1955 Chevy 3100 Big Window Shortbed Pickup on 2040-cars

Auto blog

2016 Chevrolet Camaro powers up, slims down

Don't be fooled by its familiar appearance, the 2016 Chevrolet Camaro is vastly different than its iconic predecessors. It has a new chassis, a fresh engine lineup, and is loaded with clever technologies that promise to invigorate and improve the sixth generation of Chevy's legendary sports car. It was revealed Saturday before a crowd of enthusiastic Camaro revelers on Belle Isle in Detroit. Redesigning the sports coupe was a heady task, especially as its archrivals, the Ford Mustang and Dodge Challenger, drive better and are more powerful than ever. But the new Camaro is aiming to be the best combination of handling and raw performance, with quick acceleration and competitive fuel economy. "Redesigning the Camaro is thrilling and challenging all at once, but the secret is to offer something more," Mark Reuss, General Motors executive vice president of product development, said in a statement. It all began with a weight-loss plan. The new Camaro shed more than 200 pounds compared with the outgoing car, with 133 pounds coming from a lighter body-in-white. Then engineers culled weight nearly everywhere, using aluminum for the instrumental panel frame and some suspension components to trim as much fat as possible. The slimmer body rests on new bones. The Camaro's rear-wheel-drive platform is lighter and stiffer in a bid to improve handling. It's a modified version of the underpinnings used by the Cadillac ATS, though about 70 percent of the architecture is unique to the Camaro. Chevy said structural rigidity is improved by 28 percent. As you'll see, healthy doses of Cadillac and Corvette technologies have been used to bolster the Camaro's drive character and performance. The new car is also expected to handle better thanks to a slightly smaller footprint. It is about two inches shorter in length, with most of that due to the more compact wheelbase. It's also an inch shorter in height and an inch slimmer in width. So yes, the Camaro will be leaner, but it will still be plenty mean. The Camaro SS tops the range (for now) with the Corvette's 6.2-liter V8 pushing put 455 horsepower and 455 pound-feet of torque. Known as the LT1, is has a cast aluminum block and cast aluminum cylinder heads, and it's fortified with direct injection, variable valve timing, and cylinder deactivation. About 20 percent of the engine's parts are said to be unique to the Camaro, including the exhaust manifolds.

How long will the 'golden age' of performance last?

High-powered sports and luxury cars were everywhere at the New York Auto Show, prompting the obvious question for enthusiasts: How long will this golden age of performance last? Industry leaders have some time before regulations elevate the Corporate Average Fuel Economy level in 2025. Even then, they expect cars rippling with power to survive in some form. "Is it the end of an era," I don't think so," said Ola Kallenius, Daimler AG board member for Mercedes-Benz cars marketing and sales. "That performance element of individual mobility I don't think will ever go away." Kallenius, who oversaw the company's AMG division from 2010-2013, expects it to continue to grow. Last year, AMG sold a record 68,875 units around the world, an increase of 44.6 percent over 2014, with strong growth in the US, China, and Germany. Still, there's always the potential for gas to spike, and pending fuel economy regulations are looming. That could lead AMG to add electrification to its products, Kallenius said, pointing to the electric SLS as a test case. Chevy is also thinking ahead, said Al Oppenheiser, chief engineer of the Camaro. He wouldn't bite when asked about electrification for the Camaro (he did say "never say never"), but admitted in 2025 "it's going to be pretty tough to sell V8s." For now, things are rosy for muscle cars, and Chevy confidently showcased the 640-hp Camaro ZL1 in coupe and convertible form in New York. "I think that this is truly the golden age of performance," Oppenheiser said. It's hard to disagree. News & Analysis News: The 2017 Mazda MX-5 Miata RF was a show-stopper in New York. Analysis: There was a palpable energy when this RF — for Retractable Fastback — was revealed the night before the show at a trendy off-site venue near the Hudson River. Even as a parade of SUVs and flashy luxury cars rolled out the rest of the week, the Miata remained a hot topic. The Retractable Fastback is really a clever targa top, with part of the roof stowing behind the seats, adding about 100 pounds compared to the standard convertible. It makes the car more practical and arguably more attractive. The RF continues Mazda's tradition of selling the Miata with a hardtop variant. The first and second generations offered a detachable one, and a power retractable hardtop (a $1,700 option) was available on third-gen models. Judging by its reception in New York, the RF could prove to be even more popular than its predecessors.

GM patent reveals new two-stage turbocharger

Modern turbochargers may be some of the best ever made, but performance is something that engineers are always trying to improve. According to GM Inside News, General Motors (GM) is hoping to alleviate some of the negative aspects of a two-stage turbocharger setup with a newly-patented design. The patent, that was filed on May 19, 2016, reveals a clever bypass system that allows the engine, a four-cylinder unit, to optimize both the low-pressure and high-pressure inlets for its respective functions. According to the filing, a conventional two-stage turbocharger setup is engineered to allow both turbines to operate simultaneously at low and mid engine speeds. At high engine speeds, only the low-pressure turbine works. The setup can't isolate either the low or high pressure side, which can impair low-end performance. GM's new two-stage turbocharger setup looks to eliminate this by linking the high-pressure turbo to the exhaust manifold through the high-pressure inlet duct. The low-pressure turbo is attached to the high-pressure turbo by a low-pressure inlet duct, which is linked to a connecting channel. A single actuator that is housed in the exhaust manifold creates a bypass that can opens the high-pressure inlet or close the connecting channel. Depending on what the engine load and speed is, the ECU guides the actuator—a single rotating spindle with discs corresponding to flanges on the high and low pressure sides—to isolate one of the two turbos. Isolating the turbos allow the respective inlets to be engineered for the best possible fluid dynamic performance. The setup should increase performance and decrease lag. There's no word on what car this setup will make an appearance on, but it will most likely be used in premium vehicles before trickling down to the rest of GM's vehicles. Related Video: News Source: GM Inside News, AutoGuide via GM Authority Cadillac Chevrolet GM Technology Sedan turbo patent engine turbocharging