2011 Chevrolet Silverado 1500 Lt on 2040-cars

Auto blog

Before Chevrolet's Redline, there was the Saturn Red Line

While Chevy rolls out Redline special editions across more of the lineup at this year's Chicago Auto Show, we've been eating some 'member berries and started thinking about the last time GM used the term. Back in 2004, Saturn rolled out Red Line (two words) editions of the Ion and Vue. The lineup was joined by the Sky Red Line in 2007, and the second-generation Vue kept the tradition going in 2008. This was in the heady days of the mid-2000s, before the financial crisis and GM's bankruptcy reorganization that saw the end of Saturn. The press release headline for the 2008 Sky is now cringe-worthy: "Hot-selling Sky helps drive Saturn product renaissance." Performance lineups were the hot new thing, as automakers attempted to cash in on the tuner trend popularized by The Fast and the Furious. Chevy had SS models, Pontiac had GXP, and Saturn had Red Line. Across the Detroit Metro area, Dodge had a slew of SRT models, and Ford's Special Vehicle Team brought us the SVT Lightning pickup, the SVT Focus, and a smattering of hopped-up Mustangs. The performance cred of Red Line models varied from car to car. The Ion Red Line shared the same engine as the original Chevy Cobalt SS, a 205-horsepower supercharged 2.0-liter four-cylinder, 65 hp more than stock. Car and Driver tested one with a 0-to-60-mph time of 6.1 seconds and said the Ion "tears down the wall that has separated enthusiasts from the Saturn brand for so long." The Vue Red Line, meanwhile, came with the same optional Honda-sourced 3.5-liter V6 you could get in the regular Vue, and added a stiffer, lower suspension, bigger wheels with more aggressive rubber, and recalibrated steering assist. When the Vue was redesigned for the 2008 model year, the Vue Red Line was a similar proposition. The engine was now from GM, and up 7 horsepower to 257, but you could get it in both Red Line and XE trim. Aside from the tire and suspension upgrades, Red Line models now came with a unique front fascia and rear exhaust cutouts. The most exciting Red Line, of course, was the high-performance version of the Sky roadster, which shared underpinnings with its Pontiac Solstice twin. This model came with GM's hot 2.0-liter Ecotec Turbo, good for 260 horsepower. The extra power was crucial in covering up the Sky's unfortunate manual gearbox ratios, which left the non-turbo model aching for torque in lower gears. As we all know, Saturn was taken by the grim reaper in 2009 after an attempt to sell the brand to the Penske Group.

GM exploring ways to raise half-ton Duramax diesel tow rating

Lots of truck owners cheered when GM announced fuel economy numbers for the 2020 Chevrolet Silverado with the 3.0-liter Duramax diesel inline-six. Even after Ram let loose its EPA mileage ratings for the 2020 Ram 1500 EcoDiesel, the Chevy oil-burner still took the trophy. The victory was years in the making, GM engineers spending an entire four-year development cycle refining the LM2 Duramax to increase mileage. The tradeoff, as well all know by now, is towing; the Duramax in half-ton duty pulls a maximum 9,300 pounds in the Silverado. Rivals across town can do more, the Ford F-150 PowerStroke rated at 11,500, the Ram 1500 EcoDiesel game to pull 12,560. GM engineer John Barta told Muscle Cars & Trucks that more hauling chops could be on the way, explaining, "We’re actually looking at upgrading some of the materials around (the engine bay) to see if we can maybe raise our tow rating." Engine bay materials are at issue due to thermal complexities underhood. John Barta, GM's assistant chief engineer of diesel engine controls, said the Duramax's inline-six configuration allowed engineers to get emissions hardware like the combined selective catalytic reduction, diesel oxidation catalysts, and diesel particulate filter unit closer to the engine, where it heats up quicker, getting emissions down quicker. But that filter puts another heat source in those confines, enforcing a cap on the tow rating to keep the engine and other systems from overheating. "If you look under the hood," he said, "youÂ’ll see a significant amount of silver ‘moon tapeÂ’ around to make sure things arenÂ’t getting overheatedÂ… if we were to go up in higher towing, which we can, we start impacting the possibility of deteriorating some of the components.” There isn't much space for more grille, so swapping for a better grade of "moon tape" or a different kind of material could reduce engine bay heat, extracting a higher tow rating in the process.  It's important to note a point Barta's been making for months about the Duramax figures, though. "Even though itÂ’s nice to brag about big numbers, in reality, light duty customers are not towing that large with their trucks," and, "We do know that (95 percent) of our light duty customers donÂ’t tow over 9,000 pounds." On our First Drive of the 2020 Silverado diesel we called out the tow rating, but emphasized that the Chevy and GMC have more important challenges to overcome.

Chevy to resume engine-building program for 2015 Corvette Z06

One of Chevrolet's most popular and unique customer features is set to return for 2015, as the company has announced that the Engine Build Experience is back. Interested owners will be able to screw together their engines beginning in March. The $5,000 option (which does not include the cost of travel) will give future owners of the 2015 Corvette Z06 the chance to screw together their car's actual 6.2-liter, supercharged V8. Available on each of the Z06's three trims, the Engine Build Experience includes a day at the Performance Build Center, instruction from an engine assembly tech, photographs of the experience and a personalized engine plaque. Once the build process is completed, the engine will (eventually) be fitted under the hood of the customer's personal Z06. "Chevrolet recognizes the passion customers have for Corvette and the Engine Build Experience offers them a truly unique opportunity for hands-on involvement in the creation of the heart of their new car," Corvette product manager Harlan Charles. "It's important for customers to understand their engine won't be installed the day after they built it. It will flow into the scheduling process for vehicle assembly, which depends on a number of logistical variables." Scroll down for the official announcement of the Z06's Engine Build Experience, available below. Exclusive Corvette Engine Build Experience Returns Program renewed for supercharged LT4 engine at new Bowling Green build center 2015-01-07 BOWLING GREEN, Ky. – Chevrolet announced today it is resuming the exclusive Engine Build Experience for Corvette Z06 customers – the only program of its kind for supercar customers. Starting in March 2015, Corvette Z06 customers will be able to assemble the 650-hp supercharged LT4 engine for their cars at the new Performance Build Center inside the Bowling Green Assembly Plant. "Chevrolet recognizes the passion customers have for Corvette and the Engine Build Experience offers them a truly unique opportunity for hands-on involvement in the creation of the heart of their new car," said Harlan Charles, Corvette product manager. "It's a chance to bond with their new car." The Engine Build Experience is selected with order code PBC and is offered on all Z06 trim levels.