2003 Chevrolet Monte Carlo Ss on 2040-cars

Auto blog

2013 Chevy COPO Camaro announced with two new engines and manual option

Chevrolet is following up the 2012 COPO Camaro with another limited run of the drag-strip-ready production car for 2013. Ditching the superchargers, the 2013 COPO Camaro can only be equipped with one of three naturally aspirated V8 engines, and other new features include the option of a manual transmission, new front springs, some minor styling changes and a lower starting price of $86,000. All cars are designed to abide by the rules of the NHRA's Stock Eliminator or Super Stock classifications, depending on in which series buyers wish to enter their Chevrolet Camaro.
Returning for 2013 is the 427-cubic-inch V8 producing 425 horsepower, but the new engines include a 325-hp 350-CID V8 and a 375-hp 396-CID V8. Buyers can select to purchase all three engines, and each will be matched with the sequence number of that car; the track-only COPO cars will not have vehicle identification numbers and can't be registered for street use.
Chevrolet is also offering unique enthusiast-specific options such as a COPO Build Book and the opportunity for owners to help assemble their car's engine at the Chevrolet Performance Build Center in Wixom, MI.

2022 Chevy Silverado ZR2 vs Ford F-150 Raptor and Ram 1500 TRX Spec Comparison

The 2022 Chevy Silverado refresh brings a new top dog off-road Chevy, the Silverado ZR2. It has the biggest V8 available, flashy looks, trick suspension and other off-road goodies. And naturally, that means people will be comparing it with the other top-rung off-road trucks, the Ford F-150 Raptor and the Ram 1500 TRX. As such, we've assembled the specifications available so far to see how the three super trucks compare. Having just been revealed, there are a few things we don't know about the ZR2, such as fuel economy and some other suspension details, but we know quite a lot. And from what we know, the ZR2 has some interesting positives and negatives compared to the other trucks. First, it's pretty clear that the ZR2 isn't as extreme as the Raptor and TRX. We wouldn't be surprised if Chevrolet insists they aren't direct competitors. Specifically it has the least power and torque by a fair margin, the smallest tires and the least ground clearance. Still, it's not completely fighting with an arm tied behind its back. It's the narrowest by a significant margin, which is good for tighter trails. It also has the best towing and payload capacity, and the approach, break-over and departure angles are quite competitive despite the "little" tires. It's also the only one to boast a locking front differential in addition to a rear locker. The Raptor can be had with a limited-slip front differential, and the TRX only gets an open front differential. Check out all the specific numbers in the chart below, as well as additional stories on the trucks featured below. Other reviews and deep dives about the new Silverado, F-150 Raptor and Ram 1500 TRX 2022 Chevy Silverado 1500 Reveal In addition to the new ZR2, the Silverado line also gets new interiors, an upgraded four-cylinder and other updates.   2021 Ram 1500 TRX First Drive Review Our review of the Raptor's chief competitor, the mighty TRX. That just sounds like we're talking about Jurassic Park.   2021 Ram TRX Suspension Deep Dive and RTI ramp test Follow along with engineer Dan Edmunds as he takes you under the TRX and explains everything there is to know about its suspension -- and how it's able to do what it does.

Why an independent rear suspension for GM's new, full-sized SUVs wasn't easy

A Motor Trend report last month laid out how Cadillac's 4.2-lier twin-turbo Blackwing V8 could be an orphan due to cost concerns in the GM empire. Last-minute chassis changes to Cadillac's new sedans and XT6 crossover led to engine bays that couldn't fit the Blackwing. On the SUV side, according to the report, the new independent rear suspension for big people haulers cost so much to implement that GM ruled out reworking the Escalade to accept the Blackwing. At least one commenter rightly asked how could a suspension swallow that much money. A new piece in Motor Trend has the answer. The excellent Alissa Priddle spoke to Tim Herrick, GM's executive chief engineer for full-size trucks, about why the clean-sheet IRS cost "multimillions of dollars."  First, GM would need to build a new body shop at the Arlington, Texas plant that assembles the automaker's big SUVs to stamp the numerous wholly new parts and panels accommodating an IRS. Then GM would need to design and pay for a new assembly process. On top of those up-front costs, there was the incremental cost of the four-link IRS components being more expensive than those in the trucks' former leaf-sprung solid axles. Herrick endured so many rejections for so long that he remembers the date and time when he got approval for the new unit. He said it came down to a meeting where he told a higher-up, "I'll make you a deal: If we get to the reveal, or if we launch this and you think this was a dumb idea, I'll hand you my badge and let you walk me out." Head to Motor Trend to read the full story. Based on Herrick being on stage to help present the new SUVs to the press, and on our First Ride in the new Chevrolet Tahoe and Suburban at GM's Milford Proving Grounds, it appears this will have a happy ending for all involved. Furthermore, since Herrick worked on the T1 platform that supports the big SUVs as well as the light- and heavy-duty pickups, he understood the demands on the commercial side, too. That could be why when Roadshow asked Tim Asoklis, chief engineer of the Tahoe and Suburban, if the new IRS could endure life in the Chevrolet Silverado and GMC Sierra, Asoklis answered, "Oh, absolutely." Related Video: