1956 Chevy Bel Air on 2040-cars

Auto blog

2014-15 Chevy Impala recalled over airbag fault

Over 5,700 current-generation Chevrolet Impala sedans are being recalled, General Motors announced today. The fullsize four-doors suffer from an issue with the front seats. According to a report from The Detroit News, a production problem during the seat steaming process could cause "a calibration error in the electronic control module." In turn, that would cause an issue with the Automatic Occupant Sensing system. The AOS is a crucial element, as it looks at the weight on the front seat to determine whether the airbags should be armed or not. According to a bulletin from the National Highway Traffic Safety Administration, a problem with the system could mean that the airbags deploy when they shouldn't, such as when there's a child or infant seat mounted in front. The problem is limited to 2014 and 2015 models that have both heated and vented front seats. Owners will be asked to report to dealers for a free recalibration and ECU reset. Scroll down for the official bulletin from NHTSA. Related Video: Report Receipt Date: JUL 24, 2015 NHTSA Campaign Number: 15V465000 Component(s): AIR BAGS Manufacturer: General Motors LLC SUMMARY: General Motors LLC (GM) is recalling certain model year 2014-2015 Chevrolet Impala vehicles manufactured April 15, 2013, to June 19, 2015, equipped with front vented-heated passenger seats. Accordingly, the Automatic Occupant Sensing (AOS) system may fail to suppress the front passenger air bag if a child seat is in the front passenger seat. These vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) No. 208, "Occupant Crash Protection." CONSEQUENCE: If the front passenger air bag deploys with a child seat in the front passenger seat, it increases the risk of injury to the child. REMEDY: GM will notify owners, and dealers will correct the calibration-learning error by preconditioning the empty seat, and also resetting the ECU to a seat zero-value, free of charge. The manufacturer has not yet provided a notification schedule. Owners may contact Chevrolet customer service at 1-800-222-1020. GM's number for this recall is 15400. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

2016 Camaro gets most revealing tease yet

Chevrolet started its long teaser campaign for the 2016 Camaro by just revealing the exhaust manifold and front frame, but as time has passed the company has slowly unveiled more. In the latest glimpse ahead of the pony car's May 16 debut, we're actually getting to see the model's profile completely undisguised. As suggested by the recent tease of the rear and hood, the 2016 Camaro wears a sharper, more angular design than the current model. This is especially the case when you look at the taut lines making up the rear. Chevy claims that the new shape underwent 350 hours of wind tunnel tests to be able to generate left lift, improve cooling and reduce wind noise in the cabin. A smooth underbody pan is among the aerodynamic tweaks, and it runs from underneath the front grille to the center of the Camaro. Chevy asserts that all of the changes at the front help reduce lift by 30 percent. Related VIdeo: 2016 Camaro is all about the Aero Total aerodynamic lift improved by 30 percent for improved stability 2015-05-11 DETROIT – After 350 hours of wind tunnel testing – often 24 hours a day – the new Camaro will slip more easily through the wind, and drivers of the Camaro SS will experience a marked improvement in reduced aerodynamic lift. These changes illustrate the lengths the aerodynamics team went to for improved performance, stability, cooling and lower wind noise intrusion "The importance of aerodynamics increases exponentially as we increase vehicle performance," said Kirk Bennion, Exterior Design manager. "As engine output increases, we need more engine cooling. As acceleration and top speeds climb, we need to reduce lift for better high-speed stability. However, we cannot make any changes at the expense of increasing drag, which can hurt fuel economy. "To balance these different aerodynamic targets, we tested literally hundreds of changes on the new Camaro, millimeters at a time." For example, the initial design called for the lower grille bars to be set at a 20-degree angle to the horizon. However, after meticulous testing, the team improved engine-cooling airflow by 1 percent by shifting the angle to 13 degrees – a change that achieved the airflow target while maintaining the original grille design. And rather than a traditional front air dam to reduce aerodynamic lift, the team developed a flush belly pan that stretches from the front grille to the center of the vehicle.

Why Cadillac thinks it needs to succeed in Europe to sell cars elsewhere

Ward's Auto has taken an interesting look at the renewed focus General Motors is showing towards Cadillac in Europe. Susan Docherty, president and managing director of Chevrolet and Cadillac in Europe (pictured), says in order for the luxury brand to thrive in China, it first needs to succeed in the old country. The reason? Chinese buyers look to Europe for cues as to what's deemed worthy of the term "luxury." There are hurdles to the plan, however. In addition to the fact that the EU is flooded with high-end nameplates, GM doesn't necessarily have the distribution network in place to put buyers behind the wheel.
Combine that with persistent economic woes and Cadillac's checkered past marred by a lack of diesel engine options and a bankrupt distributor, and the road ahead for the brand looks like less of an uphill climb and more like a straight-up cliff face. But Docherty is optimistic and says she has a plan for the brand. We recommend heading over to Ward's for a closer look at the full read.