2014 Chevrolet Silverado 1500 Lt on 2040-cars

Auto blog

2016 Chevy Camaro performance figures released

If you want to make a car faster, there are two sure-fire ways to get the job done – add power and/or reduce weight. Chevy has done both for the 2016 Camaro, putting as much as 455 horsepower into its muscle coupe and shaving a few hundred pounds from every trim. That range-topping power comes courtesy of a 6.2-liter V8 engine, and it's enough grunt to push an automatic-equipped Camaro SS to 60 miles per hour in just 4.0 seconds flat (4.3 seconds with a manual) and down the quarter mile in 12.3 seconds at 116 mph (12.5 at 115 for the stick). Not coincidentally, those acceleration specs, at least on paper, put the V8-powered Camaro SS just above the Mustang GT on the muscle-car pecking order. When the road gets twisty, Chevy claims the Camaro SS can generate as much as .97 g on the skidpad. And, thanks in part to its Goodyear Eagle F1 summer tires, the SS can stop from 60 in as little as 117 feet. We look forward to finding out how nimble the new Camaro feels when compared to its primary competitors. <p>Your browser does not support iframes.</p> Moving down one notch to the 335-hp 3.6-liter V6, properly equipped 2016 Camaro coupes can hit 60 in as few as 5.1 seconds and cover the quarter in 13.5 at 103. Perhaps even more intriguingly, the 2.0-liter turbocharged four-cylinder and its 275 horsepower (the only configuration quicker with a manual transmission, incidentally) can propel the Camaro to 60 in 5.4 seconds and through the 'ol 1320 in 14 seconds flat. That's seriously quick, but buyers comparing the Camaro to the Mustang will find that the EcoBoost 2.3-liter is a bit more powerful (310 hp and 320 lb-ft) and quicker (5.1 seconds to 60). Chevy is making lots of noise about the efforts its engineers went through to shed weight from the 2016 Camaro, going so far as to shave down suspension bolts so that no thread went unthreaded. The weight-saving obsession pays off – base Camaro models are down 390 pounds while the SS model drops 223 pounds over the 2015. The 2016 Camaro SS boasts a power-to-weight ratio of 8.1 lbs per pony, a 14-percent improvement over the last-gen. Even though weight is down, chassis stiffness is said to be up by 28 percent over the fifth-gen Camaro coupe. Also of note: The Camaro is now lighter than the Mustang across the board when comparing like-to-like configuration levels. The 2016 Chevy Camaro starts at $26,695 (including $995 for destination).

EcoCar2 is on the hunt for a better, cleaner Chevy Malibu [w/video]

The students spent three years transforming an ordinary Chevy Malibu into a revolutionary vehicle. Not far from the building where General Motors once invented the Chevy Volt, a dozen or so college students are standing on the blacktop alongside a test track, watching a professional driver push the limits of a plug-in hybrid car they've built that's far more radical. These students, from Colorado State University, have spent the past three years transforming an ordinary Chevy Malibu into a revolutionary vehicle. At first glance, it still looks like a regular sedan. But under the hood, they've installed a hybrid powertrain that contains both hydrogen and electric power sources. Even by the standards of the Department of Energy competition they're participating in, it's an outlier. That's exactly what they had in mind. "We didn't want to come here and tell them how to build a better Volt," said Tom Bradley, faculty adviser for the Colorado State team. "They already know how to do that. We can tell them how to think about these possibilities in a whole new way." After three years of work, it all comes down to this. The Colorado State team was one of 15 that came to GM's Milford Proving Grounds last week for the final stretch of the EcoCar2 competition, which challenges regular college students who have no automotive experience to do nothing less than reinvent the American car. The teams have come from across North America, and include schools like Ohio State and Virginia Tech that have a long history of participating in similar competitions, and schools like the University of Washington and Embry-Riddle Aeronautical University that are here for the first time. After three years of work, it all comes down to this. The teams have operated 24 hours a day for almost two weeks here at the Proving Grounds, running a gamut of tests that include a 310-point safety inspection, emissions and energy-consumption tests and road tests, in which professional GM drivers ensure they're road worthy. The winning team will be announced tonight in Washington D.C. Revolutionary cars, ordinary package While other green-car competitions encourage extreme designs, this one comes with a somewhat constraining twist: Yes, students must improve fuel economy and reduce emissions, but in the end, they still have to have a car that would appeal to mainstream customers. In practical terms, that means they must keep conveniences like air conditioning and trunk space.

GM patent reveals new two-stage turbocharger

Modern turbochargers may be some of the best ever made, but performance is something that engineers are always trying to improve. According to GM Inside News, General Motors (GM) is hoping to alleviate some of the negative aspects of a two-stage turbocharger setup with a newly-patented design. The patent, that was filed on May 19, 2016, reveals a clever bypass system that allows the engine, a four-cylinder unit, to optimize both the low-pressure and high-pressure inlets for its respective functions. According to the filing, a conventional two-stage turbocharger setup is engineered to allow both turbines to operate simultaneously at low and mid engine speeds. At high engine speeds, only the low-pressure turbine works. The setup can't isolate either the low or high pressure side, which can impair low-end performance. GM's new two-stage turbocharger setup looks to eliminate this by linking the high-pressure turbo to the exhaust manifold through the high-pressure inlet duct. The low-pressure turbo is attached to the high-pressure turbo by a low-pressure inlet duct, which is linked to a connecting channel. A single actuator that is housed in the exhaust manifold creates a bypass that can opens the high-pressure inlet or close the connecting channel. Depending on what the engine load and speed is, the ECU guides the actuator—a single rotating spindle with discs corresponding to flanges on the high and low pressure sides—to isolate one of the two turbos. Isolating the turbos allow the respective inlets to be engineered for the best possible fluid dynamic performance. The setup should increase performance and decrease lag. There's no word on what car this setup will make an appearance on, but it will most likely be used in premium vehicles before trickling down to the rest of GM's vehicles. Related Video: News Source: GM Inside News, AutoGuide via GM Authority Cadillac Chevrolet GM Technology Sedan turbo patent engine turbocharging