2014 Chevrolet Silverado 1500 Ltz on 2040-cars

Auto blog

How GM engineers are using diaper 'snow' to keep you warm

Testing how snow affects General Motors' vehicles isn't really a problem right now for the company's engineers, but in the dog days of summer the process isn't exactly easy. The only real option is for them to book time at the automaker's climatic wind tunnel. However, a flash of brilliance from an engineer allows snow to be simulated regardless of the temperature outside, and the discovery is all because of his daughter's wet diaper. The realization came to GM Thermal Systems engineer Nicholas Jahn while he was swimming with his daughter and noticed how her diaper ballooned in size in the water. He found out the substance that makes this possible is called sodium polyacrylate. When the material gets wet it grows and forms fluffy flakes that are a close imitation of snow. Best of all, the stuff can be prepared easily any time of the year, and it's reusable. The engineering team uses the material to test the effectiveness of the heating systems of GM's vehicles. They spread the sodium polyacrylate over the inlets at the base of the windshield to obstruct the airflow and then crank the heater. After some time, they can see how much is being sucked into the system and design more efficient systems in the future. See how the process works in the video above and read about the diaper discovery in GM's press release below. Diapers Change Chevy Cruze Winter Warm-up Time GM validation engineer uses diaper material "snow" to reduce frigid drives 2015-01-06 DETROIT – An item commonly found on an infant's changing table is helping General Motors' engineers simulate snow year round, ensuring heating systems in cars like the 2015 Chevrolet Cruze can quickly and efficiently warm its interior. Packed snow can prevent air from entering the inlet panel at the bottom of the windshield, obstructing the flow of air into the heating system and reducing the amount of air it can push out. This can lead to less efficient warming of the car's interior and windshield defrosting. "The last thing anyone wants to do when it's freezing cold out is scrape their windshield," said Nicholas Jahn, GM Vehicle Thermal Systems engineer. "The testing we perform on the Chevrolet Cruze with the diaper material allows us to maximize the car's heating capabilities." Ironically, Jahn stumbled upon his diaper-based testing method in the middle of summer. During a swim with his daughter, he noticed her diaper multiplied in size when it came into contact with water.

2020 Ford Explorer vs 3-row crossover rivals: How they compare on paper

The 2020 Ford Explorer has finally landed, and if history serves as an indicator, it should be bigger than sliced bread. And people sure love themselves some sliced bread. This new Explorer may look familiar on the outside, but beneath the skin is a radically new rear-drive platform related to the Ford Mustang (as opposed to a front-drive platform related to the Ford Taurus and a Volvo from the 1990s). Turbocharged four- and six-cylinder engines now exclusively rest under its hood, which as you'll see below, both better anything its competitors offer. Ah, but if you're curious to know how the new 2020 Explorer compares to its various three-row family crossover rivals, take a look at the chart below where we stack it up against the 2019 Chevrolet Traverse, 2019 Honda Pilot, 2020 Hyundai Palisade, 2019 Subaru Ascent and 2019 Toyota Highlander. There are others of course (Mazda CX-9, Dodge Durango, GMC Acadia, VW Atlas), but we only had so much room on the chart, and these were the newest and/or most likely to be cross-shopped with the new Explorer. Engine specs and towing Although the Traverse's V6 just nips it on horsepower, the 2020 Explorer's base 2.3-liter "EcoBoost" turbocharged four-cylinder engine smokes it on torque. Therefore, "best-in-class" power seems like a fair claim from Ford. That there's also a 365-horsepower turbo V6 available, plus a hybrid and even-more powerful ST model on the way shows that Ford isn't kidding around under the hood. Curb weight also seems competitive for the segment. In terms of drivetrain, the Explorer is the only member of this particular group to come standard with rear-wheel drive (2.3-liter only). The Durango is the only other three-row, non-luxury crossover to do so. This is significant for two reasons: First, you could potentially do a power slide in an Explorer. Second, and more important, those in the Snowbelt will have to opt for all-wheel drive (it comes standard with the 3.0-liter). By contrast, a set of winter tires will probably do the job just fine if you want to save some money and gas by sticking with its rivals' standard front-wheel drive. Well, except for the Subaru Ascent — that's standard with AWD. In terms of towing, the Explorer takes the cake with as much as 5,300 pounds for the four-cylinder and 5,600 pounds for the V6. Everything else tops out at 5,000, though again, the Durango is capable of besting them all thanks to its Hemi V8 engine option.

Cadillac XT4 crossover to be built in Kansas City

Cadillac's upcoming XT4, a crossover we've previously known as the XT3 in a long series of spy shots of heavily camouflaged mules, will be built at General Motors' assembly plant in Kansas City on the same platform as the Chevrolet Malibu, Bloomberg reports, citing people familiar with the plan. That will give Cadillac another entry in the red-hot luxury crossover segment and, GM hopes, help to reverse a sales slump in the U.S. It'll also breath life into the Kansas City plant that makes the slow-selling Malibu, where GM cut a third shift last year, by sharing the assembly line between the crossover and sedan and defraying costs for each vehicle. The XT4 was known most recently as the XT3, with styling cues based on the Escala concept sedan from 2016. It's slightly smaller than the XT5, Cadillac's top-selling vehicle, and will also augment the full-size Escalade in Cadillac's stable of SUVs when it makes its expected debut later this year. Cadillac last week reported its second-highest-ever sales mark with 356,467 vehicles, an increase of 15.5 percent over 2016. But that mark papers over an 8 percent sales decline in the U.S. to 156,440 vehicles. The luxury brand is on a hot streak in China, where sales jumped 50.8 percent last year to 175,489 units.Related Video: Image Credit: Brian Williams Plants/Manufacturing Cadillac Chevrolet GM Crossover sales cadillac xt5 cadillac xt4 cadillac xt3