points out, such an error could be something as simple as the Z06's owner accidentally shifting to first rather than third during his 35-mph pull. If, however, there's a deeper manufacturing problem with the Z06's engine, this might not be the only case we end up hearing about.
Race Recap: Rolex 24 at Daytona was fast and feisty
Mon, Jan 26 2015Let the record show that victory at the 2015 Rolex 24 at Daytona went to the No. 02 Chip Ganassi Racing with Felix Sabates Target/Ford EcoBoost Riley DP driven by Verizon IndyCar drivers Scott Dixon and Tony Kanaan and NASCAR drivers Jamie McMurray and Kyle Larson. The winner did 740 laps to cover 2,634.3 miles in 24 hours and 57.667 seconds. That's a statement to this year's pace in spite of 18 cautions, two more than last year: the Michael Shank Racing Ligier got pole with a time of 1:39.194, slower than last year's pole time of 1:38.270; however, the winning car last year only did 695 laps. The fight for top honors was shaved to a four-car battle over the first third of the event. The No. 02 Ganassi car took the lead on the first lap, swapping it well into the night with the No. 01 Ganassi car, the No. 10 Wayne Taylor Racing Corvette DP, and the defending champion No. 5 Action Express Corvette DP, all of them staying within about 20 seconds of one another. The Action Express car had a fuel connector come loose and lost three laps getting towed back to the pits to have it reattached, but was back in the lead 18 hours in. The No. 01 Ganassi car dropped out with recurring clutch problems 22 hours in, retiring not long after. A race-within-the-race is where the concluding action happened, a seven minute, 30-second dash from the end of the last caution to the checkered flag. During the penultimate pit stops with an hour to go, Dixon was in second place followed Jordan Taylor in the Wayne Taylor Racing DP into the pits but beat him out, taking the lead. The Action Express car was in third. In the last pit stops of the race, Dixon gained even more time, getting a four-second advantage over Taylor. Then a full-course caution came out twenty minutes before the finish when a Prototype Challenge car hit the wall and caught fire, bunching up the field. That closed the pits, but the Wayne Taylor Racing car had to pit during that yellow because of a miscalculation of driver time. No driver can be behind the wheel for more than four hours in a six-hour period but Jordan Taylor was going to go over, so he came in to swap out for brother Ricky. That cost the team any chance of second place, since they took an additional drive-through penalty for entering closed pits. When the track went green again, Sebastien Bourdais in the Action Express car stayed all over Dixon for the final five laps but couldn't get around him.
A Chevy Camaro hybrid? That's what EcoCAR3 could bring
Fri, Apr 10 2015Figuring out a way for a hybrid powertrain to co-exist with the performance expectations of a classic American muscle car is a challenge that could vex that most experienced of automotive engineers. It's a challenge, in fact, being handed to a bunch of college students. Over the next four years, students from 16 North American colleges and universities will attempt to wring fuel efficiency from a 2016 Chevy Camaro as part of EcoCAR3, an advanced-vehicle technology competition sponsored by the Department of Energy, General Motors and others. They'll be attempting to use hybrid or plug-in hybrid technology while not sacrificing the performance of the Camaro, which was selected in part because the current model achieves just 17 miles per gallon in city driving and 28 MPGs on the highway, per EPA numbers. Students will get the latest version of the vehicle to work on, one that is expected to be unveiled next month on Belle Isle in Detroit. "If we still want to produce V8 Camaros, we're going to have to look at alternative methods of propulsion," said Al Oppenheiser, the chief engineer on the Camaro. "So the ideas that these college teams come up with could very easily be adapted to a car like the Camaro." Unlike similar competitions that reward fuel efficiency in vehicles, EcoCAR seeks those gains while emphasizing cost and consumer acceptance of these vehicles. The cars shouldn't look like experiments; they should look like everyday vehicles on the road. Previous competitions have allowed the teams to use whatever powertrain they desired. This time, EcoCAR officials designed the competition to concentrate on hybrid, hybrid-electric and diesel options. Competitors won't have the option of using hydrogen fuel cells as they have in the past. Last year, a team from Colorado State built a vehicle that contained both hydrogen and electric power sources. This year's limit is a curious choice, as some automakers such as Toyota have placed heavy bets on fuel cells in recent years. General Motors also runs a fuel-cell program. With the focus on cost and practicality, however, the program officials wanted to narrow the framework of the contest. "We always have some good decisions on what to make within the scope or out of scope," said Jim Kolhoff, global director of software engineering for General Motors.