One Owner, Only 1698 Miles, Premium Trim, Heated Leather, Rear Camera, Bluetooth on 2040-cars

Auto blog

NHTSA investigating nearly 750,000 GM models over non-deploying airbags

Nearly 750,000 vehicles built by Chevrolet, GMC, and Cadillac are the subject of a National Highway Traffic Safety Administration (NHTSA) investigation due to non-deploying driver-side airbags. While the investigation is ongoing, the agency believes the issue is likely due to rust particles that form on the inflator's connection terminal interface. The list of nameplates included in the investigation includes Chevrolet's Silverado, Tahoe, and Suburban, GMC's Sierra, Yukon, and Yukon XL, plus Cadillac's Escalade, Escalade ESV, CT4, CT5, and XT4. All of the potentially affected vehicles are 2020 or 2021 models, according to a bulletin published on the NHTSA's website. Investigators launched the probe in April 2021 after 15 consumers reported airbag-related issues, including nine who said an airbag malfunction light appeared in the instrument cluster. More alarmingly, the NHTSA is aware of six accidents that caused significant damage to the car's front end yet didn't trigger the driver's airbag. It adds that there are no fatalities linked to the issue, but there are six crashes and eight injuries reportedly blamed on it. No evidence suggests this problem is related to the millions of potentially deadly Takata inflators recalled over the past few years. General Motors is aware of the defect. It sent a technical service bulletin (TSB) to its dealers in March 2021 to address the aforementioned warning light. The note explains the issue is due to "rust particles in the connection terminal interface of the driver's airbag inflator." The company hasn't issued a safety recall yet, however. Whether it will partially depends on the NHTSA's findings. It's currently looking into the scope and the severity of the problem, and it wants to understand its implications on driver safety. Investigators will decide whether General Motors needs to recall the 749,312 cars that are part of the probe when they close their investigation. General Motors has already spent a significant amount of money replacing defective airbag-related parts in its cars. In November 2020, it was ordered by the American government to recall nearly 6 million pickup trucks and SUVs equipped with potentially dangerous Takata airbag inflators. It repeatedly argued that testing proved the inflators were safe, and it petitioned the agency four times starting in 2016 to avoid a recall, which cost an estimated $1.2 billion (about a third of its net income in 2020).

GM adds 1,200 jobs at Detroit-Hamtramck plant

General Motors is making a big move at its Hamtramck, MI, factory, announcing it will add a second shift and hire over 1,200 workers within the next several months. It's expected that by early 2016, the factory will employ over 2,800 workers to build the Chevrolet Volt, Impala, Malibu, Cadillac ELR, and by early next year, the new CT6. According to GM Hamtramck spokesperson Courtney Zemke, 40 of the 1,200 positions are for salaried employees, while the remainder will be hourly positions. As for where these employees will go, positions are being made available across the factory, so GM isn't focusing on any particular area for its new hires. It's a similar story behind the hiring surge itself. GM said in its press release that the "second shift is necessary to meet forecasted market demand," a position Zemke reiterated. It's a matter of demand across the plant's portfolio, rather than any one particular product seriously outstripping supply. Naturally, the United Auto Workers is happy with the move. "The workforce at Detroit-Hamtramck is second to none," UAW Local 22 Shop Chairman Don LaForest said in the attached release. "We appreciate the opportunity to expand our UAW-GM family." Hiring is going on now, with the second shift slated to get underway in early 2016. GM's Detroit-Hamtramck Assembly to Add Second Shift and More Than 1,200 Jobs Plant will nearly double its workforce by early 2016 2015-10-22 DETROIT – General Motors is nearly doubling its workforce at Detroit-Hamtramck Assembly by adding a second shift and more than 1,200 hourly and salaried jobs. The addition of a second shift will increase the plant's workforce to approximately 2,800 people when hiring is completed. The second shift is necessary to meet forecasted market demand for the five cars produced at Detroit-Hamtramck. "This is the result of the award-winning vehicles Detroit-Hamtramck produces and the confidence GM has in our team to build world-class quality for our customers," said Plant Manager Gary West. Second shift hiring is underway, and the shift is scheduled to begin operations in early 2016. "The workforce at Detroit-Hamtramck is second to none," said UAW Local 22 Shop Chairman Don LaForest. "We appreciate the opportunity to expand our UAW-GM family." The 4.1 million-square-foot Detroit-Hamtramck Assembly opened in 1985. GM has invested $1 billion in the plant over the last six years, making it one of the company's most-agile manufacturing facilities in North America.

2015 Chevrolet Silverado Custom glitzes up volume model [UPDATE]

UPDATE: The original prices listed in Chevrolet's press release did include destination charging, despite not being specifically called out as such. We've edited the story to reflect this. The Chicago Auto Show's reputation as the home of special edition debuts grows stronger today, as Chevrolet is complementing the news that it'd unveil the Silverado Midnight Edtion and Colorado GearOn special editions in the Windy City with the debut of the Silverado Custom. And yes, it's different than the higher-spec Custom Sport that debuted just last month in Detroit. What's so custom about the Silverado Custom, you ask? Well, not a whole lot. The new truck is based on the popular Silverado LS Double Cab, and adds, among its most noteworthy features, a set of 20-inch, five-spoke wheels. From there, chrome is the order of the day, with shinier front and rear bumpers, mirror caps and door handles. The top portion of the front bumper, which is finished in black plastic on the standard LS, is matched to the body color on the Custom model. Standard LS interior features, like the 4.2-inch MyLink system with 4G LTE wireless internet, 40/20/40 cloth front seats, remain in place on the Custom, while it's a similar story with the powertrain. Choices below the sheetmetal will force buyers to choose between a 5.3-liter V8 or a standard 4.3-liter V6, and two- or four-wheel drive. Chevy is pricing a V8-equipped Silverado Custom 4x2 at $33,820 (including $1,195 in destination charges). Adding four-wheel drive brings the price up at $37,800, although as we said, selecting the 4.3-liter V6 will yield a more affordable Custom. Check out the full press release on the newest member of the Silverado clan, available below. 2015 Silverado Custom: Back to Basics, with Style $33,820 starting price for a well-equipped double-cab V-8 CHICAGO – Chevrolet takes aim at the heart of the pickup market with the Silverado Custom, which offers Chevy Truck capability and dependability in a stylish package, priced within reach of many truck customers. "The economic recovery has led to booming sales of high-end pickups like the Silverado High Country," said Sandor Piszar, marketing director for Chevy Trucks. "But there are also millions of customers in the heart of the market who want a great looking, well-equipped truck at an affordable price.