13 New Chevy 2500hd, Additional Savings Available! Call!, Diesel, 4x4, 4wd on 2040-cars

Auto blog

2016 Chevy Colorado and GMC Canyon recalled for opening console lids

The Basics: General Motors is recalling 9,200 examples of the 2016 Chevrolet Colorado with build dates between August 25, 2015 and September 24, 2015, and the 2016 GMC Canyon manufactured from August 28, 2015 to September 24, 2015. In total, 8,763 of these pickups are in the US, and the rest are in Canada or Mexico. The Problem: The console compartment lid could open in a crash, and the items inside the storage compartment might hit occupants during the accident. This fault puts the pickups out of compliance with the Federal Motor Vehicle Safety Standard. Injuries/Deaths: None reported. The fix: Dealers will replace the console compartment door latch assembly with an improved part. If you own one: GM has not yet told NHTSA when the repairs for these pickups begin. Related Video: RECALL Subject : Console Door may not Fully Latch/FMVSS 201 Report Receipt Date: DEC 01, 2015 NHTSA Campaign Number: 15V807000 Component(s): LATCHES/LOCKS/LINKAGES Potential Number of Units Affected: 8,763 All Products Associated with this Recall Vehicle MakeModelModel Year(s) CHEVROLET COLORADO 2016 GMC CANYON 2016 Details Manufacturer: General Motors LLC SUMMARY: General Motors LLC (GM) is recalling certain model year 2016 Chevrolet Colorado trucks manufactured August 25, 2015 to September 24, 2015, and GMC Canyon trucks manufactured August 28, 2015 to September 24, 2015. The affected vehicles have a console compartment lid latch assembly that may fail to keep the compartment door closed in the event of a crash. As such, these vehicles fail to comply with the requirements of the Federal Motor Vehicle Safety Standard (FMVSS) number 201, "Occupant Protection in Interior Impact." CONSEQUENCE: If the console compartment door does not remain closed in a crash, the contents stored in the console may strike the vehicle occupants, increasing their risk of injury. REMEDY: GM will notify owners, and dealers will replace the console compartment door latch assembly, free of charge. The manufacturer has not yet provided a notification schedule. Owners may contact Chevrolet customer service at 1-800-222-1020, or GMC customer service at 1-800-462-8782. GM's number for this recall is 16370. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

GM to sink over $900M into 4 plants, mostly for a new V8

FLINT, Mich. — General Motors says it will spend more than $900 million to update four factories, with the bulk going to an engine plant in Flint, Michigan, to build the next-generation V8 for big pickup trucks and SUVs. Factories in Rochester, New York; Defiance, Ohio; and Bay City, Michigan, also will see investments, some to make V8 engine components as well as parts for future electric vehicles, the company said Friday. The investments won't create any new jobs, but they will preserve about 2,400 hourly and salaried positions positions at the four sites, the company said. The investments “provide job security at these plants for years to come,” Gerald Johnson, GM's manufacturing chief, said in a statement. Much of the money, $579 million, will go to Flint Engine Operations for equipment to build the sixth-generation small-block V8 that will go into the next round of big pickup trucks and SUVs. The plant now employs about 700 people who also will keep making their current product, a diesel engine used in light trucks. GM, like other automakers, is facing stricter government fuel economy standards and pollution limits starting in the 2024 model year. New vehicles sold in the U.S. will have to average at least 40 miles per gallon of gasoline in 2026, up from about 28 mpg, under new Biden administration rules that undo a rollback of standards enacted under former President Donald Trump. That means the new V8 will have to get better mileage and pollute less than the current versions. Although GM wouldn't release details on the new engine, Johnson said during a news conference at the Flint plant that it would be more efficient than the current version. GM has a goal of selling only electric passenger vehicles by 2035, but Johnson said that's a dozen years out, a period when many customers will still want gas engines. “We know that has a horizon,” he said. “Between here and there, there are a lot of internal combustion customers that we don't want to lose,” he said. In addition to Flint, GM's engine components plant in Bay City, Michigan, will get $216 million to build camshafts and connecting rods, and to machine engine blocks and heads for the new V8 being built in Flint. The plant now employs about 425. The Defiance, Ohio, foundry will get $55 million to build a variety of block castings for the new V8. Included is $8 million for castings to support future electric vehicles, the company said. The plant has about 530 employees.

Callaway rolls out radical Corvette C7 GT3-R at Hockenheim

Leave it to Callaway to take a badass Corvette and make it even more so. Case in point: the new Callaway Corvette C7 GT3-R you see here. It made its big debut this past weekend during the season finale for the ADAC GT Masters series at the legendary Hockenheimring – the on-again, off-again home of the German Grand Prix. Why in Germany, you ask? Because that's where Callaway Competition is based. The racing division got its start in Heilbronn as Woeher & Ciccone back in 1985. It joined with US-based Callaway Cars in 1988 to distribute its modified Corvettes in Europe, and branched out into constructing racing cars in 1994. And this is its latest project. Designed in partnership between Callaway Competition in Germany and Canadian designer Paul Deutschman, the new GT3-R replaces the previous C6-based Z06.R GT3. It packs a 6.2-liter V8 pumping 600 horsepower through an X-Trac six-speed sequential gearbox. And as you can see, it sure looks the part. Callaway will be offering the new GT3-R to privateer teams for entry in a variety of racing series around the world. But it'll also be fielding the example you see here, sponsored by Whelen Engineering that – like Callaway Cars – is based in Connecticut. Callaway Corvette C7 GT3-R World Debut at Hockenheim October 3, 2015 Hockenheim, Germany – October 3, 2015 – This weekend's ADAC GT Masters Season Finale was the backdrop for the unveiling of Callaway Competition's new Callaway Corvette C7 GT3-R. Following a brief presentation to media and invited guests, the successor of the C6-based Callaway Z06.R GT3 was displayed to the public for the first time on October 3, 2015 at the Hockenheimring in Germany. Constructors of GT race cars since 1990 and based in Leingarten Germany, Callaway Competition possesses a wealth of experience, technical know-how and a broad network of specialized professional partners. These elements were crucial to conduct such a large undertaking. After nearly two years of comprehensive planning, intensive development and expert fabrication of vehicle components, Callaway Competition completed the first C7 GT3-R just a few weeks ago. Its striking design comes as a result of the collaboration between Canadian designer Paul Deutschman and team owners Giovanni Ciccone and Ernst Wohr. Mike Gramke, Uwe Hoffmann, Florian Mohring and Andre Zanke were also heavily involved in the vehicle's development.