1986 Chevy S-10 V-8 on 2040-cars

Auto blog

GM reintroduces Tripower name in the worst way possible

The story of General Motors' use of the Tripower moniker begins way back in 1957, when Semon E. "Bunkie" Knudsen, then General Manager of GM's Pontiac division, directed his engineers to inject more performance into his brand's line of V8-powered automobiles. Fuel injection was an option, but hot rodders flocked instead to Tri-Power (marketed way back when with a hyphen), which grafted a trio of two-barrel Rochester carburetors onto a single intake manifold. A legend was born. And that legend was born of performance. At idle and when full power wasn't required, Pontiac's Tri-Power system used just the middle carburetor, which helped make the setup easier to tune. Depending on the year and model, either a vacuum system or a mechanical linkage opened up the two outer carbs, thereby switching from two barrels to six, and allowing the engine to take in more fuel and air. And it was an easy marketing win – six barrels is better than four barrels, right? Because performance! So, when news filtered in that GM has resurrected the Tripower name, those of us who grew up attending classic car shows and wrenching on old Pontiacs did a double-take. And then we all collectively sighed. Turns out that today's Tripower refers to a trio of fuel-saving measures that include cylinder deactivation, active thermal management, and intake valve lift control, according to Automotive News. And, at least for now, it applies to GM's line of fullsize trucks powered by a 2.7-liter turbocharged four-cylinder engine. We're all for saving fuel whenever possible. And we have zero say in how any automaker chooses to market its products and technologies. But, we'll offer our two cents anyway: Relaunching a storied name from the past is fine. Relaunching a storied name from the past while completely overlooking the reasons the name got famous in the first place is only going to irritate the people who remember the name in the first place. Couldn't they just call this new technology package something else? Related Video: News Source: Automotive NewsImage Credit: Getty Green Marketing/Advertising Chevrolet GM Pontiac Automotive History Truck chevrolet silverado

2020 Ford Explorer vs 3-row crossover rivals: How they compare on paper

The 2020 Ford Explorer has finally landed, and if history serves as an indicator, it should be bigger than sliced bread. And people sure love themselves some sliced bread. This new Explorer may look familiar on the outside, but beneath the skin is a radically new rear-drive platform related to the Ford Mustang (as opposed to a front-drive platform related to the Ford Taurus and a Volvo from the 1990s). Turbocharged four- and six-cylinder engines now exclusively rest under its hood, which as you'll see below, both better anything its competitors offer. Ah, but if you're curious to know how the new 2020 Explorer compares to its various three-row family crossover rivals, take a look at the chart below where we stack it up against the 2019 Chevrolet Traverse, 2019 Honda Pilot, 2020 Hyundai Palisade, 2019 Subaru Ascent and 2019 Toyota Highlander. There are others of course (Mazda CX-9, Dodge Durango, GMC Acadia, VW Atlas), but we only had so much room on the chart, and these were the newest and/or most likely to be cross-shopped with the new Explorer. Engine specs and towing Although the Traverse's V6 just nips it on horsepower, the 2020 Explorer's base 2.3-liter "EcoBoost" turbocharged four-cylinder engine smokes it on torque. Therefore, "best-in-class" power seems like a fair claim from Ford. That there's also a 365-horsepower turbo V6 available, plus a hybrid and even-more powerful ST model on the way shows that Ford isn't kidding around under the hood. Curb weight also seems competitive for the segment. In terms of drivetrain, the Explorer is the only member of this particular group to come standard with rear-wheel drive (2.3-liter only). The Durango is the only other three-row, non-luxury crossover to do so. This is significant for two reasons: First, you could potentially do a power slide in an Explorer. Second, and more important, those in the Snowbelt will have to opt for all-wheel drive (it comes standard with the 3.0-liter). By contrast, a set of winter tires will probably do the job just fine if you want to save some money and gas by sticking with its rivals' standard front-wheel drive. Well, except for the Subaru Ascent — that's standard with AWD. In terms of towing, the Explorer takes the cake with as much as 5,300 pounds for the four-cylinder and 5,600 pounds for the V6. Everything else tops out at 5,000, though again, the Durango is capable of besting them all thanks to its Hemi V8 engine option.

This is what a 2017 Chevy Camaro Z28 could look like

The latest Camaro Z28, the enthusiast darling of the somewhat frumpy fifth-generation pony car, only hit the scene in 2014. It housed the wonderful 7.0-liter, naturally-aspirated LS7 small block V8 and featured a ton of aero bits. The trickest pieces may have been the dynamic spool valve shocks, legitimately race tech for the road. So with the new Camaro out in the wild, we were wondering what a new Z28 might look like, and thus, commissioned these renders based on our best guesses as to what a future Z28 might be. Since Chevy didn't stray too far from the Zeta-chassis Camaro formula with its new Alpha-based car, our vision of a new 2017 Camaro Z28 likewise is a sequel rather than a reboot. The exterior styling and aero details are similar, but sleeker. The defining and protruding front splitter is back, but it's smoothed slightly and better integrated. It shares quad exhaust pipes with the lowlier SS, but they're of the beveled Z06 variety, and sized up to a howitzer caliber. Instead of a weak faux rear fender vent, our version gains a real brake cooling duct. Some iconic elements, like the hood extractor vent and the large decklid spoiler, remain. What we can't see, we have to speculate on. As the track-focused, hardcore pony car in the Camaro lineup, the Z28 will have to do battle with the Ford Shelby Mustang GT350R. There's simply no avoiding it. And whereas Ford distinguished that car with a 5.2-liter, 526-horsepower, flat-plane-crank V8, Chevy is likely to look to the parts bin to find motivation. This isn't a knock; the LS and LT-series small block V8s are both numerous and power-dense. And there's one engine that seems to do the trick: the LSA, last seen in the old CTS-V and still on sale in the Camaro ZL1 (and of course, still being produced as a crate engine). In ZL1 form, the LSA makes about 580 hp, which is a nice margin over the GT350R. It's also a high-zoot but not top-of-the-line mill, having been mostly superseded by the 650-hp LT4. That puts our probable Z28 far enough behind the new CTS-V and current Corvette Z06 in the pecking order to be a safe bet, without hobbling it with the LT1 shared with the Camaro SS and regular Corvette. Will those trick spool-valve shocks from Multimatic make it to the Z28 again? Ford is taking the GT350R very seriously, and if the expensive but supremely capable suspension system is required to manhandle the Shelby at the track, you can bet that Chevy will pony up for it.