2004 Chevrolet Venture Ls Mini Passenger Van 4-door 3.4l No Reserve on 2040-cars

Auto blog

2020 Chevrolet Tahoe, Suburban and GMC Yukon all spied with production lights

One of our spy photographers just caught a smattering of full-size GM SUVs out testing, including the Chevrolet Tahoe, Suburban and GMC Yukon. Previous spy photos of the next-generation of these big GM SUVs have revealed that GM is going with an independent rear suspension design, and these shots confirm the news once again with our best look at the hardware yet. Check them out from the rear, lined up like ducks in a row to see the beefy control arms down there. This will undoubtedly give the big SUVs a more compliant ride, and should bring it back into touch with the refinement from the Ford Expedition and Lincoln Navigator. The new bits we get to see with these shots are production headlights and taillights that are shaping up to look pretty neat. Most distinguishable are the GMC Yukon's LED DRLs. These look a lot like the C-shaped LEDs outlining the headlights on the Sierra, but they have an extra LED strip on top of the C. The parts of the taillights that we can see look significantly different than that found on the Sierra, showing GM is planning on having a great deal of differentiation there. We can sort of see through the mesh covering the grille to what appears to be a classic horizontal bar style front opening. Chevy is predictably dialing the crazy LED strip design back for the Tahoe and Suburban. The parts that are lit up look a whole lot like the headlight fixtures on the 2019 Silverado. That truck uses a stack of lights with the actual headlights separated from the DRLs. We can see the same thing going on here, with the headlight up top and curved LED DRL strip sitting below. It's tough to say if the designs are exactly alike, but we expect to see an extremely Silverado-esque look once all the camouflage comes off. Chevrolet's taillight design differs from its donor truck like the GMC, showing off a curved, vertical series of LEDs out back. Once production lights start popping up like this, we know the vehicle is moving closer to its end game. A reveal sometime later this year could be in the cards for GM's next batch of full-size SUVs. It certainly needs them quick, as Ford rockets ahead with increased Expedition production announced earlier this week.

2016 Chevy SS gets new face, clears throat

Chevy is tweaking the SS once again for the 2016 model year. While the changes might be minor, muscle sedan enthusiasts shouldn't need any more excuse to love the Bowtie brand's performance sedan. The 2016 Chevy SS benefits from revised front-end styling that incorporates new vertical ducts designed to direct airflow over the front wheel wells. It also gets new LED lighting and new functional hood vents to make it look even more aggressive than the current model. Although the 6.2-liter V8 carries over unchanged from the existing version – churning out 415 horsepower and an equal amount of torque – a new dual-mode exhaust promises to be both quieter at lower speeds and angrier-sounding at higher revs. And of course you can still get it with a six-speed manual or automatic transmission. In any event, it should also look the business with its new 19-inch alloys as well. Related Video: 2016 Chevrolet SS Designed for Performance DETROIT – Building on the performance-oriented updates made to the Chevrolet SS last year, the 2016 model features several exterior enhancements that reinforce its presence on the road. A revised front fascia features new, vertical ducts at the outer edges to direct airflow over the front wheel openings to improve aerodynamic efficiency. The fascia also incorporates new LED signature lighting, while new, functional hood vents and new-design 19-inch cast-aluminum wheels contribute to a stronger appearance for the rear-drive sports sedan. "The 2016 SS design changes more fully express the true driving character of the sedan while further enhancing the car's overall performance," said Todd Christensen, Chevrolet Performance Car marketing manager. What hasn't changed is the SS's unique blend of performance, comfort and spaciousness. It features a 6.2L V-8 engine under the hood and turns out an SAE-certified 415 horsepower (310 kW) and 415 lb-ft of torque (563 Nm), and offers a six-speed manual transmission or a paddle-shift six-speed automatic transmission. A new, dual-mode exhaust system for 2016 complements the V-8 engine with quieter performance at low engine speeds and a more muscular engine note at wide-open throttle.

GM's labor deal with UAW union on verge of ratification

Nov 15 (Reuters) - General Motors' tentative labor deal with the United Auto Workers (UAW) union closed in on ratification as the votes were counted on Wednesday. Following the approval earlier in the day by more than 60% of union members at the Detroit automaker's large Arlington, Texas, assembly plant, additional votes in favor have the deal close to clinching majority approval. The number of union locals, most of which are smaller, still to report vote totals is not large. After several large assembly plants voted against the deal earlier on Wednesday, some media had reported the deal was heading toward failure. But Arlington's support, followed by strong voting in favor by smaller warehouse and parts facilities, has put the deal on the brink of approval. This would mark the first ratification of a deal, which runs through April 2028, with one of the Detroit Three automakers. Ford and Stellantis voting is still under way, and workers at both companies were favoring ratification by comfortable margins. The UAW's GM vote tracking site currently shows approval of the contract leading by a 54% to 46% margin with almost 32,000 workers having cast votes out of about 46,000 UAW-represented GM workers. The Arlington plant, with about 5,000 UAW members, has the most of any GM plant. Voting officially ends on Thursday at 4 p.m. EST, although most votes will be cast on Wednesday. The UAW went on strike for more than six weeks against the Detroit Three, seeking better wages, working conditions and cost-of-living adjustments. All three companies agreed to tentative agreements about two weeks ago. Workers at other GM assembly plants voted against the deal, including 60% of workers at its Fort Wayne, Indiana, truck plant, 53% at its Wentzville, Missouri, plant, 58% of workers at GM's Lansing Grand River plant and 61% of workers at the Lansing Delta Township plant. Seven of GM's 11 assembly plants rejected the deal. In addition to Arlington, workers at plants in Detroit, Fairfax, Kansas; and Lake Orion, Michigan; approved the agreement. Only nine facilities are still listed without vote totals on the UAW vote tracker, including GM's Lockport, New York, components plant with about 1,200 members. Those voting in favor of the agreement have a lead of almost 2,500 and many of the facilities still to come include workers who stand to receive large pay increases upon ratification.