Chevrolet Tahoe Lt Sport Utility 4-door on 2040-cars

Auto blog

2016 Chevrolet Spark lights up New York

The little Spark has been somewhat of a surprising entry in the modern Chevy lineup in the US. Given its diminutive stature, you might have expected the slightly larger Sonic to cannibalize the tiny sibling's sales, but that hasn't happened. The Bowtie moved 39,159 Sparks in the US in 2014, a 14.7 percent boost from the previous year. Now at the 2015 New York Auto Show, the latest generation is being unveiled with a new engine and much improved styling. Replacing the current 1.2-liter four-cylinder is an all-aluminum 1.4-liter unit making 98 horsepower. That still doesn't sound like much, but it's 16 percent more than the 2015 Spark. The new mill can be connected to either a five-speed manual or a continuously variable transmission with which Chevy estimates 40 miles per gallon highway fuel economy. The 2016 Spark also gets a longer wheelbase and 1.6-inch lower overall height. Combined with more elliptical headlights at the front, the changes make for a somewhat more sleek appearance than the current, boxy model. The platform underneath is more rigid as well, and Chevy claims the latest underpinnings mean better handling and lower NHV levels inside. The little hatch isn't growing up too much, though, and gets a trio of new colors that sound like jellybean flavors: Toasted Marshmallow, Kalamata and Splash. Chevy is packing the interior with better quality materials and improved tech. Chevy's latest seven-inch MyLink system sits in the center stack with a capacitive touchscreen, and it now comes with a physical volume control and other buttons for easier use. All models also get a rearview camera, and a LCD instrument cluster remains in front of the driver. The available suite of safety systems includes Forward Collision Alert, Lane Departure Warning and Side Blind Spot Alert. The 2016 Spark goes on sale in the US in the fourth quarter of 2015 and is produced in South Korea. Expect a gallery showing off all its new styling from the New York show floor soon.

Camaro spy shots show subtly different grille, front fascia

It looks like there some changes in store for the Chevrolet Camaro - the only thing is that we just don't know what Chevy has up its sleeve. Looking at these spy shots, we'd initially be inclined to think that there is just a minor facelift or a new special edition, but upon closer inspection, there are a few oddities about this car that definitely have us intrigued.
The most obvious difference on this prototype is the slightly restyled front fascia with a smaller lower air inlet and the two-bar grille. Then we get to some of the car's mysterious details. For starters, this fascia has the SS vent above the grille, but it looks to be blocked off. Granted this could just be a one-off piece used for testing. What really piqued our interest was at the rear of the car where it has quad exhaust outlets that are used on the ZL1. Could this be the LS7-powered Camaro that we reported on back in December?
At this point, your guess is as good as ours as to what we're looking at here, so let us know in the comments what you think this could be.

GM to build next-gen Chevy Cruze in Mexico

As one of its global products, General Motors builds the Chevy Cruze for local consumption at assembly plants around the world: in Australia, South Korea, Vietnam, Thailand, China, India, Kazakhstan, Russia, Brazil and Ohio. The automaker is expected to trim those locations for the next generation of its compact sedan, but its latest announcement has it adding a new site to the list: Mexico. As part of a $350-million investment, GM's plant at Ramos Arizpe in Coahuila will gear up for production as one of several sites that will be charged with building the next-gen Cruze. The General has yet to announce just which plants those will be, but it has confirmed that the Lordstown, Ohio, site will once again be among them. The plant in St Petersburg, Russia, which has produced the current Cruze, is being shut down, as is the Holden plant in Elizabeth, Australia. The Ramos Arizpe assembly plant currently puts together the Chevy Sonic and Captiva as well as the Cadillac SRX, but has over the course of its 34-year history handled a variety of models for the Chevy, Pontiac, Buick, Cadillac, Saturn, Opel and even Saab brands. The site handles a quarter of GM's production in Mexico, and exports 87 percent of its capacity to other markets. Invertira GM 350 mdd en Ramos Arizpe para fabricar siguiente generacion de Chevrolet Cruze 2015-03-23 - Se consolida GM de Mexico como el sexto productor global de vehiculos para General Motors Company Ramos Arizpe, Coahuila - General Motors de Mexico anuncio este dia que invertira 350 millones de dolares en su Complejo de Manufactura Ramos Arizpe, para fabricar en estas instalaciones la siguiente generacion del modelo Chevrolet Cruze. "Esta inversion, que forma parte de los 5 mil millones de dolares anunciados en diciembre pasado para todo el pais, fortalecera la presencia de GM Ramos Arizpe en la produccion de nuestra compania a nivel mundial y, por supuesto, consolidara a Mexico como el sexto productor de automoviles para GM Company, con el 7% de la produccion global", informo Ernesto M. Hernandez, Presidente y Director General de GM de Mexico. En una reunion de trabajo en la que participaron Ruben Moreira, Gobernador del Estado de Coahuila y Rogelio Garza, Subsecretario de Industria y Comercio del Gobierno Federal, el Presidente de General Motors en el pais aseguro que el Complejo GM Ramos Arizpe se ha consolidado como un iman para las inversiones de la compania a nivel global. Adicionalmente, Ernesto M.