5dr Hb Manual Ls New 4 Dr Hatchback Manual Gasoline 1.8l L4 Mpi Dohc 16v Silver on 2040-cars

Auto blog

Is the skill of rev matching being lost to computers?

If the ability to drive a vehicle equipped with a manual gearbox is becoming a lost art, then the skill of being able to match revs on downshifts is the stuff they would teach at the automotive equivalent of the Shaolin Temple. The usefulness of rev matching in street driving is limited most of the time – aside from sounding cool and impressing your friends. But out on a race track or the occasional fast, windy road, its benefits are abundantly clear. While in motion, the engine speed and wheel speed of a vehicle with a manual transmission are kept in sync when the clutch is engaged (i.e. when the clutch pedal is not being pressed down). However, when changing gear, that mechanical link is severed briefly, and the synchronization between the motor and wheels is broken. When upshifting during acceleration, this isn't much of an issue, as there's typically not a huge disparity between engine speed and wheel speed as a car accelerates. Rev-matching downshifts is the stuff they would teach at the automotive equivalent of the Shaolin Temple. But when slowing down and downshifting – as you might do when approaching a corner at a high rate of speed – that gap of time caused by the disengagement of the clutch from the engine causes the revs to drop. Without bringing up the revs somehow to help the engine speed match the wheel speed in the gear you're about to use, you'll typically get a sudden jolt when re-engaging the clutch as physics brings everything back into sync. That jolt can be a big problem when you're moving along swiftly, causing instability or even a loss of traction, particularly in rear-wheel-drive cars. So the point of rev matching is to blip the throttle simultaneously as you downshift gears in order to bring the engine speed to a closer match with the wheel speed before you re-engage the clutch in that lower gear, in turn providing a much smoother downshift. When braking is thrown in, you get heel-toe downshifting, which involves some dexterity to use all three pedals at the same time with just two feet – clutch in, slow the car while revving, clutch out. However, even if you're aware of heel-toe technique and the basic elements of how to perform a rev match, perfecting it to the point of making it useful can be difficult.

GM recalling 521,817 cars in two campaigns

General Motors is issuing two, separate recalls covering a total of 521,817 vehicles worldwide. The larger campaign covers 468,887 units of the 2011-2012 Chevrolet Malibu. Specifically, 437,045 of these are in the US, and the rest are outside the country. In these sedans, a steel cable that connects the seat belt to the vehicle can fatigue and separate. GM knows of 36 claims about the problem but only one minor injury. According to The Detroit News, this happened when a taxi driver hit his head. To fix things, dealers will replace the "outboard lap mounting bracket," which will move the tensioner rearward. They'll also inspect and if necessary replace the steel cable and lap pretensioner. In the second campaign, 52,930 examples the 2015 Chevy Colorado and 2015 GMC Canyon have seat frame attachment hooks that were installed incorrectly during assembly. GM hasn't received any reports of crashes, injuries, or fatalities about this problem. Dealers will inspect the affected trucks and repair as necessary. GM spokesperson Alan Adler told Autoblog that he didn't yet have a specific date when affected owners would receive official mailings about either of these recalls. GM Statement General Motors is recalling 48,309 2015 model year Chevrolet Colorado and GMC Canyon midsize pickup trucks in the U.S. because certain seat frame attachment hooks were not properly attached to the vehicle body during assembly. Dealers will inspect the potentially affected seats for proper installation and repair if necessary. GM knows of no crashes, injuries or fatalities related to this condition. The total vehicle population of the recall is 52,930 including 4,620 vehicles sold in Canada. General Motors is recalling 437,045, 2011-2012 model year Chevrolet Malibus in the U.S. because the flexible steel cable that connects the safety belt to the vehicle can fatigue and separate over time as a result of occupant movement in the seat. Dealers will replace the outboard lap mounting bracket to relocate the tensioner slightly rearward. Dealers will inspect the cable and, if necessary, replace the lap pretensioner. GM knows of 36 claims, no crashes or fatalities and one minor injury reportedly related to the condition. The total vehicle population of the recall is 468,887 including Canada, Mexico and exports.

GM's redesigned full-size 2021 SUVs face delay over coronavirus

As General Motors works to conserve cash for the coronavirus pandemic, the automaker reportedly told suppliers that it is postponing development of several future vehicles. The situation may cause GM to delay the launch of the 2021 Cadillac Escalade, GMC Yukon, Chevrolet Tahoe and Chevrolet Suburban SUVs, which had been planned to roll out in April. The original launch plan for the redesigned full-size SUVs, which are some of the most profitable vehicles produced by GM, had called for production of the current models to end at its plant in Arlington, Texas, this week. After a retooling process, the redesigned SUVs were slated to begin production late in the month of April. In an email to suppliers viewed by Reuters and confirmed as authentic by GM, the automaker also said it was suspending development work on six future vehicle programs, including updates of the Chevrolet Equinox, GMC Terrain, Cadillac XT4, Bolt EV, Chevrolet Silverado and GMC Sierra. GM said preproduction work on those programs would be pushed back to calendar year 2021, with most of the updated vehicles scheduled to be launched as 2022 models. According to the Detroit News, work has also been paused on the Chevy Camaro and a future version of the Corvette that has yet to be unveiled and wasn't planned for production during the 2020 calendar year. Last week, the automaker told employees and suppliers it was delaying work on some future vehicles while pushing ahead with near-term models such as its redesigned full-size SUVs and the GMC Hummer EV, Cadillac Lyriq, Chevrolet Bolt EUV and Cruise Origin, as well as its new Ultium battery system. A GM spokesman who spoke with Reuters reiterated on Monday what the automaker had said last week — that the situation with its U.S. plants was "fluid" and that the automaker would "continue to evaluate" whether and when to reopen those plants on a week-by-week basis, with "employee safety" guiding that decision. GM said previously that it was closing most of its U.S. plants indefinitely. In its Monday email, GM asked suppliers to stop work on all pre-production tooling and pre-production parts manufacturing, but also not to dispose of any tooling or materials. GM told Reuters it had solicited volunteers from its workforce to finish the build-out of the current SUVs on a single shift in Arlington.