Avalanche Duramax Diesel 2500 4x4 on 2040-cars

Auto blog

Fernando Alonso sputters in his Indy test

INDIANAPOLIS — Helio Castroneves and Fernando Alonso kept waiting around Wednesday. Now both international stars have some unfinished business to take care before qualifying for this year's Indianapolis 500. After enduring a rain delay of more than four hours then watching IndyCar regulars turn laps at Indianapolis Motor Speedway for two more hours, Castroneves and Alonso finally made it onto the track — but couldn't quite complete their refresher course. "Happy to be back here because this place is great," Alonso said after posting a fast lap of 218.690 mph — the slowest of the nine-driver evening session. "We were slow because the weather and some of the decisions people made on running time and things like that." He faced a bevy of problems in his first trip back to Indy since an impressive rookie performance in 2017. The rain delay forced organizers into rescheduling the one-day test, moving the rookie and refresher driver time from midday to the evening, cutting a significant amount of practice time for Alonso and the others. And when the green flag finally waved, Alonso's No. 66 car stalled in the warmup lane forcing the two-time Formula One champion from Spain to be towed back to pit lane where his crew worked feverishly to fix an electrical problem while sat in the cockpit. Eventually, he did get out and passed the first of two refresher phases. He'll have to wait until opening practice of the 500 on May 14 to pass the second. "It was frustrating for everyone because it was a brand new chassis and a brand new car, so we expected to run a lot," said Alonso, who drives for McLaren Racing. "If we could have had this at midday, you could work on your issues in the afternoon and then go out again." To put his day in perspective, Takuma Sato, the 2017 Indy winner from Japan, posted the fastest lap of the day at 226.993 mph and Colton Herta was the fastest rookie at 226.108. Castroneves, as usual, was good right from the start and posted a fast lap of 225.565. The three-time Indianapolis 500 winner looked smooth and fast on his favorite track and wasted no time passing the first phase. That much should have been expected from the popular Brazilian, who has recorded seven top-three finishes in 18 Indy starts and will make his season debut May 11 in the IndyCar Grand Prix. The weather and yellow flags prevented four of the five veterans — Castroneves, Alonso, Oriol Servia and JR Hildebrand — from passing phase two. Only Indy native Conor Daly made it.

GM announces $7 billion Michigan factory investment, most going to EVs

GM announced a $7 billion investment in Michigan manufacturing, much of which is earmarked for EV production. Four sites are included, but the key elements are a new battery cell plant in Lansing and the conversion of GM's existing Orion Township facility to expand production of the forthcoming Chevrolet Silverado EV and its GMC Sierra sibling.  GM says it is the largest investment announcement in company history and that it will create 4,000 new jobs. It also says 1,000 jobs will be retained. "We are building on the positive consumer response and reservations for our recent EV launches and debuts, including the GMC Hummer EV, Cadillac Lyriq, Chevrolet Equinox EV and Chevrolet Silverado EV," said GM CEO Mary Barra.  GM says the Orion expansion and new battery plant will support an increase in full-size electric truck production capacity to 600,000 units. This is in addition to the Factory ZERO facility in Detroit that will also be constructing the electric Silverado and Sierra.  The Orion Township factory current builds the Chevrolet Bolt EV and EUV, and will continue to do so during the plant's conversion. GM did not indicate what will happen with the Bolts once that conversion is complete or whether all will continue to be built at Orion. They do not use the Ultium vehicle architecture. GM will build other EV models at three other factories that are under construction or being converted. They are located in Spring Hill, Tennessee, Ingersoll, Ontario, and Ramos Arizpe, Mexico. GM says that it will have the ability to produce 1 million electric vehicles by 2025. The Ultium Cells Lansing facility is a $2.6 billion joint investment by GM and LG Energy Solution. GM says it alone will create 1,700 jobs once fully operational by late 2024. It will join two other GM Ultium Cells battery factories currently under construction in the United States, one in Ohio and the other in Tennessee.  Not all of the $7 billion investment will be for EVs. It also announced $510 million of the total will go toward upgrading the Lansing Delta Township Assembly to produce the next-generation Chevrolet Traverse and Buick Enclave. Money will also go to upgrading Lansing Grand River Assembly.

Our favorite mid-engine Corvette theories and rumors

The mid-engine Corvette! We just saw blurry photos through the foliage, and are hearts are all aflutter because it means that this car is real. And it's the most " never before" Corvette since 1984. Which leads us to all kinds of wacky theories and speculation. Everybody knows something or heard from a guy. None of those guys (or gals) from GM are talking to Autoblog, to be clear. But that won't stop us from stirring the pot. Let's go over a few point-by-point. The pushrod engine will be replaced by an overhead-cam V8 Car and Driver has repeatedly reported that an overhead-cam engine will come after the mid-engine Corvette's debut with an old-school pushrod. We've heard the same thing firsthand, albeit from a source with no connection to the development of the Corvette or powertrain. "At some point two valves can't pass future emissions regulations," said the guy we know. While the pushrod engine is compact, the design makes it difficult - if not impossible - for sophisticated variable valve timing (and lift) systems that control combustion with more precision. Hasty conclusion: The pushrod engine has a finite life in front of it. This one's a lock, it's a just a matter of when. Bowling Green's new paint shop is really the mid-engine assembly line Credit to Reddit for this one. Like we said, everybody knows a guy. But let's look deeper. The new paint facility costs $439 million dollars and adds 450,000 square feet, almost half the size of the existing plant. Plus GM announced another $290 million in upgrades at Bowling Green Assembly. That sure sounds like a lot of money, but you can actually spend that much on a paint booth. Porsche spent 500 million Euros (about $561 million dollars) to add the Macan assembly to its Leipzig, Germany plant in 2014. Chrysler shelled out $850 million for a paint shop in Sterling Heights, Michigan. GM spent $600 million for a new paint shop at the Fairfax (Kansas City) plant. Honda, on the other hand, is working on a thrifty $210 million project in Marysville, Ohio that includes a 300,000 square foot expansion, and the low-volume Acura NSX facility only cost $70 million. Hasty conclusion: The square footage and cost could easily mean a new assembly line instead of (or in addition to) a paint line. And if the NSX plant was really that cheap, GM could have hidden a similar sum in its existing announcements.