1954 Gmc 100 5 Window Pick Up Street Rod on 2040-cars

Auto blog

Most of the US won't get 2016 Chevy Volt

Every major plug-in vehicle launch in the US has been a patchwork operation, with automakers focusing their initial efforts on targeted locations like California where they expect to sell the most units. Today, we learned that even five years into the plug-in car project, the game remains the same. According to GM, the second-gen Chevy Volt is going to be rolled out in the same manner. In fact, GM is limiting availability of the 2016 model year Volt so much that most of the US will not have access to the car at all. For 39 states, the second-gen Volt will first be available as a 2017 model year vehicle at some point in the spring of 2016. When GM announced the buying process for the new Volt, it made it clear that dealers in California would be the first to place their orders. Hybrid Cars now reports that the first deliveries will be also limited to California and 10 other states that follow the California Air Resourced Board (CARB) rules: Connecticut, Massachusetts, Maryland , Maine, New Hampshire, New Jersey, New York, Oregon, Rhode Island, and Vermont. GM spokesman Kevin Kelly told AutoblogGreen that this is all according to plan. "Chevrolet has a shortened model year for the 2016 Chevy Volt that will have a limited distribution network," he said. "The 2016 Volt will be sold in our strongest EREV markets. The 2017 Chevrolet Volt will begin production early this spring and will be available throughout the country." It appears that non-CARB state Volt customers will be able to order their Volts starting October 1, according to documents posted on Hybrid Cars, where we also learn that 2016 Volt production for California started in August, will begin in late October for the other 10 CARB states, and in early 2016 for the rest of the US. Unsurprisingly, dealers outside of the 11 CARB states have been complaining that they can't order the much-anticipated new Volt for their customers just yet. Related Video:

Chevy bringing Spark RS Concept to SEMA

Well, the SEMA mess has well and truly begun. Every year, an increasing number of automakers flock to the Las Vegas auto show, bringing accessories and concept vehicles that are both awesome as well as occasionally questionable. Chevy will bring an RS concept of the new Spark to SEMA, signaling that its styling package will be applied to the brand's smallest vehicle in the near future. We can expect the usual stuff in a production Spark RS – larger wheels, a slightly sportier cabin, a more aggressive body kit, and a small drop in ride height – but for the concept, Chevy wasn't restrained by things like budget. The front splitter, and sill extensions, foglight surrounds, and rear bumper insert are all finished in carbon fiber. The 17-inch alloys are apparently inspired by the Corvette Z06's Z07 package, while the Dark Liquid Switchblade Silver paint is broken up only by a driver's-side stripe. The company is also using SEMA to show its new Red Line accessories, features both concept and production parts for the Trax, Camaro, Malibu, Colorado, and Sierra. Every vehicle gets Enhanced Silver Metallic paint, a charcoal finish on the roof, satin graphite/red graphics, black/red badge kits, and aside from the Colorado, tinted lamps. Individual mods for the Trax include relatively simple tweaks, including new 18-inch wheels, blacked-out bowtie badges, a lowered ride height, and custom badging. It's a similar story on the Malibu, except that its 19-inch wheels are a smidge larger, and its lowered ride height is the result of a concept kit. The first concept based on the new Camaro opts for 20-inch wheels, while adding a few more performance items. The ride height has been lowered, there's a new air intake system, and an upgraded brake package. Chevy has also replaced the front upper and lower grilles inserts with red accents. On the pickup side of the coin, the Colorado gets 18-inch wheels, new intake and exhaust systems, Goodyear Wrangler Fortitude tires, and flared wheelarches. The Silverado gets similar intake and exhaust upgrades, as well as the largest wheels of them all, with 22s at all four corners. The full-size truck also gets a Brembo brake package, while every vehicle, aside from the Camaro, gets Thule roof-mounted accessories. You can check out all six concepts in the gallery above, and then be sure to keep an eye open for live images from the floor of the 2015 SEMA show, slated to open next month.

Meet Alex Archer, the engineer behind GM's power-sliding center console

In 2009, a GM manager complained to a 59-year-old GM technician about the hassle of retrieving items from a pickup truck bed after driving shifted the cargo. In two days, the tech had come up with the ideas that, ten years later, would debut as the MultiPro tailgate. The engineering teams kept the tailgate secret in part by hiding mock-ups in a locked storage closet in GM's Vehicle Engineering Center in Warren Michigan for two years. A piece in the Detroit Free Press reveals that another storage closet in Warren would play the same role in a different cloak-and-dagger operation, this time for the power-sliding center console in GM's new full-sized SUVs. During a meeting in early 2017, bosses gave the job of the console's creation to 24-year-old design release engineer Alex Archer, just two years out of Stanford University with a degree in engineering and product design.  This time, the catalyst for the feature was an internal GM think tank called co:lab, where employees suggest ideas. Execs gave Archer the task because "They needed someone willing to ask a lot of questions," her 36-month mandate to produce a six-way console that could be a standard cubby or a gaping maw able to swallow four gallon jugs or hide a secret compartment. Clearly, she succeeded. It took Archer and the team nine months to devise a prototype, another six months to get the green light for production. As with the tailgate, the team working on the console grew to include designers, production engineers, and suppliers. Archer, now 26, shepherded the process, and her name is on the patent. "It took a ton of people, I'm just somebody who stuck with it the whole time," she said. GM like her work well enough to produce the "Day in the Life" segment above, five months before the world would hear about the console. Archer's path to engineering was as unlikely as getting the job for the console. She had entered Stanford with plans to be a doctor. But an innovation class during her freshman year, and a sophomore summer spent helping her grandfather rebuild a 1937 MG engine recharted her course. Her grandfather told her, "You know, you could be an engineer for a car company." Consumer reaction to Archer's work won't be far off, the SUVs slated to hit dealerships soon. Meanwhile, she's busy on something that could be just as intense as the console: Restoring a 1955 Packard Clipper in her garage. Head to Freep to check out the story of Archer and the console. Related Video: