1973 Chevrolet Nova Has A 350 Engine Automatic Runs And Drives Very Good Clean on 2040-cars

Auto blog

Final C6 Corvette built in Bowling Green

With all of the attention given to the 2014 Chevrolet Corvette Stingray lately, you could be forgiven for thinking that it's already well along in production, yet tooling up for the new C7 has only just begun. In fact, production of the outgoing C6 generation in Bowling Green, Kentucky just halted on Thursday.
As the C6 has aged, production numbers have predictably ebbed along with demand, but this year, the addition of the 427 and 60th anniversary models resulted in an uptick in vehicles built - this, despite a model year shortened by around 25 percent to accomodate the new model changeover. The final C6 Corvette ever, No. 13,466 built this year, was a white 427 Convertible destined for the General Motors Heritage Center museum. The car's 7.0-liter V8 heart was assembled by Corvette chief engineer Tadge Juechter himself.
In total, Bowling Green pushed out 215,100 C6 Corvettes over nine years. If you're still a C6 fan at heart and are hoping to get a good deal on a phase-out model, step lively - Chevrolet reportedly had about 6,100 unsold units, which Autoweek suggests is good for around five and a half months of supply at the model's current sales rates. Given that demand will likely slacken even further as the C7 draws closer, that should be a big enough stockpile to keep dealers satisfied until 2014 Stingrays begin showing up on their forecourts in December.

Two More Recalls Push GM Total To 4.8 Million In A Month

General Motors announced two more recalls late Friday, bringing to 4.8 million the number of cars, trucks and SUVs the automaker has called back for repairs in the past month. The string of recalls, topped by an ignition switch problem in compact cars now linked to 13 crash deaths, has embarrassed the company and sidetracked its new CEO, who started work just over two months ago. GM has admitted knowing about the switch problem a decade ago, yet it didn't recall any cars until February. The recall delay has brought two congressional investigations and probes by the Justice Department and the National Highway Traffic Safety Administration. Late Friday night, GM announced it would recall 490,000 late-model pickup trucks and SUVs because transmission oil cooling lines weren't secured properly in their fittings. Transmission oil can leak from a fitting and hit hot surfaces, causing fires, the company said in a statement. GM said it knows of three fires and no injuries. The recall affects Chevrolet Silverado and GMC Sierra 1500 pickup trucks from the 2014 model year, as well as 2015 Chevrolet Suburban and Tahoe SUVs and the GMC Yukon and Yukon XL SUVs. All have six-speed automatic transmissions. The Silverado is GM's top-selling vehicle and an important profit center for the company. The GMC Sierra also is among GM's top sellers. Dealers will inspect the transmission oil cooling line fittings and make sure they're securely seated, at no cost to owners. Also Friday night, GM announced the recall of 172,000 Chevrolet Cruze compact cars because the right front axle shaft can fracture and separate while being driven. The recall affects cars from the 2013 and 2014 model years equipped with 1.4-liter turbocharged four-cylinder gasoline engines. If a shaft fractures, the wheels would lose power without warning and the cars would coast to a stop. GM says it has warranty reports of several dozen shaft fractures. It is not aware of any crashes or injuries. Dealers will replace the shafts free of charge. The recall allows dealers to resume selling affected Cruzes. GM issued a stop sale order on the cars Thursday night. The recall also covers about 2,500 replacement shafts used to fix manual transmission Cruzes that were recalled last September. In all, GM has recalled 4.8 million vehicles since last month, two million more than the company sold last year in the U.S.

Meet Alex Archer, the engineer behind GM's power-sliding center console

In 2009, a GM manager complained to a 59-year-old GM technician about the hassle of retrieving items from a pickup truck bed after driving shifted the cargo. In two days, the tech had come up with the ideas that, ten years later, would debut as the MultiPro tailgate. The engineering teams kept the tailgate secret in part by hiding mock-ups in a locked storage closet in GM's Vehicle Engineering Center in Warren Michigan for two years. A piece in the Detroit Free Press reveals that another storage closet in Warren would play the same role in a different cloak-and-dagger operation, this time for the power-sliding center console in GM's new full-sized SUVs. During a meeting in early 2017, bosses gave the job of the console's creation to 24-year-old design release engineer Alex Archer, just two years out of Stanford University with a degree in engineering and product design.  This time, the catalyst for the feature was an internal GM think tank called co:lab, where employees suggest ideas. Execs gave Archer the task because "They needed someone willing to ask a lot of questions," her 36-month mandate to produce a six-way console that could be a standard cubby or a gaping maw able to swallow four gallon jugs or hide a secret compartment. Clearly, she succeeded. It took Archer and the team nine months to devise a prototype, another six months to get the green light for production. As with the tailgate, the team working on the console grew to include designers, production engineers, and suppliers. Archer, now 26, shepherded the process, and her name is on the patent. "It took a ton of people, I'm just somebody who stuck with it the whole time," she said. GM like her work well enough to produce the "Day in the Life" segment above, five months before the world would hear about the console. Archer's path to engineering was as unlikely as getting the job for the console. She had entered Stanford with plans to be a doctor. But an innovation class during her freshman year, and a sophomore summer spent helping her grandfather rebuild a 1937 MG engine recharted her course. Her grandfather told her, "You know, you could be an engineer for a car company." Consumer reaction to Archer's work won't be far off, the SUVs slated to hit dealerships soon. Meanwhile, she's busy on something that could be just as intense as the console: Restoring a 1955 Packard Clipper in her garage. Head to Freep to check out the story of Archer and the console. Related Video: