350 Ci, Lifted 4x4, 4-speed, R12 A/c, Ps, Power Front Disc, Removable Hardtop!! on 2040-cars

Auto blog

New Takata problem results in recall of 414 GM vehicles

An airbag-inflator rupture discovered by Takata during testing has resulted in a new recall affecting 414 vehicles from General Motors, including 395 of them in the US. This latest campaign covers 2015 model-year examples of the Buick LaCrosse, Cadillac XTS, Chevrolet Camaro, Equinox, Malibu, and GMC Terrain. There are no reported breaks in any of these vehicles on the road, and the company estimates only one percent of them actually have the faulty parts. According to documents submitted to the National Highway Traffic Safety Administration (as a PDF), one side-airbag inflator failed a cold test at -40 Fahrenheit "releasing high pressure gas and propelling the separated components apart." The supplier told GM about the failure the next day. In these vehicles, the safety device might not only burst but the bag could inflate incorrectly, as well. GM and Takata say that a cause is not yet known, but they are "conducting an investigation." GM will begin notifying affected owners via overnight mail on Oct. 19. Dealers will replace the side airbag modules on all of the affected vehicles with new components outside of the suspect lot. All of the removed parts will also be collected for further study. Takata's faulty front airbag inflators have resulted in a serious scandal for the supplier. Initial figures indicated 34 million US vehicles are need of repair, though more recent figures have knocked that down to 23.4 million bad parts in 19.2 million automobiles. GM was already among the dozen automakers with models to fix, and some of its pickups were affected, along with the Saab 9-2X and Pontiac Vibe. GM Statement: General Motors is recalling 395 cars and crossovers in the U.S. because one of the front seat side air bags inflators may be defective. In the event of a deployment, the air bag's inflator may rupture and the air bag may not properly inflate. The rupture could cause metal fragments to strike the vehicle occupants, potentially resulting in serious injury or death. GM is unaware of any incidents involving vehicles with these components, which were part of a lot in which one inflator failed acceptance testing at the supplier. Dealers will replace the side air bag module or modules in affected vehicles. Including Canada, Mexico and exports, the total population of the recall is 414, GM estimates 1 percent of the recalled vehicles may have the defect.

Chevy Tahoe-to-K5 Blazer conversion shop renders Jimmy option

Back in 2019 we told you about a truck that looked like a K5 Chevy Blazer, but was actually a modern late-model Tahoe underneath. It was the product of Arkansas shop Flat Out Autos, which reskinned modern GM full-size SUVs to look like their predecessors. Now, the same shop is planning to release a GMC version, converting Yukons to Jimmys. We were impressed by Flat Out's workmanship, beautifully blending the lines of the Blazer into those of the Tahoe. The result was a cohesive design, not just a panel swap. It clearly required a lot of work, which helped justify the $69,000 price tag, not including the cost of the donor Tahoe. FlatOut Autos GMC Blazer Tahoe reskin 01 View 11 Photos At least one new owner was so impressed that they recently purchased four identical Blazer conversions at once. The quadruplets were all finished in blue with a white roof and all based on brand-new 2020 Tahoes. Obviously, with such demand it was only natural for Flat Out to explore other options. On Facebook the company said it was working on a 1972 version with an eggcrate grille. Now, they've also released a rendering paying homage to the K5 GMC Jimmy. The Jimmy conversion uses the original's quad-headlight face, crosshair grille and GMC badging. Like the Blazer conversion, it adds chrome bumpers and milled door handles while adapting the original's 2-door design to the new truck's 4-door body. The rendering only shows the front three-quarter view, but presumably a new carbon fiber rear door would have to be created as the Blazer's says "Chevrolet" across the back. Flat Out says that all the modern conveniences found on the donor Tahoe will work on the conversion, including parking, blind spot and lane keeping sensors. If you have the coin, it's a great way to have retro style without giving up modern safety and performance. The new Blazer has been disappointing to many fans that had hoped for a Bronco-like SUV. Instead, GM gave us a crossover. The Flat Out conversions might be a good compromise, and expanding it to the GMC brand only makes sense. Obviously there's no requirement to use a GMC Yukon as the donor vehicle for the Jimmy, as it's functionally identical to a Tahoe, but wouldn't you want to keep it in the family? Related Video:

2016 Chevrolet Camaro powers up, slims down

Don't be fooled by its familiar appearance, the 2016 Chevrolet Camaro is vastly different than its iconic predecessors. It has a new chassis, a fresh engine lineup, and is loaded with clever technologies that promise to invigorate and improve the sixth generation of Chevy's legendary sports car. It was revealed Saturday before a crowd of enthusiastic Camaro revelers on Belle Isle in Detroit. Redesigning the sports coupe was a heady task, especially as its archrivals, the Ford Mustang and Dodge Challenger, drive better and are more powerful than ever. But the new Camaro is aiming to be the best combination of handling and raw performance, with quick acceleration and competitive fuel economy. "Redesigning the Camaro is thrilling and challenging all at once, but the secret is to offer something more," Mark Reuss, General Motors executive vice president of product development, said in a statement. It all began with a weight-loss plan. The new Camaro shed more than 200 pounds compared with the outgoing car, with 133 pounds coming from a lighter body-in-white. Then engineers culled weight nearly everywhere, using aluminum for the instrumental panel frame and some suspension components to trim as much fat as possible. The slimmer body rests on new bones. The Camaro's rear-wheel-drive platform is lighter and stiffer in a bid to improve handling. It's a modified version of the underpinnings used by the Cadillac ATS, though about 70 percent of the architecture is unique to the Camaro. Chevy said structural rigidity is improved by 28 percent. As you'll see, healthy doses of Cadillac and Corvette technologies have been used to bolster the Camaro's drive character and performance. The new car is also expected to handle better thanks to a slightly smaller footprint. It is about two inches shorter in length, with most of that due to the more compact wheelbase. It's also an inch shorter in height and an inch slimmer in width. So yes, the Camaro will be leaner, but it will still be plenty mean. The Camaro SS tops the range (for now) with the Corvette's 6.2-liter V8 pushing put 455 horsepower and 455 pound-feet of torque. Known as the LT1, is has a cast aluminum block and cast aluminum cylinder heads, and it's fortified with direct injection, variable valve timing, and cylinder deactivation. About 20 percent of the engine's parts are said to be unique to the Camaro, including the exhaust manifolds.