2012 Chevrolet Suburban Lt 4x4 on 2040-cars

Auto blog

2016 Camaro gets most revealing tease yet

Chevrolet started its long teaser campaign for the 2016 Camaro by just revealing the exhaust manifold and front frame, but as time has passed the company has slowly unveiled more. In the latest glimpse ahead of the pony car's May 16 debut, we're actually getting to see the model's profile completely undisguised. As suggested by the recent tease of the rear and hood, the 2016 Camaro wears a sharper, more angular design than the current model. This is especially the case when you look at the taut lines making up the rear. Chevy claims that the new shape underwent 350 hours of wind tunnel tests to be able to generate left lift, improve cooling and reduce wind noise in the cabin. A smooth underbody pan is among the aerodynamic tweaks, and it runs from underneath the front grille to the center of the Camaro. Chevy asserts that all of the changes at the front help reduce lift by 30 percent. Related VIdeo: 2016 Camaro is all about the Aero Total aerodynamic lift improved by 30 percent for improved stability 2015-05-11 DETROIT – After 350 hours of wind tunnel testing – often 24 hours a day – the new Camaro will slip more easily through the wind, and drivers of the Camaro SS will experience a marked improvement in reduced aerodynamic lift. These changes illustrate the lengths the aerodynamics team went to for improved performance, stability, cooling and lower wind noise intrusion "The importance of aerodynamics increases exponentially as we increase vehicle performance," said Kirk Bennion, Exterior Design manager. "As engine output increases, we need more engine cooling. As acceleration and top speeds climb, we need to reduce lift for better high-speed stability. However, we cannot make any changes at the expense of increasing drag, which can hurt fuel economy. "To balance these different aerodynamic targets, we tested literally hundreds of changes on the new Camaro, millimeters at a time." For example, the initial design called for the lower grille bars to be set at a 20-degree angle to the horizon. However, after meticulous testing, the team improved engine-cooling airflow by 1 percent by shifting the angle to 13 degrees – a change that achieved the airflow target while maintaining the original grille design. And rather than a traditional front air dam to reduce aerodynamic lift, the team developed a flush belly pan that stretches from the front grille to the center of the vehicle.

GM investing $167m in Spring Hill for new midsize vehicles

General Motors has announced a large investment in its Spring Hill, Tennessee facility. The former home of Saturn production will be getting a $167 million addition to a previously announced $183 million, to cover a pair of new midsize vehicles. The investment is expected to create 1,800 jobs at the factory.
That $350 million is being divvied up for a pair of programs at Spring Hill. The first will take the bulk of the money ($223 million) and create 1,000 of the 1,800 jobs, while the other will take the remaining $127 million and generate the leftover 800 positions. But GM says the investment will cover "midsize vehicle programs." So what could they be?
The leading candidate in our minds is a new crossover for Buick, called the Anthem, that will slot between the Encore and Enclave, but will be slightly smaller than the Equinox and Terrain. As we've explained, the new model will likely be the first product to sport GM's new D2UX platform, which will eventually replace both the Delta and Theta platforms. Spring Hill is already building the Equinox, so there could be some credence to this theory.

2016 Chevrolet Camaro starts at $26,695

Parking the new 2016 Chevrolet Camaro in your driveway will cost $26,695, including the $995 destination charge. That's a cut from $27,000 for the same trim on a 2015 Camaro. If you prefer a V8 under the hood, then the base 1SS goes for $37,295, compared to $34,500 for that model currently. The 2016 Camaro is offered as a coupe and convertible in four trim levels: 1LT, 2LT, 1SS, and 2SS. The LT is available with a 2.0-liter turbocharged four-cylinder with 275 horsepower and 295 pound-feet of torque or a 3.6-liter V6 with 335 hp and 284 lb-ft. The SS gets a 6.2-liter V8 with 455 hp and 455 lb-ft. The first examples arrive before the end of the year, but droptops and the turbo engine don't materialize until the first quarter of 2016. Base models come with tech like Chevy's MyLink infotainment system with Apple CarPlay, a rearview camera, automatic climate control, and multiple driving modes. The RS Package adds to the style with 20-inch wheels, HID headlights, LED taillights, a different grille insert, and rear spoiler. Opting for the SS brings a more aggressive exterior look, plus performance upgrades like Brembo brakes, differential and transmission coolers, and a limited slip differential on those with a manual gearbox. Upgrading to the 2SS adds amenities like heated and ventilated front seats, wireless phone charging, a Bose stereo, rear cross-traffic alert, and Side Blind Zone Alert with Lane Change Alert. Options like a Magnetic Ride Control suspension and dual-mode exhaust offer additional sportiness. Reading about the 2016 Camaro is nice, but Chevy now has a visualizer for the pony car. It's not quite a full configurator but lets you check out different colors, wheels, and stripes to imagine your future purchase. Enjoy finding just the right combo. Related Video: CHEVY REVEALS PRICE, ONLINE VISUALIZER FOR 2016 CAMARO 21/08/15 Gen Six Camaro offers more performance, technology and customization choices DETROIT – As production of the lighter, more powerful, more advanced 2016 Camaro grows near, Chevrolet revealed more details to help customers tailor their Gen Six exactly how they want it, including pricing information and an online visualizer. The 2016 Camaro offers higher levels of performance, technology and refinement, starting at a suggested retail price of $26,695 for the Camaro 1LT, while the most powerful Camaro SS ever starts at $37,295 for the 1SS.