1953 Chevy(gmc) 5 Window 4x4 on 2040-cars

Auto blog

This is your 2014 Chevrolet SS

Think you've waited long enough for this? If so, then you'll want to savor the high-res photos we've so far been given of the 2014 Chevrolet SS, the first rear-wheel-drive performance sedan from The Bowtie in 17 years.
We all know its our version of the brand new VF-model Holden Commodore, but what's under the hood that earns the appellation "performance?" A 6.2-liter LS3 V8 engine producing 415 horsepower and 415 pound-feet of torque. That's 35 hp and lb-ft less than the same engine is expected to produce in the 2014 Chevrolet Corvette. Chevrolet says the sedan will get from 0-to-60 miles per hour "in about five seconds."
Shifting comes courtesy of a six-speed automatic with paddles on the steering wheel, while stopping arrive via four-piston Brembo calipers up front, a single sliding piston in back. The forged aluminum wheels are 19-inchers all around, each set supporting right around 50 percent of the sedan's weight, and the aluminum hood and trunk are meant to keep the center of gravity low.

2015 Chevrolet Corvette Z06

"Corvette" has stood for American muscle, American sports car, and American supercar. In many cases, it still stands for America: liberty on the go, LS-powered freedom. There was also a time when it meant really impressive numbers that didn't equate to really impressive handling, and a not-so-nice cabin. The handling issue really turned the road-legal corner when the C5 Z06 was introduced in 2001, and by the time the super-duper ZR1 ended its run in 2010, Corvette had exorcised practically all of its dynamic demons. But when I took a seat in the 2015 Corvette Z06 on the first day of my week-long loan, I espied a few demons still squatting in the interior. When colleague Seyth Miersma drove the Z06, he wrote, "Listen, I'm not going to be the guy that dogs the Corvette for having a cheap-feeling interior, this generation has put those once-legitimate claims to rest." Well, I am going to be that guy, because I don't think those claims have been put to rest. One day Chevy will give us leather that looks and feels like leather, instead of the astonishingly thin hide that is laid directly on top of the instrument panel structure. This material was set off by white stitching, but there were no seams, just a trail of white stitches. In some places it was hard to tell where the leather ended and the plastic began; or it might all have been the same upholstery, I don't know. Five dollars of foam padding would add five thousand dollars of luxury to the cockpit. One day Corvette will have plastics that don't look so plasticky. I know General Motors can do it. And after years of thinking Corvette seats were too wide and flat, this latest Z06 is almost there. The seatbacks were nice, but the exaggerated side bolstering on the seat bottoms was too narrow and sharp. That's a personal preference, though; other drivers with thinner thighs will think differently. My complaint isn't that the interior isn't luxurious, it's that it's not luxurious enough. If Chevrolet was worried about pricing, it could add some kind of profligate package to the options list. Have some ex-Porsche people design it, call it the Teutonic Splendor Package, slap a massive price on it, and count the money. People will buy it, and no one will ever have to say again, "But the interior..." That said, this test car's cabin had every feature I wanted. The gauge cluster was bright, crisp, and readable in every shade of daylight.

GM diesel pickups first to undergo extra EPA, CARB testing

The effects of Volkswagen's long-running diesel emissions evasion are starting to spill over to other automakers, but General Motors is taking things in stride. The 2.8-liter, four-cylinder Duramax in the 2016 Chevrolet Colorado and GMC Canyon is the first engine to get extra scrutiny by the Environmental Protection Agency and the California Air Resources Board, Automotive News reports. Rather than just the usual in-lab test, it's also being checked on the road. However, the extra evaluation shouldn't have any impact on when the trucks with his mill hit dealers later this fall. "We're in our final stages of the EPA certification, and our launch is on track," Chevy spokesperson Otie McKinley tells Autoblog. The four-cylinder diesel in the trucks makes 181 horsepower and 369 pound-feet of torque, and the automaker is touting low NOx production. In the announcement for the Colorado's specs, the company calls it "the cleanest diesel truck engine ever produced by General Motors." The tech includes exhaust gas recirculation to lower combustion temperatures and improve emissions. There's also a urea tank like on the bigger diesels for full-size trucks, and it gets refilled in time with oil changes. An indication on the instrument panel lets drivers know when that's needed, too. Even with the more demanding testing, the company doesn't seem too worried about the four-cylinder passing. "Part of our development process is on-road and off-road [laboratory] testing," Scott Yackley, Chevy Trucks assistant chief engineer, said to Automotive News. In the wake of the VW scandal, the EPA has pledged more rigorous testing. Before, on-road emissions evaluations were largely limited to heavy-duty vehicles, but the agency has decided to apply the checks more often to other models. There's also now greater cooperation with Canadian authorities.