2004 Chevrolet Trailblazer Ext Lt on 2040-cars

Auto blog

Want a V8 on the cheap? Buy a work truck

In case you didn't notice, V8 cars have gotten pretty expensive. If you want a modern muscle car like the Dodge Challenger R/T, Ford Mustang GT, or Chevy Camaro SS, you'll need between $34,000 and $38,000 for a stripped out example of one. The cheapest of those is the Challenger, and the priciest is the Camaro. These are also the cheapest V8 cars the companies offer. But if you absolutely have to have a V8 for less, there is an option, work trucks. As it turns out, all of the Big Three offer their most basic work trucks with V8s. And because they're so basic, they're pretty affordable, especially when sticking with the standard two-wheel drive. A Ram 1500 Tradesman with a V8 can be had for as little as $29,840, which is a little more than $4,000 less than a Challenger R/T. For a bit more at $30,275, you can have a Chevy Silverado W/T, almost $8,000 less than a Camaro SS. The most expensive is the V8 Ford F-150 starts at a starting price of $30,670, which is a bit over $5,000 less than the Mustang. Of course you'll be in an ultra bare bones vehicle with few comforts, and the price will go up if you add stuff, but we're bargain hunting here, and sacrifices are sometimes necessary. Besides, what you lose in comfort, you gain in loads of cargo space and towing (try to look at the bright side). Also, as a side note, all three trucks are available with optional electronic locking rear differentials. At the discounted price of these trucks, you still get a heaping helping of power. The most potent of the trio is the Ram 1500 Tradesman with 395 horsepower and 410 pound-feet of torque generated by a 5.7-liter V8. Compared with the Challenger R/T, the Ram is up by 20 horsepower and they're tied for torque. The value proposition is even more stark between the two vehicles when looking at the price per horsepower. Each pony in the Ram costs $75.54, while the Challenger charges you $90.91. The Challenger is also more expensive per horsepower than its close competitors. The F-150's 5.0-liter V8 is just barely behind the Ram with 395 horsepower and 400 pound-feet of torque. That's still more power than the Challenger, and it matches the torque of the 2017 Mustang GT. On the down side, it still would be down 20 horsepower on that same 2017 Mustang, and it's behind by 60 horsepower and 20 pound-feet on the new 2018 Mustang GT. The F-150 also just edges out the Mustang in the dollar per horsepower measure.

2016 Chevrolet Camaro: Notes from the reveal

The 2016 Chevrolet Camaro debuted Saturday evening in Detroit at an enthusiast-oriented event near the city's IndyCar course. While the big news was the Camaro's 200-pound weight loss, tighter chassis, and a snorting new V8, plenty of other morsels of Camaro info came out. Here's some of the more interesting stuff we heard. • The 2.0-liter inline four-cylinder is the first turbocharged engine in a Camaro. • The LT1 borrowed from the Corvette Stingray marks the third time a Camaro has used an engine with that badge. It was previously used in 1970-72 (Z/28), 1993-97 (Z/28), and 1996-97 (SS). • The Camaro was revealed in a tent before nearly 1,000 enthusiasts, General Motors executives (including CEO Mary Barra) and mere feet from the Grand Prix course where IndyCars will run in two weeks. • Chevy hopes to continue to attract new customers with the Camaro and said 63 percent of the fifth-generation buyers were new to the brand. • GM product boss Mark Reuss neatly summed up the Camaro's handling character. "It's wicked fast and extremely nimble." • Reuss on the design goal: make it "look like a car for tomorrow instead of a car from yesterday." • Reuss' first car was a 1967 Camaro, and he's reiterated his passion for the car. "People want to be seen in a Camaro, and that never goes away." • Chevy North America president Alan Batey said he plans to line up a red Camaro as soon as the order bank opens. We assume he'll have early access to that. • Though the appearance is similar, the sixth generation of the Camaro appears a little sleeker and is more aerodynamic thanks to 350 hours in the wind tunnel. Only two parts, the SS badge and the rear bow-tie emblem, are carryover. • Al Oppenheiser, the Camaro's chief engineer, said most of the options (except Magnetic Ride Control, which is SS exclusive), will be offered on the inline four. The engine will be capable of propelling the Camaro to a sprint to 60 miles per hour in well under six seconds. "We don't want to ... make it feel like an excuse car," he said. • Without revealing specifics, Oppenheiser said every Camaro variant will be faster than the model it replaces. •The interior is vastly improved. We got an up-close look in the cabin of one of the cars revealed with a red and white layout, and the materials are much better. The setting is more colorful, and 24 different ambient lighting shades are available. Related Video:

Meet the mother-daughter team that's worked on almost every Chevy Volt

It's Mother's Day, and we're soft enough we love our mothers enough to share a new video from General Motors with you. In it, we meet Monique Watson (left) and Evetta Osbourne, a mother-daughter team that works at the Detroit-Hamtramck Assembly where GM makes the Chevy Volt (along with all of GM's other plug-in hybrids: the Opel Ampera, Holden Volt and Cadillac ELR). The two work side-by-side and have installed the lithium-ion battery pack on almost all of those vehicles - nearly 80,000 of them - since GM started making the pre-production Volts in 2009. In a prepared statement, Watson said that she likes working next to her mom, day in and day out, and they the two are totally in sync when it comes to putting the 400-pound, 16.5-kWh packs into the vehicle undersides. They two can also share stories throughout the day, and Watson said, "The arrangement has absolutely improved our relationship." Osborne started working at Detroit-Hamtramck in 1999, Watson since 2006. If you're driving a Volt today, you probably have them to thank for doing a bit of the work putting your car together. See a short video of them in action below. It's Always Mother's Day for Detroit-Hamtramck Duo Mother, daughter install lithium-ion battery pack in nearly all GM electric vehicles 2014-05-08 DETROIT – For Detroit resident Evetta Osborne, every day is Mother's Day. That's because she literally works side by side with her daughter, Monique Watson, at General Motors' Detroit-Hamtramck assembly plant. They have installed the lithium-ion battery pack on nearly every Chevrolet Volt, Opel Ampera, Holden Volt, and Cadillac ELR since production began. In fact, apart from vacation days and an occasional sick day, the mother-daughter duo has installed almost every battery pack since the Volt was in pre-production in 2009. The ELR launched earlier this year. All told – including Ampera – that's more than 80,000 electric vehicles. "We're a good team and our relationship is secondary when it comes to performing our jobs – but it's great to work alongside my daughter, said Osborne, a mother of five. Because the battery packs weigh more than 400 pounds each, automatic guided vehicles – robotic carts that use sensors to follow a path through the plant – deliver them just as the vehicle body structures glide into position overhead. The carts then lift the T-shaped packs, and Osborne and Watson guide them into the chassis and secure each one with 24 fasteners.