Bank Repo/no Reserve/below Wholesale on 2040-cars

Auto blog

GM learning from current Chevy Volt owners as it works on next-gen model

Details of the second-generation Chevrolet Volt extended-range plug-in hybrid are coming in at a trickle, and the latest is that the 2016 model-year Volt will be improved in all meaningful areas, including performance and all-electric range, says General Motors powertrain director Larry Nitz. 60 percent of Volt customers only charge using a standard 110 outlet. Nitz was speaking to Autoline After Hours about the current and future Volt. He said that GM has been tracking Volt driving habits and found that about two-thirds of the Volts' collective miles are driven in electric mode, and that 81 percent of all Volt trips were done in pure EV mode. Additionally, Volt drivers plug the car in 10 times each week, on average. Nitz also said 82 percent of the Volt's commuting miles are coming from the plug instead of the gas tank. Oh, and 60 percent of Volt customers only charge using a standard 110 outlet. Last month, GM released a teaser shot of the 2016 Volt (above) and said the car would make its worldwide debut at the 2015 North American International Auto Show next January. Earlier this year, the Volt was reported to be getting a new chassis for the upcoming version. The Volt could use a bit of new life. Through August, Volt sales were down 12 percent from a year earlier to 13,146 units, and sales plunged 25 percent alone. That compares unfavorably to the Nissan Leaf battery-electric vehicle, whose 2014 sales have jumped 34 percent to almost 19,000 units. You can see Nitz dish the goods in the video below (Volt comments start at around minute 15). You will also notice AutoblogGreen contributor Gary Witzenburg talk about his history with the EV1 and share his take on the Volt. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

GM extends production at Detroit factory until early 2020

General Motors Co said on Friday it had extended the production at its Detroit Hamtramck plant until January 2020, against an earlier plan to discontinue production in June this year. The No.1 U.S. automaker is revamping its operations, which include plant closures and thousands of job cuts, as it looks to boost profitability in the wake of declining U.S. auto sales. The Hamtramck plant will continue to produce the Chevrolet Impala and Cadillac CT6 sedans until early next year, the company said. "We are balancing production timing while continuing the availability of Cadillac advanced technology features currently included in the CT6-V — the Blackwing Twin-Turbo V-8 (engine) and Super Cruise (driver assistance system)," GM said. The plant has already discontinued production of the Buick LaCrosse sedan and Chevrolet Volt electric hybrid car. Detroit-based union United Auto Workers' President Gary Jones said GM's decision to continue production at the plant was a relief for the workers as well as their families. "We commend GM for today's decision and we reiterate the importance of a collective bargaining process in times like these," Jones said. Reporting by Ankit Ajmera. Related Video:

Driving Granatelli's turbine-powered 1978 Chevy Corvette [w/video]

With its curvy snout and feminine haunches, the third-gen Chevrolet Corvette looks like a dreamy – if dated – exemplar of Sports Car Fantasy 101 when viewed through modern eyes. This particular specimen circa '78, clad in silver and black paint with red pinstripes, appears to be a well-preserved example from the era. Apart from its low-profile Pirellis, slightly raised and slotted hood, spacious stance and a certain hand-painted descriptor alongside its crossed flag logos, you'd never guess there's a Space-Age propulsion unit powering this Coke bottle-bodied ride. Climb inside, and you're presented with aircraft gauges and big, colorful square buttons in the center panel. It takes a push of the "Ignitor" button, a tap of the starter button, and a slide of a T-handle for this nearly 40-year-old sports car to start sounding like Gulfstream G650 ready for takeoff. Yep, you're sitting in an 880-horsepower, turbine-powered Corvette, the only one of its kind in the world. Welcome to the whoosh. What The...? Built by Vince Granatelli, son of Indy 500 guru Andy Granatelli, this curious Corvette came into being by cramming a Pratt & Whitney ST6N-74 gas turbine engine into the donor car's lengthy front end. The same type of Jet A-burning mill powered Granatelli Senior's STP-sponsored racecar at the 1967 Indianapolis 500, where it famously led most of the 198 of 200 laps until a $6 transmission bearing failed, knocking it out of the race. The idea of turbine power usurping internal combustion was so threatening that Indy's governing body restricted turbine performance into obsolescence thereafter. A turbine-powered Corvette sounds excessive because it is. But there are also things about this 880-horsepower, 1,161-pound-feet monster that might surprise you. While it smacks of futurist exoticism and cost a then-dizzying $37,000 in 1967, the Canadian-built powerplant uses 80 percent fewer parts than an internal combustion V8 and will run on virtually anything combustible – whiskey, diesel, even Chanel No. 5. Though it's triple the length of a V8, the Pratt & Whitney beast weighs only 285 pounds. It's also one hell of a robust workhorse, typically serving as an auxiliary power unit for commercial aircraft or a generator in oil fields, where it can run for tens of thousands of consecutive hours before needing an overhaul. To adapt the Chevrolet for jet duty, the nose section was gutted and a sub-frame was built to compensate for the loosey-goosey front end.