1962 Chevy C10 Custom on 2040-cars

Auto blog

Would you pay $17 a month to give your older Ford connectivity?

When it was first introduced in 2007, there was nothing like the original Ford Sync system, since it allowed car owners to connect and use a portable device better than anything that came before it. And because it was a brought-in/tethered and software-based system, Sync leveraged a device's connectivity and was easily updated. It took competitors awhile to catch up: Toyota Entune wasn't available until 2011, and Chevy MyLink didn't roll out until 2012. But now Ford is the one playing catchup since it stuck with the brought-in strategy while most other automakers were quicker to add connectivity via an embedded cellular modem. Ford initially installed 2G/3G modems in its small fleet of electric and plug-in electric vehicles starting in 2012 so that owners could keep tabs on charging. Embedded connectivity came to Lincoln in 2014, and Ford began adding onboard 4G LTE via Sync Connect to select cars starting with the Escape in 2015. To get more cars connected more quickly, last week the automaker rolled out its FordPass SmartLink solution that plugs into the OBD port of 2010 to 2017 model year vehicles. This lets owners retroactively get onboard Wi-Fi, set up a "geo-fence" to keep tabs on a car's location, receive vehicle health reports and allows remote engine starting and door locking/unlocking using a smartphone app, among other features. But to connect older Ford vehicles will cost owners $16.99 a month for two years, not including installation. Ford throws in 1 GB of data or a 30-day trial, whichever comes first, after which owners have to add the vehicle to their Verizon shared data plan, which supplies connectivity for SmartLink, or establish a new account. (Disclosure: Autoblog is owned by Verizon.) By comparison, GM's 4G LTE data plans start at $10 a month for 200 MB and goes up to $30 for 3 GB, and owners can also add a car to an AT&T shared-data plan. But OnStar doesn't have a separate monthly subscription for the embedded modem or an installation charge, and standard features via the RemoteLink Mobile App are free for the first five years of ownership. FCA's Uconnect Access service also uses an embedded modem to provide similar telematics features for $20 per month following a free one-year trial, while a la carte in-car Wi-Fi is offered for $10 per day, $20 per week or $35 per month.

Basic configurator for 2021 Chevy Colorado and GMC Canyon slips online

TFLnow discovered basic configurators for the 2021 Chevrolet Colorado and GMC Canyon are already online at GM's site for employee discounts. These aren't the fully-featured whiz-bang configurators that will show on the retail websites soon, but they include a bunch of the relevant info a shopper would be looking for. After trim changes detailed earlier this year, the 2021 Colorado offers the most choice, even with the two-door base model gone. Cutting the entry-level Colorado also means the entry-level price has gone up by $3,900; the 2020 Colorado could be had for $22,495, but the 2021 model starts at $26,395 after the $1,195 destination charge. That gets you the extended cab with a standard bed in two-wheel drive. The 2WD crew cab with a short bed starts at $28,295, and the 2WD crew cab with a standard bed starts at $30,595. At the top end, the ZR2 model runs $44,395, which is $200 more than the 2020 version. The color palette isn't complete, but the options page shows a number of choices for packages. The Redline Special Edition Package goes up $10 to $2,690, the Tonneau and Step Package increase $100 to $1,195, a new Chrome Package puts shiny stuff in places like the door handles and steps for $300, while the Black Bowtie Emblem Package drops $80 to $140. The one-inch front leveling kit, which was thought to cost $150 based on early order information GM Authority had seen, is here listed for $450 and available on the Colorado but not the Canyon.  The Canyon makes matters a tad simpler by having many options locked in depending on which one starts with — 2WD Elevation Standard starting at $27,595, 2WD Elevation for $31,195, 4WD AT4 with a cloth interior for $39,395 or AT4 with leather for $41,195, the least expensive Denali starting at $42,095 for a crew cab short box with 2WD. The Elevation includes items like the Convenience Package that are options on the base model, and also offers a $1,400 High Elevation Package conferring heated and power black leather seats, plus a heated steering wheel, that can't be optioned on the Elevation Standard. The pinnacle is the crew cab with a standard bed in Denali 4WD trim for $45,895. Colors and many of the final options and accessories, such as the AT4 Off-Road Performance Edition Package we've heard about, are also missing here, but there's heaps to play around with to get an idea of what you'll be in for if you're considering a 2021 Canyon. Related Video:    

2016 Camaro gets most revealing tease yet

Chevrolet started its long teaser campaign for the 2016 Camaro by just revealing the exhaust manifold and front frame, but as time has passed the company has slowly unveiled more. In the latest glimpse ahead of the pony car's May 16 debut, we're actually getting to see the model's profile completely undisguised. As suggested by the recent tease of the rear and hood, the 2016 Camaro wears a sharper, more angular design than the current model. This is especially the case when you look at the taut lines making up the rear. Chevy claims that the new shape underwent 350 hours of wind tunnel tests to be able to generate left lift, improve cooling and reduce wind noise in the cabin. A smooth underbody pan is among the aerodynamic tweaks, and it runs from underneath the front grille to the center of the Camaro. Chevy asserts that all of the changes at the front help reduce lift by 30 percent. Related VIdeo: 2016 Camaro is all about the Aero Total aerodynamic lift improved by 30 percent for improved stability 2015-05-11 DETROIT – After 350 hours of wind tunnel testing – often 24 hours a day – the new Camaro will slip more easily through the wind, and drivers of the Camaro SS will experience a marked improvement in reduced aerodynamic lift. These changes illustrate the lengths the aerodynamics team went to for improved performance, stability, cooling and lower wind noise intrusion "The importance of aerodynamics increases exponentially as we increase vehicle performance," said Kirk Bennion, Exterior Design manager. "As engine output increases, we need more engine cooling. As acceleration and top speeds climb, we need to reduce lift for better high-speed stability. However, we cannot make any changes at the expense of increasing drag, which can hurt fuel economy. "To balance these different aerodynamic targets, we tested literally hundreds of changes on the new Camaro, millimeters at a time." For example, the initial design called for the lower grille bars to be set at a 20-degree angle to the horizon. However, after meticulous testing, the team improved engine-cooling airflow by 1 percent by shifting the angle to 13 degrees – a change that achieved the airflow target while maintaining the original grille design. And rather than a traditional front air dam to reduce aerodynamic lift, the team developed a flush belly pan that stretches from the front grille to the center of the vehicle.