2014 Chevrolet Tahoe Lt on 2040-cars

Auto blog

2.0-liter turbo four reportedly returning to Chevrolet Equinox line-up for 2022

Chevrolet's popular Equinox crossover will enter the 2021 model year with comprehensive updates and a turbocharged, 1.5-liter four-cylinder as its only available engine. The 2.0-liter turbo four offered through 2020 is allegedly leaving the line-up, but it will be replaced for 2022 with a newer engine that produces slightly less power while returning better fuel economy, according to a recent report. Called LSY internally, the new 2.0-liter turbo four already powers the Cadillac XT4, among other models in the General Motors portfolio. Enthusiast website GM Authority learned it will deliver 237 horsepower at 5,000 rpm and 258 pound-feet of torque from 1,500 to 4,000 rpm. For context, the 2.0-liter available through 2020 (known as LTG) made 252 horses and 260 pound-feet of twist, and the 1.5-liter posts figures of 170 and 203, respectively. As a trade-off for the slight drop in horsepower and torque, the LSY is smoother, quieter and cleaner than the LTG it replaces. Transmission options remain unconfirmed, but the four-cylinder will likely shift through a nine-speed automatic. Front-wheel drive will come standard, and all-wheel drive will be offered at an extra cost. Chevrolet hasn't commented on the report; it hasn't even confirmed the Equinox is losing the LTG engine for 2021. If the rumor is accurate, details about the 2022 Equinox should be released during the first half of 2021. GM Authority added the GMC Terrain, which is closely related to the Equinox, will receive the new engine for 2022 as well. Both should have gotten it for 2021, but the on-going global pandemic delayed its launch. Related Video:

Is the skill of rev matching being lost to computers?

If the ability to drive a vehicle equipped with a manual gearbox is becoming a lost art, then the skill of being able to match revs on downshifts is the stuff they would teach at the automotive equivalent of the Shaolin Temple. The usefulness of rev matching in street driving is limited most of the time – aside from sounding cool and impressing your friends. But out on a race track or the occasional fast, windy road, its benefits are abundantly clear. While in motion, the engine speed and wheel speed of a vehicle with a manual transmission are kept in sync when the clutch is engaged (i.e. when the clutch pedal is not being pressed down). However, when changing gear, that mechanical link is severed briefly, and the synchronization between the motor and wheels is broken. When upshifting during acceleration, this isn't much of an issue, as there's typically not a huge disparity between engine speed and wheel speed as a car accelerates. Rev-matching downshifts is the stuff they would teach at the automotive equivalent of the Shaolin Temple. But when slowing down and downshifting – as you might do when approaching a corner at a high rate of speed – that gap of time caused by the disengagement of the clutch from the engine causes the revs to drop. Without bringing up the revs somehow to help the engine speed match the wheel speed in the gear you're about to use, you'll typically get a sudden jolt when re-engaging the clutch as physics brings everything back into sync. That jolt can be a big problem when you're moving along swiftly, causing instability or even a loss of traction, particularly in rear-wheel-drive cars. So the point of rev matching is to blip the throttle simultaneously as you downshift gears in order to bring the engine speed to a closer match with the wheel speed before you re-engage the clutch in that lower gear, in turn providing a much smoother downshift. When braking is thrown in, you get heel-toe downshifting, which involves some dexterity to use all three pedals at the same time with just two feet – clutch in, slow the car while revving, clutch out. However, even if you're aware of heel-toe technique and the basic elements of how to perform a rev match, perfecting it to the point of making it useful can be difficult.

Anti-purist 1963 Ferrari GTE sports hot rod Chevy V8

I remember reading a story around the time Fast and Furious: Tokyo Drift came out. It focused on one of the star cars of that film, a 1967 Ford Mustang fastback that started the film as a shell, and in a pinch, was transformed into a modified masterpiece, complete with the RB26DETT engine from a Nissan Skyline GT-R (which started the film under the hood of an S15 Silvia). There was a genuine (and in our minds, absurd) fear in the article that taking a piece of classic American iron and fitting a twin-turbocharged JDM engine would result in some awful trend in the classic car community. If you thought a GT-R-powered classic Mustang was sacrilege, though, this car will probably make you vomit. For the rest of us, it's a neat piece of engineering. Shown above is a 1963 Ferrari 250 GTE, and yes, that's a 302-cubic-inch, small-block Chevrolet V8 under the hood. On top of that, it uses the six-speed manual transmission from a Viper, a nine-inch Ford rear end, and Mitsubishi-sourced paint. So yeah, it's a FrankenFerrari. Check out Road Heads' interview with this custom GTE's owner, which is followed by a brief test drive. And of course, head into Comments afterwards, and let us know what you think. Is this Yankee-powered 250 GTE blasphemous or badass?