2007 Chevrolet Avalanche Lt on 2040-cars

Auto blog

General Motors and EVs: No stranger to firsts, but where's the leadership?

2015 is already shaping up to be the year of "affordable, 200-mile EV" concepts. Nissan and Tesla have each been talking about them for some time, the latter promising to unveil its Model 3 at the North American International Auto Show in January before balking when the time came. Instead, Chevrolet beat them all by unveiling the Bolt concept at the same event, followed shortly thereafter with suggestions of a 2016 launch – potentially offering the first nationwide EV with anything close to that range. It was the ballsiest EV-related move General Motors has made in a quarter century. But will it remain so? Exactly 25 years before the Bolt rolled up onto the turntable, then-Chairman Roger Smith unveiled GM's last ground-up EV concept, the even-more-unfortunately-named Impact, at the Los Angeles Auto Show in January 1990. A few months later, he surprised most of his colleagues by announcing its intended production in honor of Earth Day. It was the first modern foray into electric vehicles for the US by any automaker, one that was rewarded by the State of California with what is now known as the Zero Emissions Vehicle mandate. The program not only forced other automakers into competing with Roger's pet project, but inspired all of them to fight it like small children against bedtime. Some years later, the drivers themselves weighed in, with a biting documentary about that obstinance and the leadership it cost both GM and the country. Within months, GM was first back into the fray of plug-in vehicles. Many criticized the company for starting with a PHEV rather than jump straight back into EVs. The choice wasn't totally out of the blue – even EV1 was meant to be followed by a PHEV. And especially on the heels of Who Killed the Electric Car?, some skittishness was understandable: even a successful EV would invite a "we told you so" public reaction, underscoring their mistake in ending the EV1 program. If a new EV didn't do well, they'd be convicted in the public eye as serial killers. All while seeking a federal bailout. For all the flak, the resulting Chevy Volt was and is a better car than GM has ever gotten credit for. But the company seemed to grow weary of having to overcome its varied past, and while the current owners remain happy, much of the stakeholder and community engagement that so effectively built early goodwill and sales growth faded not long after launch. Marketing has been spotty in both consistency and effectiveness.

GM recalls select Tahoes, Yukons, Escalades for rear driveshaft issue

GM is recalling a number of its full-size SUVs due to an issue with the rear driveshaft assembly that could ultimately result in driveshaft failure. The actual number of total vehicles involved in the recall is small at just 1,789, but it’s spread out across the entire 2021 model year full-size GM vehicle lineup. That means a small number of every model is being recalled, including the Chevrolet Tahoe, Suburban, GMC Yukon, Yukon XL and the Cadillac Escalade and Escalade ESV. GM traced the issue back to certain driveshaft assemblies with ball bearings that were not properly heat treated. If theyÂ’re not properly heat treated, GM says that the balls may deform over time, causing noise and vibration. Continue to drive in this condition, and GM says the affected joint in the driveshaft assembly could seize, causing loss of drive power. However, the problem wonÂ’t present itself all at once, as GM says there will be a gradual increase of noises and vibrations before total failure. For those few owners with affected vehicles, GM says that it will replace the left and right rear driveshaft assemblies with properly-built units. Per usual with recalls, this will be done at your local dealership at no cost to the owner. If you have one of the recalled SUVs, expect to be notified mid-March. Related video:

We really want to use an eCrate to restomod an old GM car. Here's what we'd build

You hopefully saw the news today of GM's introduction of its Connect and Cruise eCrate motor and battery package, which effectively makes the Bolt's electric motor, battery pack and myriad other elements available to, ah, bolt into a different vehicle. It's the same concept as installing a gasoline-powered crate motor into a classic car, but with electricity and stuff.  This, of course, got us thinking about what we'd stuff the eCrate into. Before we got too ahead of ourselves, however, we discovered that the eCrate battery pack is literally the Bolt EV pack in not only capacity but size and shape. In other words, you need to have enough space in the vehicle to place and/or stuff roughly 60% of a Chevy Bolt's length. It's not a big car, but that's still an awful lot of real estate. There's a reason GM chose to simply plop the pack into the bed and cargo area of old full-size SUVs. Well that, and having a rear suspension beefy enough to handle about 1,000 pounds of batteries.  So after that buzz kill, we still wanted to peruse the GM back catalog for classics we'd love to see transformed into an electric restomod that might be able to swallow all that battery ... maybe ... possibly ... whatever, saws and blow torches exist for a reason.  1971 Buick Riviera Consumer Editor Jeremy Korzeniewski: If you’re going to build an electric conversion, why not do it with style? ThatÂ’s why IÂ’m choosing a 1971-1973 Buick Riviera. You know, the one with the big glass boat-tail rear end that ends in a pointy V. Being a rather large vehicle with a big sloping fastback shape, IÂ’m hoping thereÂ’s enough room in the trunk and back seat to pack in the requisite battery pack. That would likely require cutting away some of the metal bulkhead that supports the rear seatback, but not so much that a wee bit of structural bracing couldnÂ’t shore things up. The big 455-cubic-inch Buick V8 up front will obviously have to go. Remember, this was the 1970s, so despite all that displacement, the Riviera only had around 250 horsepower (depending on the year and the trim level). So the electric motorÂ’s 200 horsepower and 266 pound-feet of torque ought to work as an acceptable replacement.   1982 Chevrolet S10 Associate Editor Byron Hurd: OK, so the name "E-10" is already taken by a completely different truck, but let's not let labels get in the way of a fun idea.