Luxury Loaded - Sunroof - Low Miles! on 2040-cars

Auto blog

Camaro spy shots show subtly different grille, front fascia

It looks like there some changes in store for the Chevrolet Camaro - the only thing is that we just don't know what Chevy has up its sleeve. Looking at these spy shots, we'd initially be inclined to think that there is just a minor facelift or a new special edition, but upon closer inspection, there are a few oddities about this car that definitely have us intrigued.
The most obvious difference on this prototype is the slightly restyled front fascia with a smaller lower air inlet and the two-bar grille. Then we get to some of the car's mysterious details. For starters, this fascia has the SS vent above the grille, but it looks to be blocked off. Granted this could just be a one-off piece used for testing. What really piqued our interest was at the rear of the car where it has quad exhaust outlets that are used on the ZL1. Could this be the LS7-powered Camaro that we reported on back in December?
At this point, your guess is as good as ours as to what we're looking at here, so let us know in the comments what you think this could be.

Meet Alex Archer, the engineer behind GM's power-sliding center console

In 2009, a GM manager complained to a 59-year-old GM technician about the hassle of retrieving items from a pickup truck bed after driving shifted the cargo. In two days, the tech had come up with the ideas that, ten years later, would debut as the MultiPro tailgate. The engineering teams kept the tailgate secret in part by hiding mock-ups in a locked storage closet in GM's Vehicle Engineering Center in Warren Michigan for two years. A piece in the Detroit Free Press reveals that another storage closet in Warren would play the same role in a different cloak-and-dagger operation, this time for the power-sliding center console in GM's new full-sized SUVs. During a meeting in early 2017, bosses gave the job of the console's creation to 24-year-old design release engineer Alex Archer, just two years out of Stanford University with a degree in engineering and product design.  This time, the catalyst for the feature was an internal GM think tank called co:lab, where employees suggest ideas. Execs gave Archer the task because "They needed someone willing to ask a lot of questions," her 36-month mandate to produce a six-way console that could be a standard cubby or a gaping maw able to swallow four gallon jugs or hide a secret compartment. Clearly, she succeeded. It took Archer and the team nine months to devise a prototype, another six months to get the green light for production. As with the tailgate, the team working on the console grew to include designers, production engineers, and suppliers. Archer, now 26, shepherded the process, and her name is on the patent. "It took a ton of people, I'm just somebody who stuck with it the whole time," she said. GM like her work well enough to produce the "Day in the Life" segment above, five months before the world would hear about the console. Archer's path to engineering was as unlikely as getting the job for the console. She had entered Stanford with plans to be a doctor. But an innovation class during her freshman year, and a sophomore summer spent helping her grandfather rebuild a 1937 MG engine recharted her course. Her grandfather told her, "You know, you could be an engineer for a car company." Consumer reaction to Archer's work won't be far off, the SUVs slated to hit dealerships soon. Meanwhile, she's busy on something that could be just as intense as the console: Restoring a 1955 Packard Clipper in her garage. Head to Freep to check out the story of Archer and the console. Related Video:

2017 Chevy Corvette Grand Sport spotters guide

The 2017 Corvette Grand Sport is a mix of regular Stingray and steroidal Z06. Unveiled at the 2016 Geneva Motor Show, this tweener 'Vette will go on sale this summer. If you need a refresher, click here for the details and official press release. We sat down with Chief Engineer Tadge Juecter in Switzerland to explain the differences between the Grand Sport and the rest of the Corvette lineup. <p>Your browser does not support iframes.</p> Stingray Hood The Grand Sport comes with the LT1 V8 (and 460 horsepower) instead of the supercharged LT4 in the Z06. That means the Grand Sport gets the lower Stingray hood, absent the power bulge. The Grand Sport also weighs less than the Z06. As such, the Grand Sport's springs and anti-roll bars are different to accommodate the lighter nose. "Mainly it's the weight distribution that changes," explains Juecter, "It's a custom tune around the obvious standard components." Grand Sport Wheels, Z06 Brakes In the sixth-generation Corvette, the Grand Sport came with a Z06-style body but kept the standard Vette's steel structure. With every version of the C7 built on an aluminum backbone, the Grand Sport has almost the same structure as the Z06. That means the Grand Sport can handle all the track-ready goodness like Z06 brakes and the optional Z07 package that adds carbon-ceramic disks and Michelin Pilot Sport 2 Cup tires. Except the Grand Sport comes without the max-downforce add-ons of the Z07-packaged Z06, because it doesn't need them. What you can't get on the Z06, though, is the unique Grand Sport wheel design, which comes in five different finishes. Stingray Brake Lights, Interior The dead giveaway for the Grand Sport is the hash marks on the front fenders which come in six different colors. Another way to spot the Grand Sport is the taillights, which use the Stingray's red lenses instead of the blacked-out Z06's lights. Z06 body plus taillights equals Grand Sport. Got that? The Grand Sport also comes with body-color rear fender vents, which are black on the Z06. And the Grand Sport's interior is based on the Stingray except the Collector Edition, which has unique blue accents.