Fwd 4dr Lt W/2lt Chevrolet Traverse Lt W/2lt Suv Automatic Gasoline Engine, 3.6l on 2040-cars

Auto blog

AEV-upgraded GMC Canyon AT4X, Chevy Colorado ZR2 appear in spy photos

As with the previous generation, it appears the 2023 Chevy Colorado ZR2 will be getting a special AEV version. Not only that, but its twin, the GMC Canyon AT4X will get one, too. And as these spy photos show, they'll have some additional off-road accessories included, as well as bigger tires. We'll start with the GMC Canyon. The first example of the truck without any camouflage is not quite fully upgraded like the camouflage vehicles. But it has one part not seen on the others: the AEV snorkel. 2023 Chevy Colorado ZR2 AEV Bison prototype View 13 Photos The two appear to be riding on larger Goodyear Wrangler Terrain MT tires. These look like 35-inch examples -- 2 inches larger than the biggest tires available on the ZR2 and AT4X. They're also mounted on beadlock capable wheels. Besides the bigger tires, both trucks also feature a new bed-mounted spare tire. It's a full-size spare, and unlike past bed-mounts, this one places the tire flush against the cab. The benefit of moving the spare to the bed is departure angle. And while this position looks a little less like how trophy trucks carry their spares, it should provide better cargo space. Rear visibility probably isn't great, though. Generalizing based on what we know about the current ZR2 Bison, the new AEV trucks will probably get unique grilles, steel bumpers, fender flares, a suspension lift and possibly even axle ratio changes. Additional options such as a winch could be offered, too. We expect the trucks will be revealed within the next year, since the base trucks have already been shown, and these are just upgraded versions of those trucks. Related Video: 2023 Chevrolet Colorado walkaround

2016 Camaro gets most revealing tease yet

Chevrolet started its long teaser campaign for the 2016 Camaro by just revealing the exhaust manifold and front frame, but as time has passed the company has slowly unveiled more. In the latest glimpse ahead of the pony car's May 16 debut, we're actually getting to see the model's profile completely undisguised. As suggested by the recent tease of the rear and hood, the 2016 Camaro wears a sharper, more angular design than the current model. This is especially the case when you look at the taut lines making up the rear. Chevy claims that the new shape underwent 350 hours of wind tunnel tests to be able to generate left lift, improve cooling and reduce wind noise in the cabin. A smooth underbody pan is among the aerodynamic tweaks, and it runs from underneath the front grille to the center of the Camaro. Chevy asserts that all of the changes at the front help reduce lift by 30 percent. Related VIdeo: 2016 Camaro is all about the Aero Total aerodynamic lift improved by 30 percent for improved stability 2015-05-11 DETROIT – After 350 hours of wind tunnel testing – often 24 hours a day – the new Camaro will slip more easily through the wind, and drivers of the Camaro SS will experience a marked improvement in reduced aerodynamic lift. These changes illustrate the lengths the aerodynamics team went to for improved performance, stability, cooling and lower wind noise intrusion "The importance of aerodynamics increases exponentially as we increase vehicle performance," said Kirk Bennion, Exterior Design manager. "As engine output increases, we need more engine cooling. As acceleration and top speeds climb, we need to reduce lift for better high-speed stability. However, we cannot make any changes at the expense of increasing drag, which can hurt fuel economy. "To balance these different aerodynamic targets, we tested literally hundreds of changes on the new Camaro, millimeters at a time." For example, the initial design called for the lower grille bars to be set at a 20-degree angle to the horizon. However, after meticulous testing, the team improved engine-cooling airflow by 1 percent by shifting the angle to 13 degrees – a change that achieved the airflow target while maintaining the original grille design. And rather than a traditional front air dam to reduce aerodynamic lift, the team developed a flush belly pan that stretches from the front grille to the center of the vehicle.

GM uses wind power to build SUVs, trucks

This week started with a chill, as the Intergovernmental Panel on Climate Change issued a dire report with scientists warning, "The world we know today is not the world we will see in 50 years," with temperatures rising at their current rates. In the meantime, the trend toward purchasing more SUVs and crossovers continues. Most automakers, though, have set goals toward more sustainable production. That includes General Motors, which, somewhat ironically, plans to use wind power to produce many of its vehicles, including pickups and full-size SUVs. As the Detroit Free Press reports, several wind farms are coming online to support cleaner production as part of a partnership between GM and energy producer CMS Enterprises. At the beginning of October, the 100-megawatt Northwest Ohio Wind Farm began producing energy, supplying GM operations in Ohio and Indiana, where manufactured vehicles include the Chevy Cruze, Chevy Silverado and GMC Sierra. Hilltopper Wind Farm in Illinois will begin producing another 100 megawatts for GM manufacturing in the region. In Texas, where GM builds the Chevrolet Tahoe, Chevrolet Suburban, GMC Yukon, GMC Yukon XL and Cadillac Escalade, the automaker is getting 50 megawatts from Cactus Flats Wind Farm beginning October 9. Using wind power isn't just about being green, but also for the sake of price stability. As Rob Threlkeld, GM's global manager of renewable energy told the Free Press, "You don't get the price spikes this way, like you do with fuel, and it reduces the environment footprint of the vehicle you're driving." Threlkeld said that renewable energy has already meant "millions of dollars in savings" for GM. GM plans to power all of its global operations with renewable energy by 2050. This week, the automaker was ranked 76 on the EPA's "National Top 100 List" of green manufacturers. It was the only automotive company listed. Related Video: News Source: Detroit Free Press, GM, EPAImage Credit: GM Green Plants/Manufacturing Chevrolet GM GMC Truck SUV wind power sustainability