2014 Chevrolet Silverado 1500 Lt on 2040-cars

Auto blog

2019 Chevy Silverado 1500 vs. 2019 Ram 1500 vs. 2018 Ford F-150: How they compare

The full-size pickup truck market is seriously hot right now. Both Ram and Chevrolet have introduced completely redesigned trucks, the 2019 Ram 1500 and the 2019 Chevy Silverado, and as the companies slowly roll each one out, more and more information comes to light. We've put together this comparison post to help you keep track of all the features and specifications of each of these new models, along with the updated 2018 Ford F-150. Among the stats we'll take a look at are engines, power, fuel economy, trim levels, weight and more. Weight savings Both the 2019 Ram 1500 and 2019 Chevy Silverado 1500 have gone on a diet for the new model year, similar to the one the F-150 went on in 2015. The Silverado is the weight-loss leader, having shed 450 pounds when comparing quad-cab V8 models. The Ram 1500 lost 225 pounds compared to the current truck. Both trucks achieve their weight loss in part due to the use of aluminum parts. On the Silverado, the hood, doors, and tailgate are aluminum, while on the Ram, just the hood and tailgate are aluminum on the body. Compare that to the F-150, which uses aluminum for all exterior body panels for a total weight loss of up to 732 pounds, which makes the aluminum-intensive F-150 the weight-loss leader. View 160 Photos Engines and transmissions There's only a bit of overlap in powertrains on the Ram 1500 and Chevy Silverado. Each has a V8 for the top engine. The Ram's is a 5.7-liter Hemi V8 making 395 horsepower and 410 pound-feet of torque. The Silverado will once again use a 6.2-liter V8 as its range topper with the same 420 horsepower and 460 pound-feet of torque as the current model. Both of these V8s boast some extra fuel saving technology. The Chevy's 6.2-liter (and some 5.3-liters) comes with the company's latest cylinder deactivation system that can shut off any or nearly all of the eight cylinders. The Ram's V8 boasts an optional 48-volt mild-hybrid system that, in addition to likely helping fuel economy, can provide up to 130 pound-feet of torque right off the line. With the Ram, fuel economy sees an improvement of 2 mpg in the city and combined ratings for 17 and 19 respectively. Highway fuel economy improves by 1 mpg to 23 with two-wheel drive and 22 with four-wheel drive. The Silverado's 6.2-liter V8 only improves city fuel economy by 1 mpg to 16, and actually loses 1 mpg on the highway. The new 5.3-liter engine with the fancy cylinder deactivation does see an improvement over the simpler version.

Recharge Wrap-up: Ford HQ gets giant solar array, Chevy City Express gets 24 MPG city

Ford will be building Michigan's largest solar array at its Dearborn headquarters. With funding from DTE Energy, the solar carport will provide covered parking, as well 30 charging stations for electric vehicles. The array is expected to generate 1.13 million kWh per year for Ford's operations, and offset 794 metric tons of carbon emissions. Read more in the press release below. Chevrolet announced the fuel economy for the 2015 City Express, at 25 mpg combined. The cargo van is rated at 24 mpg in the city, and 26 mpg on the highway. Chevy credits the van's inline four-cylinder engine and continuously variable transmission for its impressive city mileage. For its customers - which are mainly businesses - "The fuel economy of the City Express will help stretch their dollar at the pump and give them the flexibility to invest the savings back into their business," says Chevrolet's Ed Peper. The City Express starts at $22,950. Read more in the press release below. Engineers at the University of Wisconsin have developed an efficient engine that runs on a diesel-gas blend. The engine, which uses a computer to control the blend proportions, is about 15 percent more efficient than the any diesel engine according to mechanical engineering professor Rolf Reitz. The team has put the experimental reactivity controlled compression ignition (RCCI) engine in a demonstration car - a 2009 Saturn. "This vehicle can do 50 miles per gallon," says Reitz, who believes the system could be improved further. Read more at Wisconsin Public Radio. The Southeast Alternative Fuel Conference and Expo will take place in October in Raleigh, North Carolina. Held at the NC Clean Energy Technology Center from October 22-24, the event will feature a variety of exhibitors, speakers and, most importantly, alternatively powered vehicles. "The three day conference will be a one-stop shop for fleet and transportation related decision makers to learn about return on investment, efficiency and alternative transportation fuels such as biodiesel, electricity, ethanol, propane and natural gas," says Anne Tazewell of the NC Clean Energy Technology Center. If you can't make it to Raleigh for the Expo, you can still enter to win a free two-year lease of a Nissan Leaf at the Center's website. Learn more about the event in the press release, below.

Chevy's 6.6-liter Duramax is pretty much all new

To say there's a heated battle in heavy-duty pickups is an understatement, with Chevrolet, Ford, and Ram constantly trading blows of increased torque, horsepower, and towing capacity. The latest salvo is the revised, more powerful turbo diesel 6.6-liter Duramax V8 in the 2017 Chevy Silverado. It has 910 pound-feet of torque, an increase of 145, putting it nearly level with the Ford Super Duty. Here's a closer look at where those gains come from. How exactly did Chevrolet add all that torque plus 48 horsepower? The automaker essentially took a fine-tooth comb to the entire engine. Chevy says it changed 90 percent of the V8, and the cumulative effect of those small changes adds up to big increases. As you might guess, the turbocharger is updated. The larger unit features electric actuation of the variable nozzle turbine (VNT), and what Chevy calls a double axle cartridge mechanism that separates the VNT moving parts from the housing. That helps with heat performance as well, with a claim that the exhaust side of the turbo can run continuously up to 1,436 degrees Fahrenheit. Helping that cause are six exhaust gaskets made of Inconel - an nickel alloy that contains chromium and iron – and upgraded stainless steel for the exhaust manifold. Despite having the same cast iron cylinder block, albeit with some minor enhancements, the engine has new cylinder heads, pistons, piston pins, connecting rods, and crankshaft, which have all been upgraded to handle 20 percent higher cylinder pressures. Alongside the increase in pressure, Chevrolet also increased the cylinder head's structure with a honeycomb design. The pattern features high-strength aluminum with dual layer water jackets that not only improve strength, but also optimize water flow for better cooling. For 2017, the cylinder head also benefits from integrated plenum that aids the engine in getting more air under heavy loads. The cylinder head isn't the only component to get a minor update, as the pistons have a larger diameter pin for improved oil flow. The same detailed improvements has been bestowed to the humble connecting rods (second in our hearts only to the inanimate carbon rod). The new design has the bolts oriented roughly 45-degrees to the rod instead of parallel. The angle split design, as it's called allows for easier passage through the cylinder.